Avantree HT5009 User manual

User Manual
Wireless Headphones
and Transmitter Set
HT5009
What’s in the box?·······················································································································································································1
Products overview ······················································································································································································1
LED indication & voice prompts·····························································································································································2
Turn on HT5009····························································································································································································2
Use HT5009 with your TV ·········································································································································································3
Check your TVs output options before the set up···················································································································3
TVs with OPTICAL audio out····························································································································································4
TVs with AUX/3.5mm audio out ·····················································································································································4
TVs with RCA Audio Out (Red/White ports labeled "AUDIO OUT")····················································································5
Use HT5009 with your AV Receiver with 6.35mm PHONE jack···································································································6
Use the headphones independently with cellphone ····················································································································6
Add a 2nd pair of Bluetooth headphones············································································································································7
Charging headphones···············································································································································································7
Clear pairing history···················································································································································································8
Troubleshooting ··························································································································································································8

1
What’s in the box?
1. AS9S BT Headphones
2. Oasis Plus BT Transmitter
3. Optical Audio Cable
4. 3.5mm Audio Cable
5. 3.5mm to RCA Audio Cable
6. Micro USB Power Cable*2
Products overview

2
LED indication & voice prompts
1) LED indicators of the transmitter (Oasis Plus)
Status LEDs indication
Pairing LED “TX” ashes alternating GREEN and WHITE
Connected with AS9S LED “A” is on
Connected with 2nd headphones LED “B” is on
Reconnecting LED “TX” ashes WHITE once per second
2) LED Indictors & voice prompts of headphones (AS9S)
Status Status Voice prompt
Power on BLUE LED is on for 1 second Welcome to Avantree
Power o RED LED is on for 2 seconds, then turn o Good bye
Pairing RED and BLUE LED ashes alternately Pairing
Connected with Oasis Plus BLUE LED on Connected
Reconnecting BLUE LED ashes once per 2 seconds NA
Charging/Charging
completed RED LED on/o NA
Low battery RED LED ashes Low battery
Turn on HT5009
1) Powering up the transmitter
Power up the transmitter with the USB cable provided. Connect it to a TV USB port (TV needs to be turned
on) or any other USB charger that supports 5V/500mA-2A.
2) Turn on both devices
Turn on the transmitter – Slide Mode switch to “TX” position, the “TX” LED will start ashing WHITE.

3
RX
Bypass
TX
OFF
Turn on the headphone – Press and hold for 2 seconds until you see the BLUE LED light.
They will auto-reconnect, indicators are: 1) Headphones says” Welcome to Avantree. Connected”. 2)
Transmitter says “Connected. Ready for use.” The “TX” LED will stop ashing and “A” LED will light up.
Connected
Turn SOLID BLUE
AUX
OPT
SBC
APTX RX
TX A
B
LL
HD
AUX
VOICE
OPT
Use HT5009 with your TV
Check your TVs output options before the set up

4
TVs with OPTICAL audio out
Now you should be able to use the headphone. IF there’s no sound:
a. Ensure the transmitter LED“OPT” is on. If not, short press AUX
OPT once.
b. Ensure your TV speaker is set to “External Speaker”.
c. Ensure TV Audio Format is set to “PCM” or “DOLBY/DTS”is o (This is IMPORTANT).
Set TV Speakers to "External Speaker" Set TV Audio Format to "PCM"(IMPORTANT)
TVs with AUX/3.5mm audio out