Engineered in Germany
www.timebach.com
Manufacturer
:
OFFENHEIMERTEC GmbH
Address: Westendstrasse 28,
D-60325 Fr ankfurt am Main,
Germany
Made in: Poland
1. DESCRIPTION
G4 is a reliable 2-hour Countdown timer for Flush mount
installation in Rect box. The Countdown timer enables you to
easly control power for the connected devices & appliances.
2. SPECIFICATIONS
•
Mechanism Brand: TIMEBACH
•
Mechanism Approvals:
• Supply voltage: 220–240VAC 50Hz
• Max Load: 16AX (3A)
•
Operating temperature: 0°C to 45°C
• Product dimensions: - Length 11.15 cm
- Width 8 cm
- Height 1.8 cm
• Installation data: Suitable for Rect box.
• Installation cables (cross section):
0.5mm² -2.5mm²
• Operating Data: -
ON
-
OFF (0)
-
Countdown (120min Max)
• Minimum Countdown: 15 minute.
3. PRODUCT SAFETY INFORMATION
Warning
Prior to use, please examine and verify that the product
is not defective. Please do not use or operate if there is
a defect of any kind.
m
Engineered in Germany
www.timebach.com
Rect - G4
Countdown timer
Countdown
120 minute max
15 minute minimum
5. OPERATION MODE
ON
OFF
4.3 Connect wiring in accordance with wiring diagram.
Do not combine solid and flexible conductors at the
same terminal. When connecting flexible
conductors conductors, use terminal ends.
4.4 Fix backplate to socket box.
4.5 Fit cover over module and reassemble to backplate.
4.6 Re-fit and tighten two
screws (A)
.
The diagram
shows wiring for
a mains-operated
load.
135
N NL L
Supply
IN
Appliance
OUT
Supply
Appliance
4. INSTALLATION
Warning
Installation of an electrical wiring device should be
done by a professional person only.
4.1 Switch off supply to socket box.
4.2 Unscrew two screws (A) - please see Assembly
diagram - secure timeswitch to backplate, remove
cover, and gently pull module from backplate.
Fig. A
module
screws (A)
screws
cover
screws
cover
Note:
To cancel the Countdown
Turn the knob counter clockwise