TIME2TECHNOLOGY Noah User manual

Remote Control User Guide v1.2
The lightweight and compact remote control is designed to fit easily
onto a keychain or in a purse or pocket. It can be used to arm or
disarm the Noah home alarm system, change it to Home mode or
even sound the SOS emergency alarm.
Features
Specification:
Power supply: DC 3V (1pc CR2032 button cell battery)
Transmitting: <6mA
Transmitting distance: <80m (in open area)
Transmitting frequency: 315MHz/433MHz
Housing material: ABS plastic
Working temperature: -10°C - 55°C
Humidity: Up to 80% (non-condensing)
Dimension (L/W/H): 35 x 70 x 12 mm
LED flashing: Transmitting
signal to alarm system
Low LED light: Low battery,
replace immediately

Functionality
Arm
Arm Noah when leaving your home. The LED indicator
flashes once. All sensors will be activated. Any sensors
that are triggered will immediately sound the alarm
Disarm
Disarm Noah when entering your home. The LED
indicator flashes once and all sensors will be
deactivated allowing you to move freely in your home
Home Mode
Press the Home button to activate Home Mode.
The LED indicator flashes once. Sensors that are
designated in the Home Zone are deactivated,
allowing you to move freely in your home. The
sensors in Normal Zone will remain active and if
triggered, will immediately sound the alarm.
Emergency Call
Press the SOS button in the event of an emergency.
This will trigger an immediate alarm even if Noah is
disarmed or in Home Mode.

Pairing additional remote controls to the Noah Hub
1. Open the Clan at Home app on your smartphone or tablet
2. Press Noah Alarm System
3. Press the icon to enter the accessories menu
4. Press Remote Control
6. Finally, press the unlock button on the remote
control.
The Noah hub LED will flash green once and make
a beep sound when it has paired successfully
The Keypad will appear under “Remote Controls” in the Accessories
menu
5. Press the (+Add) icon.
The Noah hub LED will turn
purple when it is ready for
pairing.