Tipro BeFREE 10 User manual

*operating ambient temperature range is 0°C to 40°C
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
WARNING:
connect the power supply
guide the cables
through the cable canal
provide sufficient
airflow around the
power supply *
press the ON button
First install operating system.
Use external storage device.
then install drivers for BeFREE15 module
calibrate the touch screen
the installation should start automaticlly
2
1
34
with
BeFREE 10
Getting Started
P/N 42952/1.0

optionally run ChangeMe to
change settings for each Tipro module
your configuration will be
automaticly detected
install ChangeMe
change settings for
each component
...or leave it by default
and program it
to the configuration!
when finished,
save the
contents to a file
click on the
module
7
5
8
6