Titus 655-9152 User manual

Item number
Zinc plated
655-9152 040
30 sets Made of steel and plastic
16
272
34
308
3.47
Accessories
Tacto Slimline Mechanism
Touch Opening
Set of 2 mechanisms (one drawer application):
655-9152-040-K1
PushOpen
Mechanism
2 pcs
Chipboard
screws
4 pcs
Mounting
instructions
1 pc/set
Push
Technical details

1
2
"click"
"click"
1
2
1
2
+ -
3.48
Drawer Systems
· Fast and intuitive mounting
without pre-drilling
· Reliable and secure closing
· Non handed design
· Narrow 1.5mm operating gap
for evenly aligned fronts
Mounting details
Depth adjustment
Position both Tacto mechanisms
on the bottom of drawer
Place the drawer horizontally on the runners
and push towards the cabinet until you hear
the drawer is locked
Push to fully close
Allign Tacto mechanisms with drawer
lip and push to the front panel
Screw-on both mechanisms
Depth
adjustment
-0.5/+2.5mm
i
Works only with Tacto Slimline
>see page 3.47

1
1
1
2
2
2
3.49
Black
Item number
Marking jig for Tekform Slimline
drawer DW70 655-8016 >390
1 set Made of plastic and steel
Marking jig for Tekform Slimline
drawer DW100 655-8017 >390
1 set Made of plastic and steel
Marking jig for Tekform Slimline
drawer DW145 and DW182 655-8018 >390
1 set Made of plastic and steel
Accessories
Marking Jig

18
3.50
Drawer Systems
External cabinet width
Cabinet side
Thickness=18mm
Antracite grey
Item number
Steel back panel DW70 600 655-7L60 >185
800 655-7L80 >185
10 pcs Made of steel
Steel back panel DW145 600 655-7M60 >185
800 655-7M80 >185
10 pcs Made of steel
Steel back panel DW182 600 655-7H60 >185
800 655-7H80 >185
10 pcs Made of steel
Steel Back Panel
Mounting >see page 3.47
Mounting >see page 3.47
Mounting >see page 3.47
18

192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
3.51
Assembly Instructions
Insert the rear connector
vertically (3) and push it
downwards into recess in
the drawer side (4)
Connect the drawer sides to the bottom
panel (1) and fix it with screws (2)
1
3
2
4
6
Insert the back panel (5)
and fix it with screws (6)
5
Chipboard screw
Ø3.5 x 15
Chipboard screw
Ø3.5 x 15
Screws are not included
Assembly Sequence

192
192
192
192
224
192
224
90º
3.52
Drawer Systems
Screws are not included
Insert the front connectors
into holes on the front panel
Front connector
90º turn
Turn the screws 90º
into locked position
Screw-in fixing
Front panel
EasyFix
Use Ø3 x 15mm screws for fixing
Front panel
Front connector
Chipboard screw
Ø3.5 x 15
Screws are not included
Insertion of Front Connectors

Mounting
Attach the front panel to the drawer and
press to click
Removal
Turn the screw towards
the front panel
Front Panel Mounting / Removal
Assembly Instructions
3.53

Removal
Press-up the button under the drawer.
Keep pressed to pull the drawer out
Insertion
Place the drawer horizontally
on the runners and push
towards the cabinet until
you hear the drawer is locked
Push to fully close
Press-up
Drawer Insertion / Removal
3.54
Drawer Systems

1.
3.
2.
4.
3.55
Assembly Sequence
192
192
192
192
224
192
224
192
192
192
192
224
192
224
Fix the bottom
panels with screws (3)
Fix the steel back
panel with screws (4)
Insert the steel back
panel vertically and
push it downwards
into recess in the
drawer sides (1)
Slide the bottom panel
horizontally into recess
at the bottom of
drawer sides (2)
Chipboard screw
Ø3.5 x 15
Screws are not included
Accessories Mounting
Steel Back Panel

3.56
Drawer Systems
Slimline DW70
Slimline DW145 and DW182
with bar
Slimline DW70, DW145 and
DW182 with glass
Assembly of Inner Drawer Front
Chipboard screw
Ø3.5 x 15
Screws are not included Inner Drawer Front