Tider Sign M Series User manual

Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Mini LED controller
M series mini LED controller reflected LTECH 12 years’ powerful independent R&D ability in LED field, Its
volume is only 1/3 of the conventional controller, but can implement features such as dimming, RGB and color
temperature control. Its high cost performance and creative design, allowing users to enjoy the benefits and
convenience.
Wall-mounted
warranty
5 years

E-mail: [email protected]
tidersign.com
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Receiver:
Compatible Remote: M1/M2/M3/M5/M6/M7
Power Input: DC12V~DC24V
Max Current Load: Max 3Ax3CH
Max Output Power: 108W(12V)/216W(24V)
Gray Scale Level: Max 4096×4096×4096
Working Temp.: -30°C~55°C
Dimensions: L135×W30×H20(mm)
Weight(N.W.): 47g
RF remote is fashionable, slim, light and easy to carry while receiver is small, exquisite and easy to install.
RF remote with low power consumption, long distance, strong obstructions penetrating ability, independent ID
interference-free and other properties.
4096/road grey scale (most of them is 256 in the market), high grayscale performance is more outstanding, the
light is more gentle, dynamic changing modes become more rich and colorful.
One receiver compatible with six different functions of the remote, that is use one receiver can experience
dimming, color temperature and RGB control.
RF remote is simple and intuitive to use, a variety of actions at a glance, what you see is what you get.
Automatic sleep mode, when the touch remote unattended operation over 30s, it can automatically enter
standby mode to extend battery life.
Remote:
Working Voltage: 3V (battery CR2032)
Working Frequency: 433.92MHz
Remote Distance: 40m~50m
Working Temp.: -20°C~55°C
Dimensions: L104×W58×H9(mm)
Weight(N.W.): 42g
Feature:

E-mail: [email protected]
tidersign.com
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
The Learning ID Method of Remote Control:
Operating Instruction for Receiver:
Remote control has been matched to the receiver before leave factory, if deleted accidentally, you can learn
ID as follow.
Learning ID: Short press ID learning button on the receiver, the running light is on, then press any key on the
remote control, the running light flashes several times, activated.
Cancel ID: Long press ID learning button on the receiver for 5 seconds.
Attn: one receiver can be matched with max 10 same or different kinds remote.
Product Size:
20mm
135mm
128mm
30mm
60mm 9mm
104mm
Receiver RF remote Remote holder
Power input socket
Remote ID learning
button
Indicator light
LED lamp connecon socket
W W W + Dimming,M1
NW WW CW V+ Color temperature, remote M2 M5
R G B V+ RGB control, remote M3 M6 M7
V remote

E-mail: [email protected]
tidersign.com
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Operating Instruction for Remote Control :
M1/M2/M3/M5 sleep mode: when the touch remote unattended operation over 30s, it can automatically
enter standby mode to extend battery life. press any of these four keys to
continue.
RGB
ON/OFF
Loop Play
Color
Shortcut Key
Mode
Shortcut Key Speed+/Speed-
Brightness+/-
ON/OFF
Mode Key
Speed/Brightness+ Speed/Brightness-
Touch
Color Circle
CW-NW-WW CT
ON/OFF
Speed/Brightness+
Mode Key
Speed/Brightness-
Touch
Color Circle
NW-WW CT
ON/OFF
Speed/Brightness+
Mode Key
Speed/Brightness-
Touch
Color Circle
RGB
ON/OFF
Delay Off
Touch
Color Circle
Scene-mode I Scene-mode
II
Dimming
(Press 2S and save) (Press 2S and save)
ON/OFF
Color
Shortcut Key
Mode
Shortcut Key
RGB Brightness +/-
Speed/ +
Speed/Brightness-
Brightness
Loop Play
Color-save Key
(Press 2S and save)
RGB
Tables of Changing Mode:
5. Static Purple
6. Static Cyan
7. Static White
8. RGB Skipping
9. 7 Colors Skipping
10. RGB Color Smooth
11. Full-color Smooth
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
NW( neutral white)
-WW(warm white)
smooth
(Change the modes
in sequence) Switch among 3 kinds
CT smooth in
sequence,
NW-WW smooth,
NW-CW smooth,
CW-WW smooth.

E-mail: [email protected]
tidersign.com
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Dimming
Wiring Diagram:
M3-3A
Single LED Strip
Single LED Strip
Single LED Strip
Single LED Strip
Figure A
Figure B
+
DC12V
-
+
DC12V
-
++
DC12VDC12V
--
Power
Adapter
Power
Adapter
M3-3A
++
DC12VDC12V
--
++
DC12VDC12V
--
++
DC12VDC12V
--

Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Color temperature( neutral white-warm white)
Color temperature( cold white-neutral white-warm white)
RGB control
M3-3A
M3-3A
M3-3A
W
V
12V
W
V
12V
W
V
12V
W
V
12V
12V+
WW
NW
12V+
CW
WW
NW
G
R
B
G
R
B
12V+
L1
CW
WW
NW
12V+
WW
NW
Power
Adapter
Power
Adapter
Power
Adapter
White/Warm white
LED strip
Cold white/white/Warm white
LED strip
RGB strip

The product shall be installed and serviced by a qualified person.
This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is
mounted in a water proof enclosure.
Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector.
Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED
lights.
If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Attention:
We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and
covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
Warranty Agreement:

E-mail: [email protected]
tidersign.com
Spectrumlaan 47-49
2665NM Bleiswijk The Netherlands.
E-mail: [email protected]
tidersign.com
Tel: [phone]
Fax: [phone]
TIDER NGIS TIDER, YOUR BEST SUPPLIER...
Repair or replacement as provided under this warranty is the exclusive remedy to the customer. LTECH shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
This manual only applies to this model. LTECH reserves the right to make changes without prior notice.