Tibek AMR50-226 User manual

ELECTRIC HOT POT
INSTRUCTION MANUAL
MODEL:AMR50-226
READ THIS MANUAL THOROUGHLY
BEFORE USING AND SAVE IT FOR FUTURE REFERENCE
HOUSEHOLD USE ONLY
Shenzhen Luoteman Trade Limited Co.,LTD
Longgang District Longcheng Street Longxiang Avenue
No. 5105 Yuanjing Garden No. 209 ShenZhen GuangDong 518000
Facebook Page: https://www.facebook.com/TIBEK.CC/
Made In China

Contents
Introduction………………………………………………………………2
Chapter 1 Safety Precautions…………………….……………….………2
Chapter 2 Names of Product Parts …….…………………………………5
Chapter 3 Usage………….…….…….….…….……………………..……5
Chapter 4 Care and Maintenance …………………………….………….6
Chapter 5 Safety Indicators of Product .………………………….….……6
Chapter 6 Failure Analysis and Troubleshooting…………………………6
Electrical Schematic Diagram………………………….………….………7
1

Introduction
1. This product has multiple functions, including steaming, boiling, stewing, hot pot, etc.
2. With automatic temperature control device, heating will stop automatically when the
internal temperature reaches the set value.
3. Fire is controlled by a knob.
4. The product is equipped with electronic components with excellent performance, and
is featured of safety, reliability, long life, high thermal efficiency, time and electricity saving.
5. The pot body adopts the process of one-time die-cast formation, with high density, high
strength, deformation free, even heating, non-stick coating surface, and excellent
anti-sticking effect.
Chapter 1 Safety Precautions
IMPORTANT SAFE-GUARDS
Warning：
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Read all Instructions
1. Must be vigilant to risks that may result in hazards, serious injuries, or major
property damage .
2. To prevent personal injury, do not touch hot surface.
Caution：Must be aware of the risks that may result in personal injury or damage
to the item.
1. This product is not suitable for children or individuals with physical, sensory or mental
disabilities, unless they are supervised and directed by their keepers regarding the use of
the product. Children should be supervised to ensure that they do not play with the
product.
2. This product is for home use only. The company does not assume any responsibility for
any commercial use, improper use or the use failing to comply with this manual. Such
failure is not covered by the warranty.
3. Do not burn the product without anything in it, otherwise it may cause short circuit and
device damage.
4. After opening the package, please put the plastic bag into the bin immediately to avoid
being contacted by the children and posing a risk of suffocation.
5. Make sure that the power cord does not come in contact with sharp edges, burrs, other
protruding sharp objects, or surfaces that are hot to prevent leakage, or resulting in
electric shock or fire.
6. Before connecting to the power supply, check whether the marked voltage of the
product matches the voltage of the power supply in order to avoid component damage
or fire.
7. It is necessary to use a grounded socket with a size of 15A or above. The plug must be
inserted completely into the socket to prevent contact damage and overheating of the
components, or causing short circuit or fire.
8. Please use the product on a horizontal platform. Do not operate it on carpets, towels,
plastics, paper or other flammable materials to prevent fire.
9. Do not use it on an unstable, humid, high-temperature, smooth, or heat-resistant
surface to avoid injury or property damage due to electric shock, fire or falling.
10. Do not place this product near high temperature, strong magnetic, flammable or
explosive gases (such as natural gas, biogas, etc.) to prevent component damage,
malfunction or fire. Allow enough space around the product to maintain a minimum
distance of 10cm from the surrounding objects.
11. Do not use this product under or near combustible materials such as curtains, closets,
etc. to prevent fire.
12. Do not leave the product unattended to prevent the danger of fire and other hazards
caused by the burning of the foods.
13. When the product is used for the first time, a small amount of soot may be evaporated,
which is normal.
14. It is normal for parts to squeak when the parts contract and expand in use due to
changes in the internal temperature.
15. Do not put any bagged, canned, or bottled items on the product or in the heating
plate while the product is in operation. Doing so may cause damage to the device, fire or
other hazards.
16. When using this product, do not place excessively sharp objects, flammable materials
such as paper and plastic on the heating plate. Doing so may cause damage to the device
and fire.
17. Do not operate this product by an external timer or a separate remote control system
to prevent short circuits, spontaneous combustion or other hazards.
18. Pay attention to the steam when opening the lid to prevent the steam from causing
burns.
19. Do not allow the power supply to contact the heating plate, metal cover, or other high
temperature parts while the product is in operation.
20. This product cannot be burned without anything in it for a long time. It is recommend-
ed not to use it continuously for more than 3 hours to prevent the heating plate from
cracking or spontaneous combustion caused by overheating, resulting in injury or proper-
ty damage.
21. Please wipe the spilled oil in time. Do not allow the oil to flow into the interior of the
product. This may cause a risk of personal injury and property damage due to short circuit
and electric shock.
22. During work, the product will produce high temperatures and steaming. Do not touch
with your hands or put it close to your face to prevent burns.
23. Be careful of high temperatures when removing food to avoid scalding.
24. Do not cut food with knife or metal utensils in the pot. Do not scrub the pot with metal
or rough objects to avoid damage to the non-stick coating.
25. Do not insert/pull plugs by a wet hand or clean the socket with a damp cloth. Doing
so may cause electric shock or other hazards.
26. When unplugging, it is necessary to grasp the plug. Do not yank or distort the power
cord to prevent the power cord from being damaged, causing a risk of electrical leakage.
27.When the product is not in use, is being cleaned or moved, or when there is a problem,
the power supply must be disconnected. Otherwise, there may be a risk of electric shock
or fire.
28. In case of the product malfunctions or damage, please stop using it. Do not repair it
2 3

Chapter 2 Names of Product Parts
Chapter 3 Usage
Operation Panel：
by yourself to avoid danger.
29. If the power cord is damaged, it must be replaced by the manufacturer, its service
department, or a similar person to avoid a hazard.
30. Please cut off the power supply after the use of the product, and clean the body and
surface of the pot after it has cooled down to prevent the remaining food, grease, etc. from
smoking or catching fire during the baking.
31. To protect against electric shock do not immerse cord, plugs, or (applicant or
Probe-Type Temperature Control) in water or other liquid.
32. This product must be used with the matched connector.
33. This product is intended for home use only and not for commercial use.
34. Do not touch hot surfaces. Use handles or knobs..
35.Use only Foshan Yiheng-Xiang Electric Aappliance Co.,Ltd. JH005-4 temperature-con
-trolling plug.
36. Close supervision is necessary when any appliance is used by or near children.
37. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning the appliance.
38. Do not operate any appliance with a damaged cord or plug or after the appliancemal-
functions, or has been damaged in any manner. Return appliance to the nearest autho-
rized service facility for examination, repair or adjustment.
39. The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
40. Do not use outdoors.this appliance is recommended for household use only.
41. Do not let cord hang over edge of table or counter, or touch hot surfaces.
42. Do not place on or near a hot gas or electric burner, or in a heated oven.
43. Extreme caution must be used when moving an appliance containing hot oil or other
hot liquids.
44. Always attach plug to appliance first, then plug cord in the wall outlet. To disconnect,
turn any control to "off" then remove plug from wall outlet.
45. Do not use appliance for other than intended use.
46.This appliance is not intended for deep frying foods."
47.CAUTION: Do not use an extension cord.
.SAVE THESE INSTRUCTIONS .
Operating steps：
1. When it is used for the first time, wipe the inner pot clean with a damp cloth, and then
rub a small amount of edible oil.
2. Plug in the power plug and turn the knob to operate different temperatures for opera-
tion. The triangle symbol refers to its working position.
3. The following description is given in the energized state.
OFF: Turning the knob to make the triangle symbol indicate "OFF" to turn off the power.
The power cord can be unplugged in this case.
ON: Turning the knob to make the triangle symbol indicate "OFF" to start heating the pot.
Warning：During use, it is forbidden to touch the pot body and the surface of the
product by hand to avoid scalding.
Handle of pot cover
Glass pot cover
Seal washer
Fastening screw
Pot assembly
Power line
4 5

2. Indicator wires are discon-
nected
1. Disconnect power before cleaning and unplugging the power plug.
2. After the pot is fully cooled, empty food, water or oil in the pot to avoid scalding. In order
to ensure the food is fresh, clean oil should be used for each frying and boiling.
3. After the pot fully cools dowm, a clean cloth can be used to clean the pot body; do not
use a steel wool and other rough objects to clean the pot body. If it would be stored for a
long time, it should be cleaned with a detergent.
4.Do not immerse the entire product in water to avoid the risk of electric shock or malfunc-
tion.
5. After the pot is cleaned, it should be stored at a dry place after it is dried.
6. Any other servicing should be performed by an authorized service representative .
Model:AMR50-220 Rated voltage:120V~ Rated frequency:60Hz Rated frequency:1360W
Chapter 4 Care and Maintenance
Chapter 5 Safety Indicators of Product
Chapter 6 Failure Analysis and Troubleshooting
Electrical Schematic Diagram
Fault phenomenon Causes Solutions
ng indicator is
off
Pot body is
not hot
Pot body is
hot
1. Power line is not connect-
ed Check the plug socket and
the power line lead are
intact, and plug it in place.
Send to the designated
after-sales service depart-
ment for maintenance.
Send to the designated
after-sales service depart-
ment for maintenance.
Thermostat is damaged
Fuse is damaged
Thermostat is damaged
Heating indicator is always
on
Automatic temperature limit
is not available
2. Internal wires are discon-
nected
1. Indicators are damaged
Temperature regulator
Temperature controller
Fuse protector
Indicator
Heating unit
7
6