Thore C250 Revolution User manual
3 52 4
Experience every note in beautiful high-res detail
with the Thore C250 Revolution headphones.
The pair provides rich immersive sound - bass is
firm and weighted while the mids and highs are
clear and vibrant with excellent detail.
Sink in to enjoy the comfort of protein leather ear
cups bolstered with Allora memory foam.
Our bet? You’ll never go back to earbuds.
We recommended taking a few moments to read
through this guide and get to know all the great
features your C250 Revolution has to offer.
enter pairing mode indicated by a voice prompt and the
LED indicator flashing blue and red alternately (for pairing
instructions, see the Pairing section, step 2).
Power Off
Press for four seconds, a voice prompt will indicate that the
Headphones have powered off.
Pairing
1. With Headphones powered off, press and hold for three
seconds, a voice prompt will indicate that the Headphones
have entered pairing mode and the LED indicator will flash
blue and red alternately.
2. Enable Bluetooth on mobile device (for detailed information,
refer to the user manual of the mobile device).
3. On mobile device, select “C250” (the Headphones) in the
pairing list, if prompted for a Password, (sometimes called a
“Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device
have paired.
Note: Pairing mode will automatically be canceled after three minutes. To
re-enter pairing mode, see pairing instructions.
Charging
Connect charging cable to power source and to charging port on
Headphones. (Charging port is under rubber cover on bottom of
right earphone).
LED indicator will turn red during charging and turn off when
fully charged.
For optimal battery performance, fully charge for three hours
before first use.
Headphones will power off when charger cable is connected, you
may power on while charging.
Headphone battery level will be visible on the connected device
that supports this feature.
Power On
Press for two seconds, a voice prompt will indicate that the
Headphones have powered on.
Once powered on, the Headphones will attempt to connect with a
previously paired device.
On first power on, and when Headphones do not detect a
previously paired device, the Headphones will automatically
Overview of Wireless Headphones
Volume Down / Previous
Volume Up / Next
LED Indicator
MFB (Multi-functional Button)
Mic
Charging Port (Micro USB)
Audio Port (3.5mm Line in)
3 52 4
Experience every note in beautiful high-res detail
with the Thore C250 Revolution headphones.
The pair provides rich immersive sound - bass is
firm and weighted while the mids and highs are
clear and vibrant with excellent detail.
Sink in to enjoy the comfort of protein leather ear
cups bolstered with Allora memory foam.
Our bet? You’ll never go back to earbuds.
We recommended taking a few moments to read
through this guide and get to know all the great
features your C250 Revolution has to offer.
enter pairing mode indicated by a voice prompt and the
LED indicator flashing blue and red alternately (for pairing
instructions, see the Pairing section, step 2).
Power Off
Press for four seconds, a voice prompt will indicate that the
Headphones have powered off.
Pairing
1. With Headphones powered off, press and hold for three
seconds, a voice prompt will indicate that the Headphones
have entered pairing mode and the LED indicator will flash
blue and red alternately.
2. Enable Bluetooth on mobile device (for detailed information,
refer to the user manual of the mobile device).
3. On mobile device, select “C250” (the Headphones) in the
pairing list, if prompted for a Password, (sometimes called a
“Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device
have paired.
Note: Pairing mode will automatically be canceled after three minutes. To
re-enter pairing mode, see pairing instructions.
Charging
Connect charging cable to power source and to charging port on
Headphones. (Charging port is under rubber cover on bottom of
right earphone).
LED indicator will turn red during charging and turn off when
fully charged.
For optimal battery performance, fully charge for three hours
before first use.
Headphones will power off when charger cable is connected, you
may power on while charging.
Headphone battery level will be visible on the connected device
that supports this feature.
Power On
Press for two seconds, a voice prompt will indicate that the
Headphones have powered on.
Once powered on, the Headphones will attempt to connect with a
previously paired device.
On first power on, and when Headphones do not detect a
previously paired device, the Headphones will automatically
Overview of Wireless Headphones
Volume Down / Previous
Volume Up / Next
LED Indicator
MFB (Multi-functional Button)
Mic
Charging Port (Micro USB)
Audio Port (3.5mm Line in)
3 52 4
Experience every note in beautiful high-res detail
with the Thore C250 Revolution headphones.
The pair provides rich immersive sound - bass is
firm and weighted while the mids and highs are
clear and vibrant with excellent detail.
Sink in to enjoy the comfort of protein leather ear
cups bolstered with Allora memory foam.
Our bet? You’ll never go back to earbuds.
We recommended taking a few moments to read
through this guide and get to know all the great
features your C250 Revolution has to offer.
enter pairing mode indicated by a voice prompt and the
LED indicator flashing blue and red alternately (for pairing
instructions, see the Pairing section, step 2).
Power Off
Press for four seconds, a voice prompt will indicate that the
Headphones have powered off.
Pairing
1. With Headphones powered off, press and hold for three
seconds, a voice prompt will indicate that the Headphones
have entered pairing mode and the LED indicator will flash
blue and red alternately.
2. Enable Bluetooth on mobile device (for detailed information,
refer to the user manual of the mobile device).
3. On mobile device, select “C250” (the Headphones) in the
pairing list, if prompted for a Password, (sometimes called a
“Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device
have paired.
Note: Pairing mode will automatically be canceled after three minutes. To
re-enter pairing mode, see pairing instructions.
Charging
Connect charging cable to power source and to charging port on
Headphones. (Charging port is under rubber cover on bottom of
right earphone).
LED indicator will turn red during charging and turn off when
fully charged.
For optimal battery performance, fully charge for three hours
before first use.
Headphones will power off when charger cable is connected, you
may power on while charging.
Headphone battery level will be visible on the connected device
that supports this feature.
Power On
Press for two seconds, a voice prompt will indicate that the
Headphones have powered on.
Once powered on, the Headphones will attempt to connect with a
previously paired device.
On first power on, and when Headphones do not detect a
previously paired device, the Headphones will automatically
Overview of Wireless Headphones
Volume Down / Previous
Volume Up / Next
LED Indicator
MFB (Multi-functional Button)
Mic
Charging Port (Micro USB)
Audio Port (3.5mm Line in)
3 52 4
Experience every note in beautiful high-res detail
with the Thore C250 Revolution headphones.
The pair provides rich immersive sound - bass is
firm and weighted while the mids and highs are
clear and vibrant with excellent detail.
Sink in to enjoy the comfort of protein leather ear
cups bolstered with Allora memory foam.
Our bet? You’ll never go back to earbuds.
We recommended taking a few moments to read
through this guide and get to know all the great
features your C250 Revolution has to offer.
enter pairing mode indicated by a voice prompt and the
LED indicator flashing blue and red alternately (for pairing
instructions, see the Pairing section, step 2).
Power Off
Press for four seconds, a voice prompt will indicate that the
Headphones have powered off.
Pairing
1. With Headphones powered off, press and hold for three
seconds, a voice prompt will indicate that the Headphones
have entered pairing mode and the LED indicator will flash
blue and red alternately.
2. Enable Bluetooth on mobile device (for detailed information,
refer to the user manual of the mobile device).
3. On mobile device, select “C250” (the Headphones) in the
pairing list, if prompted for a Password, (sometimes called a
“Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device
have paired.
Note: Pairing mode will automatically be canceled after three minutes. To
re-enter pairing mode, see pairing instructions.
Charging
Connect charging cable to power source and to charging port on
Headphones. (Charging port is under rubber cover on bottom of
right earphone).
LED indicator will turn red during charging and turn off when
fully charged.
For optimal battery performance, fully charge for three hours
before first use.
Headphones will power off when charger cable is connected, you
may power on while charging.
Headphone battery level will be visible on the connected device
that supports this feature.
Power On
Press for two seconds, a voice prompt will indicate that the
Headphones have powered on.
Once powered on, the Headphones will attempt to connect with a
previously paired device.
On first power on, and when Headphones do not detect a
previously paired device, the Headphones will automatically
Overview of Wireless Headphones
Volume Down / Previous
Volume Up / Next
LED Indicator
MFB (Multi-functional Button)
Mic
Charging Port (Micro USB)
Audio Port (3.5mm Line in)
3 52 4
Experience every note in beautiful high-res detail
with the Thore C250 Revolution headphones.
The pair provides rich immersive sound - bass is
firm and weighted while the mids and highs are
clear and vibrant with excellent detail.
Sink in to enjoy the comfort of protein leather ear
cups bolstered with Allora memory foam.
Our bet? You’ll never go back to earbuds.
We recommended taking a few moments to read
through this guide and get to know all the great
features your C250 Revolution has to offer.
enter pairing mode indicated by a voice prompt and the
LED indicator flashing blue and red alternately (for pairing
instructions, see the Pairing section, step 2).
Power Off
Press for four seconds, a voice prompt will indicate that the
Headphones have powered off.
Pairing
1. With Headphones powered off, press and hold for three
seconds, a voice prompt will indicate that the Headphones
have entered pairing mode and the LED indicator will flash
blue and red alternately.
2. Enable Bluetooth on mobile device (for detailed information,
refer to the user manual of the mobile device).
3. On mobile device, select “C250” (the Headphones) in the
pairing list, if prompted for a Password, (sometimes called a
“Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device
have paired.
Note: Pairing mode will automatically be canceled after three minutes. To
re-enter pairing mode, see pairing instructions.
Charging
Connect charging cable to power source and to charging port on
Headphones. (Charging port is under rubber cover on bottom of
right earphone).
LED indicator will turn red during charging and turn off when
fully charged.
For optimal battery performance, fully charge for three hours
before first use.
Headphones will power off when charger cable is connected, you
may power on while charging.
Headphone battery level will be visible on the connected device
that supports this feature.
Power On
Press for two seconds, a voice prompt will indicate that the
Headphones have powered on.
Once powered on, the Headphones will attempt to connect with a
previously paired device.
On first power on, and when Headphones do not detect a
previously paired device, the Headphones will automatically
Overview of Wireless Headphones
Volume Down / Previous
Volume Up / Next
LED Indicator
MFB (Multi-functional Button)
Mic
Charging Port (Micro USB)
Audio Port (3.5mm Line in)
6 8 107 9
FCC Compliant
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Support
As with all Thore products, the Thore C250 Wireless Headphones
is backed by our quality assurance and satisfaction guarantee.
If you should experience any technical or performance issues
with your device, or if you simply have a question or inquiry,
we invite you to contact our customer service department at
hello@ThoreAudio.com, and we will do everything we can to help
resolve the issue.
When cleaning, use a soft cloth, if necessary dampened with a
minimum amount of water or diluted mild soap.
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between -15ºC
(5ºF) and 55ºC (131ºF) (up to 90% relative humidity.
Battery life may vary depending on climate.
To avoid hearing damage, limit use at high volume and set the
volume to a safe level.
Using headphones with both ears covered while driving is not
recommended and may be illegal in some areas.
Warranty
Your new Thore C250 Wireless Headphones is covered by a Limited
Manufacturer’s Warranty. Details of the warranty are as follows:
for a period of one (1) year from the date of retail purchase, Thore
warrants that this product is free of any defects in manufacturing,
materials and workmanship. During the warranty period, we shall,
at our sole discretion, repair or replace any defective parts within
a reasonable period of time and free of charge. Return shipping
charges are excluded from warranty coverage.
LED Indicator
Blue and red flashing alternately..........Pairing
Blue flashing fast every five seconds ....Paired
Blue flashing slow every five seconds...Calling
Red solid ................................................Charging
Purple solid............................................Removing Paired Devices
Specifications
Wireless BT Version: 4.1
Frequency: 2.402-2.480GHz
Support Mode: HSP HFP A2DP AVRCP
Operating range: Up to 10 meters (33 feet)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
Power off before placing in snug places such as handbag or suitcase.
Mobile devices and media apps can change the standard functionality of media
and phone buttons. Please consult with Devices manufacture or app developer
should functionality differ than described.
Using Headphones with a Wire
Connect audio cable to audio port on Headphones and to an
audio source. (Connecting an audio cable to Headphones will
automatically power off Headphones. Headphones operate in
wired mode when powered off.)
Media and phone call control buttons only function when
Headphones are in wireless mode or when using an audio cable
that supports such functionality.
Battery Life
Talk: 10-15 Hours
Music: 8-15 Hours
Standby: 250 Hours
Full-charge: 3 Hours
Remove Paired Devices
1. Powered off
2. Press and hold and for ten seconds (LED indicator with
turn purple)
3. Power off (Depending on paired devices, a power cycle may
be necessary. To power cycle, unplugged Headphones,
connect power cable until LED indicator turns red, then
unplug.)
Media and Phone Control
Volume: Press or until desired volume is reached.
Play and Pause: While media app is open on connected device,
press to Play or Pause.
Previous and Next: While media app is open on connected device,
Press and hold or to navigate between tracks.
Answer Call: During incoming call, Press once.
Reject Call: During incoming call, Press twice.
Ending Call: During call, Press .
Redial Last Number: Not during call, Press twice.
6 8 107 9
FCC Compliant
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Support
As with all Thore products, the Thore C250 Wireless Headphones
is backed by our quality assurance and satisfaction guarantee.
If you should experience any technical or performance issues
with your device, or if you simply have a question or inquiry,
we invite you to contact our customer service department at
hello@ThoreAudio.com, and we will do everything we can to help
resolve the issue.
When cleaning, use a soft cloth, if necessary dampened with a
minimum amount of water or diluted mild soap.
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between -15ºC
(5ºF) and 55ºC (131ºF) (up to 90% relative humidity.
Battery life may vary depending on climate.
To avoid hearing damage, limit use at high volume and set the
volume to a safe level.
Using headphones with both ears covered while driving is not
recommended and may be illegal in some areas.
Warranty
Your new Thore C250 Wireless Headphones is covered by a Limited
Manufacturer’s Warranty. Details of the warranty are as follows:
for a period of one (1) year from the date of retail purchase, Thore
warrants that this product is free of any defects in manufacturing,
materials and workmanship. During the warranty period, we shall,
at our sole discretion, repair or replace any defective parts within
a reasonable period of time and free of charge. Return shipping
charges are excluded from warranty coverage.
LED Indicator
Blue and red flashing alternately..........Pairing
Blue flashing fast every five seconds ....Paired
Blue flashing slow every five seconds...Calling
Red solid ................................................Charging
Purple solid............................................Removing Paired Devices
Specifications
Wireless BT Version: 4.1
Frequency: 2.402-2.480GHz
Support Mode: HSP HFP A2DP AVRCP
Operating range: Up to 10 meters (33 feet)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
Power off before placing in snug places such as handbag or suitcase.
Mobile devices and media apps can change the standard functionality of media
and phone buttons. Please consult with Devices manufacture or app developer
should functionality differ than described.
Using Headphones with a Wire
Connect audio cable to audio port on Headphones and to an
audio source. (Connecting an audio cable to Headphones will
automatically power off Headphones. Headphones operate in
wired mode when powered off.)
Media and phone call control buttons only function when
Headphones are in wireless mode or when using an audio cable
that supports such functionality.
Battery Life
Talk: 10-15 Hours
Music: 8-15 Hours
Standby: 250 Hours
Full-charge: 3 Hours
Remove Paired Devices
1. Powered off
2. Press and hold and for ten seconds (LED indicator with
turn purple)
3. Power off (Depending on paired devices, a power cycle may
be necessary. To power cycle, unplugged Headphones,
connect power cable until LED indicator turns red, then
unplug.)
Media and Phone Control
Volume: Press or until desired volume is reached.
Play and Pause: While media app is open on connected device,
press to Play or Pause.
Previous and Next: While media app is open on connected device,
Press and hold or to navigate between tracks.
Answer Call: During incoming call, Press once.
Reject Call: During incoming call, Press twice.
Ending Call: During call, Press .
Redial Last Number: Not during call, Press twice.
6 8 107 9
FCC Compliant
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Support
As with all Thore products, the Thore C250 Wireless Headphones
is backed by our quality assurance and satisfaction guarantee.
If you should experience any technical or performance issues
with your device, or if you simply have a question or inquiry,
we invite you to contact our customer service department at
hello@ThoreAudio.com, and we will do everything we can to help
resolve the issue.
When cleaning, use a soft cloth, if necessary dampened with a
minimum amount of water or diluted mild soap.
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between -15ºC
(5ºF) and 55ºC (131ºF) (up to 90% relative humidity.
Battery life may vary depending on climate.
To avoid hearing damage, limit use at high volume and set the
volume to a safe level.
Using headphones with both ears covered while driving is not
recommended and may be illegal in some areas.
Warranty
Your new Thore C250 Wireless Headphones is covered by a Limited
Manufacturer’s Warranty. Details of the warranty are as follows:
for a period of one (1) year from the date of retail purchase, Thore
warrants that this product is free of any defects in manufacturing,
materials and workmanship. During the warranty period, we shall,
at our sole discretion, repair or replace any defective parts within
a reasonable period of time and free of charge. Return shipping
charges are excluded from warranty coverage.
LED Indicator
Blue and red flashing alternately..........Pairing
Blue flashing fast every five seconds ....Paired
Blue flashing slow every five seconds...Calling
Red solid ................................................Charging
Purple solid............................................Removing Paired Devices
Specifications
Wireless BT Version: 4.1
Frequency: 2.402-2.480GHz
Support Mode: HSP HFP A2DP AVRCP
Operating range: Up to 10 meters (33 feet)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
Power off before placing in snug places such as handbag or suitcase.
Mobile devices and media apps can change the standard functionality of media
and phone buttons. Please consult with Devices manufacture or app developer
should functionality differ than described.
Using Headphones with a Wire
Connect audio cable to audio port on Headphones and to an
audio source. (Connecting an audio cable to Headphones will
automatically power off Headphones. Headphones operate in
wired mode when powered off.)
Media and phone call control buttons only function when
Headphones are in wireless mode or when using an audio cable
that supports such functionality.
Battery Life
Talk: 10-15 Hours
Music: 8-15 Hours
Standby: 250 Hours
Full-charge: 3 Hours
Remove Paired Devices
1. Powered off
2. Press and hold and for ten seconds (LED indicator with
turn purple)
3. Power off (Depending on paired devices, a power cycle may
be necessary. To power cycle, unplugged Headphones,
connect power cable until LED indicator turns red, then
unplug.)
Media and Phone Control
Volume: Press or until desired volume is reached.
Play and Pause: While media app is open on connected device,
press to Play or Pause.
Previous and Next: While media app is open on connected device,
Press and hold or to navigate between tracks.
Answer Call: During incoming call, Press once.
Reject Call: During incoming call, Press twice.
Ending Call: During call, Press .
Redial Last Number: Not during call, Press twice.
6 8 107 9
FCC Compliant
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Support
As with all Thore products, the Thore C250 Wireless Headphones
is backed by our quality assurance and satisfaction guarantee.
If you should experience any technical or performance issues
with your device, or if you simply have a question or inquiry,
we invite you to contact our customer service department at
hello@ThoreAudio.com, and we will do everything we can to help
resolve the issue.
When cleaning, use a soft cloth, if necessary dampened with a
minimum amount of water or diluted mild soap.
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between -15ºC
(5ºF) and 55ºC (131ºF) (up to 90% relative humidity.
Battery life may vary depending on climate.
To avoid hearing damage, limit use at high volume and set the
volume to a safe level.
Using headphones with both ears covered while driving is not
recommended and may be illegal in some areas.
Warranty
Your new Thore C250 Wireless Headphones is covered by a Limited
Manufacturer’s Warranty. Details of the warranty are as follows:
for a period of one (1) year from the date of retail purchase, Thore
warrants that this product is free of any defects in manufacturing,
materials and workmanship. During the warranty period, we shall,
at our sole discretion, repair or replace any defective parts within
a reasonable period of time and free of charge. Return shipping
charges are excluded from warranty coverage.
LED Indicator
Blue and red flashing alternately..........Pairing
Blue flashing fast every five seconds ....Paired
Blue flashing slow every five seconds...Calling
Red solid ................................................Charging
Purple solid............................................Removing Paired Devices
Specifications
Wireless BT Version: 4.1
Frequency: 2.402-2.480GHz
Support Mode: HSP HFP A2DP AVRCP
Operating range: Up to 10 meters (33 feet)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
Power off before placing in snug places such as handbag or suitcase.
Mobile devices and media apps can change the standard functionality of media
and phone buttons. Please consult with Devices manufacture or app developer
should functionality differ than described.
Using Headphones with a Wire
Connect audio cable to audio port on Headphones and to an
audio source. (Connecting an audio cable to Headphones will
automatically power off Headphones. Headphones operate in
wired mode when powered off.)
Media and phone call control buttons only function when
Headphones are in wireless mode or when using an audio cable
that supports such functionality.
Battery Life
Talk: 10-15 Hours
Music: 8-15 Hours
Standby: 250 Hours
Full-charge: 3 Hours
Remove Paired Devices
1. Powered off
2. Press and hold and for ten seconds (LED indicator with
turn purple)
3. Power off (Depending on paired devices, a power cycle may
be necessary. To power cycle, unplugged Headphones,
connect power cable until LED indicator turns red, then
unplug.)
Media and Phone Control
Volume: Press or until desired volume is reached.
Play and Pause: While media app is open on connected device,
press to Play or Pause.
Previous and Next: While media app is open on connected device,
Press and hold or to navigate between tracks.
Answer Call: During incoming call, Press once.
Reject Call: During incoming call, Press twice.
Ending Call: During call, Press .
Redial Last Number: Not during call, Press twice.
6 8 107 9
FCC Compliant
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Support
As with all Thore products, the Thore C250 Wireless Headphones
is backed by our quality assurance and satisfaction guarantee.
If you should experience any technical or performance issues
with your device, or if you simply have a question or inquiry,
we invite you to contact our customer service department at
hello@ThoreAudio.com, and we will do everything we can to help
resolve the issue.
When cleaning, use a soft cloth, if necessary dampened with a
minimum amount of water or diluted mild soap.
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between -15ºC
(5ºF) and 55ºC (131ºF) (up to 90% relative humidity.
Battery life may vary depending on climate.
To avoid hearing damage, limit use at high volume and set the
volume to a safe level.
Using headphones with both ears covered while driving is not
recommended and may be illegal in some areas.
Warranty
Your new Thore C250 Wireless Headphones is covered by a Limited
Manufacturer’s Warranty. Details of the warranty are as follows:
for a period of one (1) year from the date of retail purchase, Thore
warrants that this product is free of any defects in manufacturing,
materials and workmanship. During the warranty period, we shall,
at our sole discretion, repair or replace any defective parts within
a reasonable period of time and free of charge. Return shipping
charges are excluded from warranty coverage.
LED Indicator
Blue and red flashing alternately..........Pairing
Blue flashing fast every five seconds ....Paired
Blue flashing slow every five seconds...Calling
Red solid ................................................Charging
Purple solid............................................Removing Paired Devices
Specifications
Wireless BT Version: 4.1
Frequency: 2.402-2.480GHz
Support Mode: HSP HFP A2DP AVRCP
Operating range: Up to 10 meters (33 feet)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
Power off before placing in snug places such as handbag or suitcase.
Mobile devices and media apps can change the standard functionality of media
and phone buttons. Please consult with Devices manufacture or app developer
should functionality differ than described.
Using Headphones with a Wire
Connect audio cable to audio port on Headphones and to an
audio source. (Connecting an audio cable to Headphones will
automatically power off Headphones. Headphones operate in
wired mode when powered off.)
Media and phone call control buttons only function when
Headphones are in wireless mode or when using an audio cable
that supports such functionality.
Battery Life
Talk: 10-15 Hours
Music: 8-15 Hours
Standby: 250 Hours
Full-charge: 3 Hours
Remove Paired Devices
1. Powered off
2. Press and hold and for ten seconds (LED indicator with
turn purple)
3. Power off (Depending on paired devices, a power cycle may
be necessary. To power cycle, unplugged Headphones,
connect power cable until LED indicator turns red, then
unplug.)
Media and Phone Control
Volume: Press or until desired volume is reached.
Play and Pause: While media app is open on connected device,
press to Play or Pause.
Previous and Next: While media app is open on connected device,
Press and hold or to navigate between tracks.
Answer Call: During incoming call, Press once.
Reject Call: During incoming call, Press twice.
Ending Call: During call, Press .
Redial Last Number: Not during call, Press twice.
Table of contents
