Time Living manhattan User manual

Assembly Instructions
Hardware List
Parts List
1. M8 x 30mm JCBB Screw 8pcs
2. M6 x 20 JCBC Screw 8pcs
3. End slat caps 26pcs
4. Centre slat caps 13pcs
5. M4 Allen Key 1pc
6. M5 Allen Key 1pc
A. Headboard 1pc
B. Footboard 1pc
C. Side rails 2pcs
D. Centre Rail 1pc
E. Centre Support legs 2pcs
F. Slats 26pcs
G. Corner Feet 4pcs
Note: Please ensure that all hardware is kept
out of the reach of children.
Note: Please use the above check list to
ensure all hardware is included.
Step 1
1.1 Attach the corner feet to the headboard (A) &
footboard (B) with the M6 x 20mm screws. Note:
There are four holes on each corner foot;
however, you will only require two of them.
Do not over-tighten the screws as this may
cause damage to the thread.

Step 2
2.1. Attach the side rails (C) to the headboard (A)
& footboard (B) with M8 x 30mm screws (1).
Note: Do not fully tighten the screws before
assembly is complete. Once completed do
not over-tighten the screws as this may cause
damage to the thread.
Step 3
3.1 Attach the centre support legs (E)
to the centre rail (D) by screwing them
into their corresponding holes. Note: If
the bed is dragged or moved the
centre support legs may no longer
be vertically aligned. You must
ensure that in the event of the bed
moving the legs are checked to
ensure they are aligned. If not this
may cause the centre support bar to
collapse.
3.2 Place the centre rail (D) into its
corresponding brackets on the
headboard (A) and Footboard (B).

Step 4
4.1 Insert the slats (F) into the end slat
cap (3) and fix it to the corresponding
holes on the side rail (C).
4.2 Slot the first slat (F) into the centre
cap (4) and insert a second slat (F) into
the centre cap (4) on the opposite side.
Attach an end slat cap (3) to the second
slat before pressing the caps into the
corresponding holes on the centre rail
(D) and side rail (C).
Step 5
5.1. Your new Manhattan bed frame is
now complete. Once you have
positioned the bed please ensure that
the centre support legs are vertically
aligned before the mattress is placed on
the bed frame.
5.2. To ensure your bed frame remains
in optimum condition please
periodically check all screws and
tighten if necessary.
Any questions? Call our friendly customer service team on [phone]
(Open from 9am-5pm Mon-Fri).