TIP TEMPerature Products EasyLog 21CFR User manual

EasyLog 21CFR
Quick Start Guide

DOWNLOAD & INSTALL EasyLog 21CFR SOFTWARE FIRST TIME SETUP
1Administrator Setup
Windows 7, 8 & 10 (32 & 64bit) .Double click on the EasyLog 21CFR icon on your desktop.
.You will need to create an Administrator for the software by lling in the
required information in the setup wizard. Make sure you keep a note of
your login details!
Visit www.tiptemp.com and click on the download link within your
item's product page.
Double click on the downloaded EasyLog 21CFR Installer.exe le, and
follow the on screen prompts.
To see how EasyLog 21CFR Software meets the regulations,
view the checklist at www.tiptemp.com
EasyLog 21CFR is the soware plaorm for Lascar’s 21 CFR compliant
range of data loggers
EasyLog 21CFR Windows Control Soware

2Email Settings 3Software Settings
.You may need to ask your IT support or email service provider for the
required details. More information can be found in the software’s helple.
If you aren’t sure of the details, you can skip this step and come back
to it later.
.These are global settings that apply to all users of the software, some of
which are required as part of the 21CFR standard.
For a full product data sheet for your data logger, or for more information on the rest of the EasyLog range visit
www.tiptemp.com

REPLACING YOUR DATA LOGGER’S BATTERY
3 4
1 2
Your data logger is provided with a 3.6V 1/2AA battery already installed. You
can change the battery by following the instructions below.
Replacement batteries are available from www.tiptemp.com.
4Create Additional Users
.Additional users can then be set up from the Admin menu if required. New
users will be asked to create a password when they rst log in.
You are now ready to start data logging with EasyLog 21CFR
For more information on how to use EasyLog 21CFR, please see the help
le in the software. This can be found by clicking ‘Help’ > ‘Help Topics’.

STARTING YOUR DATA LOGGER
If you would like advice on how
best to use the data logger for
a particular application, please
contact your nearest Lascar
representative.
Name your logger and select the
logging rate.
Select how the LCD should function,
and what happens when your logger
is full.
Set high and low alarms if required.
Set restrictions for stopping the
logging session.
Select when you would like the
logging session to start.
Your logger is now ready for use.
Remove from the USB port.
Click on the ‘Set up and start the
USB data logger’ button.

IMPORTANT SAFETY INFORMATION
NEED HELP WITH YOUR DATA LOGGER?
Contact us any time:
TIP TEMPerature Products
340 W Borad Street
Burlington, NJ 08016
1-800-TIP-TEMP
[email protected]
Issue 2_07--16
Disposal and Recycling Information
You must dispose of Lascar products in accordance with relevant laws and regulations. They contain electronic components and
lithium batteries and therefore must be disposed of separately from household waste.
Repairing or Modifying
Never attempt to repair or modify Lascar products. Dismantling them, other than for the purpose of changing replaceable batteries,
may cause damage that is not covered under the warranty. Servicing should only be provided by an authorized supplier.