TINY LAND Tent2003 User manual

Assembly Instructions TINY LAND
A
B
C
D
1
234
Fabric Cover
Sounder
Connector Tubes

Connector Tubes -6 Pcs Connector Tubes -6 Pcs
Connector Tubes -30 Pcs
Pole A -30 Pcs
Pole B -24 Pcs
@tinylandtoy
@tinylandus
www.tinylandus.com [email protected]
FIRE HAZARD
Keep all flame and heat sources away from tent fabric.
Assembly and usage guidelines:
• Adult assembly required
• Adult supervision required at all times
• Ages 3+
WARNING
CHOKING HAZARD
Small parts can be swallowed and block the airway.
Do not allow children under the age of 3 to use this
product.
Use under adult supervision at all times.

TINY LAND
Assembly Instructions
A
A
1
11
3

x 12
1 2
3
@tinylandtoy
@tinylandus
www.tinylandus.com [email protected]
Use connector tube #1 to connect two
poles A together, a total of 12 groups.
Follow the picture to connect poles
assembled in step 1via connector # .
Repeat step 2to set the frame bottom in the picture. Please note that the empty side of
connector tube #3 should face upwards vertical.
1
3
3
A

TINY LAND
Assembly Instructions

1
B
B
A
1
x 6
4 5
@tinylandtoy
@tinylandus
www.tinylandus.com [email protected]
Use two connectors to connect 2 Poles
t to 1 Pole A as shown, a total of 6
groups.
Follow the picture to connect connector
#2 with poles assembled in step 1.
7
Follow the picture to vertically insert the
poles assembled in step 5on the frame
bottom.
1
2
BA
2
x 6
6
Follow the picture to connect poles
assembled in step 4with the longest end
of connector # .
2

TINY LAND
Assembly Instructions
1
B
B

x 6
8 9
10 11
@tinylandtoy
@tinylandus
www.tinylandus.com [email protected]
Use connector tube #1 to connect two
poles together, a total of 6 groups. Follow the picture to set the frame top by
using the pole assembled in step 8.
1
B
4

TINY LAND
Assembly Instructions
C
E

12 13
14
@tinylandtoy
@tinylandus
www.tinylandus.com [email protected]
Follow the picture to fix the fabric cover
on the frame.
Wrap the bottom edge of the tent with Velcro
as shown to secure the tent and frame.
As shown in the picture, the assembly is now complete.
1: Remove the insulating sheet on the back.
2: Put the sounder in the small pocket at the bottom of the tent.
C