tiptap Floating Poster User manual
Keep the packaging box
for the return shipment.
Floating Poster
Assembly Instructions
1
1
Installation Steps
Attach front gasket to the device(a)
and insert it into the signage (b).
Secure the device and signage by
attaching the back gasket (c).
(a) (b)
(c)
2
2
3
Mount the standoff screw base with
a screw of preferred choice.
3Have the signage inbetween two
rubber inserts and fasten the
external screw to hold the signage
on to the wall. Repeat steps 2 and 3
with rest of standoff screws.
Parts List
Once the program has ended, pack the original contents in the box it arrived in and affix the
return shipping label provided to the outside of the box. If you have misplaced the shipping
label please email support@tiptappay.com and we will happily email you a replacement.
Return Shipping
$
Front Gasket Device Back Gasket Signage Standoff Screws
×1×4×1 ×1
Charging Cable
Wall Plug
Complete a full charge
cycle before use.
Battery life is approximately 49 hours.
×1-3 ×1-3 ×1-3
High Capacity Battery
Optional ×1
4Attach the charging cable to the
device (USB-C) and to the wall plug
(USB-A).
Optional Battery: Attach device
(USB-C) to charged battery pack
(USB-A).
Table of contents
