Titan 6000003 User manual

Page 1of 5
TITAN pt. no.: 99 0000 0667
TITAN™ Fuel Tanks
ASSEMBLY ILLUSTRATIONS
F u e l C a d d y
Shown with power cord which is not included (to be wired by local electrician). 12 v. version includes battery bracket
TITAN™ Shop Equipment
100 Gallon Fuel Caddy, 110 volt AC (6000003)
100 Gallon Fuel caddy, 12 volt DC (6000004)
NOTE: For 6000003 110 volt AC Fuel Caddy, a local electrician will be required to
provide and attach power cord due to local regulations.
Assemble the fuel caddy as per the diagrams shown below.

Page 2of 5
Tank Parts
ITEM
NUMBER
PART
QUANTITY
1
Fuel Cap
1
2
3/8 NPT Plug
1
3
Vent Cap
1
4
1/2 NPT Plug
1

Page 3of 5

Page 4of 5
Trolley Assembly
ITEM
NUMBER
PART
QUANTITY
1
5/16"-18 X 1-3/4" Length Cap
Screw
18
2
5/16"-18 X 1-1/2" Length Cap
Screw
4
3
5/16"-18 X 3/4" Length Cap Screw
4
4
5/16" Lock Washer
26
5
5/16" Flanged Locknut
24
6
Trolley Baseplate
1
7
Trolley Handle Support
2

Page 5of 5
8
Trolley Strut
2
9
Rear Mount Support
1
10
Tank Toe Clamp
2
11
Front Mount Support
1
12
Trolley Hanger Bracket
2
13
Trolley Handle
1
14
Tank Side Support
2
15
"TITAN" Rear Stiffener
1
16
Caster Wheel
2
17
Caster Wheel with Brake
2
18
1/2" Flat Washer
4
19
1/2"-13 Thin Nylon Locknut
4
20
Square Tube Insert
2
See instruction documents included with the pump and accessories.
Be sure to return the completed warranty registration for your new Titan™ Fuel Caddy;
or you can register on-line at www.titanfueltanks.com
You will find your caddy tank’s serial number located on the side of the tank.
Write your tank’s Serial Number here:___________________________
A product must be registered within sixty (60) days of receipt for the warranty to be valid.
Warranty is void if product is improperly assembled installed.
For questions or customer service call [phone]
TITAN™
P.O. Box 2225
Idaho Falls, ID 83403 USA
Telephone [phone], FAX [phone]
www.titanfueltanks.com
TITAN Products are PROUDLY MADE IN THE USA
Revised 5.21.15 ©2015 Supertanks, LLC