Tivoli Audio TWO+ User manual

OWNER’S MANUAL
DAB/DAB+/DMB/FM HI-FI SYSTEM
ALARM 1
ALARM 2
SOURCE
–TUNE +
CLOCK
SLEEP
4 5 6 AUDIO
POWER
1 2 3
®

DAB/DAB+/DMB/FM HI-FI SYSTEM
English..........................................................................................4
Dansk .........................................................................................17
Deutsch ......................................................................................30
Français......................................................................................43
Italiano........................................................................................57
Nederlands .................................................................................71
Norsk..........................................................................................85

4 – ENGLISH
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
6. Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
7. WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. The remote control sup-
plied with this product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new
and used batteries away from children. If the battery compartment does not close securely,
stop using the product and keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical attention.
8. WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
9. Clean only with a dry cloth.
10. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
12. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
13. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
14. Only use attachments/accessories specified by the manufacturer.

5 – ENGLISH
15. Use only with the cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
16. Operate this product only from the type of power source indicated on the rear
panel. For products using an external power supply, use an exact replacement
if lost or damaged. For products operating from battery power, refer to the user
manual.
17. Unplug this apparatus during lightning storms or when unused for long periods of time.
18. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to water or rain.
d. If the product does not operate normally by following the operating instructions.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinctive change in performance.
19. When replacement parts are required, be sure your service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20. Upon completion of any service, ask the service technician to perform safety checks to confirm
the product is in proper operating condition.
21. If the LCD becomes cracked and damaged, do not touch the liquid.
22. Keep this product a safe distance away from naked flame, such as a lit candle.
23. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
24. The recommended operating temperature range is 5˚ C to 40˚ C (41˚ F to 104˚ F).
25. WARNING – The mains are not disconnected in the off position, but the circuits are
de-powered.
26. The power cord plug serves as the disconnect device and should remain readily accessible.
This product can be recycled. Products bearing this symbol must NOT be thrown
away with normal household waste. At the end of the product’s life, take it to a
collection point designated for recycling of electrical and electronic devices. Find
out more about return and collection points through your local authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive was
implemented to dramatically reduce the amount of waste going to landfills, there
by reducing the environmental impact on the planet and on human health. Please
act responsibly by recycling used products. If this product is still usable, consider
giving it away or selling it.

6 – ENGLISH
Music System Two+Instructions
Congratulations on your purchase of the Tivoli Audio Music System Two+. We believe this to be
one of the finest-sounding stereo DAB Hi-Fi Systems on the market today. With Bluetooth wireless
technology on board, you can stream music to your Music System Two+.
In order to take full advantage of what your new radio is capable of, please take a moment to read
this Owner’s Manual and Safety Instructions. If you have any questions, please do not hesitate to
contact your dealer or Tivoli Audio.
Please save the carton and original packing should you ever need to ship your radio, as
shipping damage is not covered by the factory warranty.
On behalf of all of us, thank you for choosing Tivoli Audio and enjoy your new Music System Two+!
About Tivoli Audio
Tivoli Audio was founded by Tom DeVesto with the mission of bringing simple to use, elegantly
designed, high quality audio products to consumers. As CEO and head of research and development
at his former company, Cambridge SoundWorks*, Tom was responsible for the development of many
of the best selling home entertainment and multi-media products on the market. He also held senior
management positions in product development at both Advent and Kloss Video.
*Cambridge SoundWorks is a registered trademark of Creative Labs, Singapore.
Packed with your Music System Two+ you should find:
• 1 (2.7 m) Power Cord
• 1 Remote Control (Battery installed)
• 2 “AA” Batteries
Please contact your dealer/distributor or Tivoli Audio if any of these items are missing.
Getting Started
• Insert the two “AA” back-up batteries before inserting the power cord.
• Connect the power cord to the input in the rear of the Music System Two+ and then plug the
cord into an outlet.
• Press the Red Power Button on the front panel to turn the Music System Two+ on.
• Fully extend the rear telescoping antenna and be sure the rear antenna switch is in “External”
position.
• When powered on for the first time in DAB mode, the Music System Two+ will initiate an auto
scan. When complete, the display will indicate how many stations were received. Be sure the
rear antenna is fully extended during the auto scan and the antenna switch is in the “External”
position.
• Adjust the volume to the desired level using the front rotary knob.

7 – ENGLISH
Guide To Features (Front Panel)
1. POWER: Push to power the Music System Two+ On or Off (Standby).
2. VOLUME/MENU/TREBLE: Rotate clockwise to increase the volume or counter-clockwise to
decrease the volume. The volume level is represented in numbers from 0 (no output) to 30
(maximum output). If the volume ever sounds distorted, reduce the level immediately. In DAB
and FM modes, push and hold the knob to access the menu. See the sections marked “DAB
Menu” and “FM Menu”. Push briefly and rotate counter-clockwise to reduce the treble or
clockwise to increase the treble. Press the volume knob in to set or the setting will store auto-
matically and the display will return to its previous state. This knob is also used to adjust and
enter selections (by pushing the knob in) when setting the Clock and Alarms. Adjusting the
volume during Snooze will cancel the Snooze mode.
3. ALARM 1/ALARM 2: Briefly press and hold Alarm 1 or 2. A beep will confirm you are in the alarm
set-up mode and the corresponding green LED will illuminate. Rotate and press the Volume knob
in to adjust and set the hour (Figure 1) and minutes (Figure 2) and press in to set and move to the
next setting. Note, adjusting the hour does not affect the minutes and vise-versa. Set the alarm
source (Figure 3 and 4) and alarm volume (Figure 5) in the same manner. If you want the alarm to
wake to a particular station, you must press and hold the alarm button while in DAB or FM mode
to be able to set the alarm to wake to a specific station. Setting the alarm to wake to DAB or FM
when the unit is in AUX/BT mode or in standby will not allow setting a specific station. Setting the
alarm source to “AUX” will cause the alarm to wake to a tone. Bluetooth cannot be selected as an
alarm source. When the alarm LED is off, press the Alarm button once to set the alarm. The display
will show the time the alarm is set to wake. When the alarm LED is on, press the Alarm button
briefly to turn it off. If the alarm is set and power is lost, the alarm will still sound (the tone will sound
in place of radio) at the designated time provided fresh batteries are correctly installed in the rear
battery compartment. When the alarm activates (Alarm LED flashes) you may either turn the unit
off and keep the alarm set for the next day, press the Snooze button to temporarily mute the alarm
for 7 minutes, or briefly press the Alarm button to cancel activation, turning the unit off, and keeping
the alarm set to wake the next day. Adjusting the volume during Snooze will cancel Snooze mode.
ALARM 1
ALARM 2
SOURCE
–TUNE +
CLOCK
SLEEP
4 5 6 AUDIO
POWER
1 2 3
2
5
3
16711 4
910
12
13
8

8 – ENGLISH
4. CLOCK: Press and hold to set. A beep will confirm you are in the clock set mode. Use the
volume knob to select the hour (Figure 6) and then press the volume knob in to set and cycle to
the minutes (Figure 7). Adjusting the hour does not affect the minutes and vise-versa. Repeat
this process to set the year, month and the day (Figure 8, 9 and 10). Once set, press the Clock
button briefly to recall the date and time whenever DAB, RDS or Bluetooth mode is displayed.
When the date is shown, only the month and day will show (not the year).
5. PRESETS 1–6: Press and hold to memorize the tuned station to that particular preset. A beep
will sound confirming the station has been successfully stored. Press briefly to recall the sta-
tion associated with that preset. There are 6 DAB presets and 6 FM presets. If a Preset button
is pressed but no station has been set, the display will show “Preset Empty” for 2 seconds. A
station’s preset number will only show on the display when the Preset button is pressed. The
same station cannot be saved to more than 1 preset.
6. SOURCE: Briefly press to cycle through the sources: DAB, FM, Auxiliary and Bluetooth. The source
can’t be changed while the alarm is sounding.
7. BLUETOOTH:Press to activate Bluetooth wireless technology and follow the steps outlined
under the “Bluetooth Operation” section.
8. SLEEP: With the Music System Two+ playing DAB, FM, Bluetooth or an auxiliary device, briefly
press to begin the 20 minute Sleep timer. The corresponding green LED will illuminate while the
Sleep timer is active and the display will countdown the remaining Sleep time. The Music System
Two+ will power off automatically at the end of the Sleep cycle. Note DAB and RDS text will not
be displayed in Sleep mode.
9. TUNE +/– : In DAB mode, use these buttons to show all available DAB/DAB+ stations. Use
the +/- buttons to highlight specific stations and the highlighted DAB station will tune automati-
cally after 3 seconds, or press the Enter button on the remote control.
FM: Press the Tune +/- buttons briefly to Auto Scan to the next station detected. See “Scan
Setting” under “FM Menu” on how to disable Auto Scan and tune stations manually.
10. AUDIO: Push briefly to cycle through Stereo, SpacePhase
™
Wide mode, or Mono audio settings.
The SpacePhase™Wide mode setting is designed to create a more expansive soundstage,
while the Mono setting reduces multiplex noise on weak FM stations, making otherwise
Fig 6, 7, 8, 9, 10
Fig 1, 2, 3, 4, 5

9 – ENGLISH
unlistenable stations listenable. Regardless of the previous audio setting, the SpacePhase™
Wide mode will automatically engage each time the Music System Two+ is turned on.
EQ: To temporarily turn the EQ off, press and hold the Audio button. The display will show “EQ
Off” and a confirmation beep will sound. The EQ will engage again automatically the next time
the Music System Two+ is turned on. To keep the EQ off, press and hold the Audio button and
the display will show “EQ Always Off” and a confirmation beep will sound. The EQ will remain
off until “EQ On” is selected. The EQ differs from Audio in that it enhances lower frequencies
primarily at lower volume levels. We suggest the rear Bass level be set to the center detent
position. Should the bass ever sound distorted, immediately lower the bass level and/or volume.
11. SNOOZE/MUTE (Top of Cabinet): When the Alarm activates, press this button to silence the
alarm for 7 minutes. The display will count down the remaining Snooze time. Adjusting the
volume level will cancel the Snooze mode. During normal operation, press this button to mute
the audio. The display will show “Muted”. Press again to restore the audio output or adjust the
volume level.
12. HEADPHONE OUT: Connect a set of headphones (not included) to this variable stereo output
for private listening. Plugging in the headphones will mute the primary speakers. The head-
phone’s volume is adjusted using the front panel volume knob. This stereo output accepts
a 3.5 mm stereo male mini connector. Avoid using headphones at high volume levels to prevent
possible hearing damage.
13. IR SENSOR: Receives signals from the included remote control. Do not obstruct this sensor.
Guide To Features (Rear Panel)
1. ANTENNA SWITCH: Switch between the internal and the external DAB/FM antenna.
2. EXTERNAL ANTENNA: An external telescoping antenna is affixed to this input. Adjust for
best reception. For more, see the section marked “Reception/RDS”.
3. AUX IN: To hear audio from another device such as a TV or MP3 player, connect said device’s
audio output to this stereo input and set the Source button to AUX. Switching to the Auxiliary
position does not turn on the connected device. This stereo input accepts a 3.5 mm stereo male
mini connector. Note you may need to adjust the volume level differently for an auxiliary device
than the level used for radio listening.
4. MIX IN: Connect your computer’s (or other device’s) audio output to this input to hear its audio
mixed in with the tuner or auxiliary device if one is connected. The volume level of this input
must be adjusted at the source. This input accepts a 3.5 mm male stereo mini connector.
ANTE NNA DAB/FM ANTENNA
86 3 4 5 1 2 7

10 – ENGLISH
5. REC OUT: You can record from the Music System Two+ by connecting a cassette deck’s audio
input (or other recording device) to this fixed level stereo output. The primary speakers will not
be muted when using this output. This jack accepts a 3.5 mm stereo male mini connector.
6. BASS LEVEL: Turn this control knob to the right to increase the bass volume level or to the
left to decrease the bass volume level. The subwoofer is designed to subtly augment the lower
bass frequencies, not overpower the sound. Tivoli Audio recommends setting this knob to the
center detent position. If the bass should ever sound distorted, immediately lower the bass
level control and/or the front volume control.
7. POWER INPUT: Connect the supplied power cord to this input and plug the cord into a wall
outlet not controlled by a switch. If the power cord is removed from the unit or unplugged from
the wall outlet, please wait 60 seconds before plugging the cord back into the Music System
Two+.
8. BATTERY COMPARTMENT: Properly install the included “AA” batteries to maintain the clock
and alarm settings during a power outage. Check the batteries annually. The display will show
“No Batteries” if there are no batteries installed or the batteries have no or low power. Dispose
of spent batteries according to your state/country’s regulations. When operating on the battery
back-up power, the Music System Two+’s display and LEDs will not illuminate in order to
conserve power, but if set, the alarm will still sound at the designated time. In such a case, the
tone will sound instead of the radio to further conserve battery power.
Remote Control (Remove clear tab over battery before use)
In addition to duplicating most of the front panel controls, the remote control adds the following
functions:
1. MENU/SELECT: Press and hold to enter the main
menu within each source mode and press briefly to
select items within the menu. Use the Volume pq but-
tons to navigate menu items. For more, see the
sections marked “DAB Menu” and “FM Menu”.
2. DISPLAY: When in DAB mode, briefly press repeatedly
to view audio, signal strength, frequency, signal error,
and bit rate. In FM mode, view audio, signal strength,
PTY (Program Type, if any) and frequency.
Controlling volume via the remote is performed using the
pq arrow buttons, while DAB and FM tuning is controlled
using the Left and Right arrow buttons.
When operating the remote control at close distances the
display might pulse. This is normal and is a direct result of
the remote’s ability to operate at greater distances.
When it comes time to replace the remote control’s battery,
use a 3V Lithium Cell #CR2025, installed with the positive
side facing the bottom side of the remote.
DAB/DAB+/DMB Menu
In DAB Mode, press and hold the volume knob on the Music System Two+, or press and hold the
Menu button on the remote control, to enter the main menu. Rotate the knob and press in to change
the items within the menu or use the Remote pq buttons and Select button.
SELECT
MENU
MUSIC SYSTEM TWO
12

11 – ENGLISH
1. AUTO SCAN: Searches the entire frequency range. If you move the Music System Two+ to
another location, you must perform a new scan so the radio will find stations in the new
location.
2. DRC: Dynamic Range Control allows you to change the sound level of stations to make quiet
passages louder to compensate for a noisy environment, or when listening at a low volume level.
3. AUTO UPDATE: Choose between “Any”, “DAB” (also DMB) or “RDS”. For any of the auto
updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal
provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not
responsible for inaccurate time/date information provided by the auto update signal. To set
the clock manually select “Off” and set the time and date using the “Clock” button.
4. BACKLIGHT: Rotate the tuning knob and press in to select, or press the pq buttons on the
remote to adjust the display’s backlight as desired.
5. FACTORY RESET: Press Select and use the remote pq and Select buttons to confirm (Yes)
or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your
personal settings, such as presets.
DAB Display Messages
Secondary Services: Secondary stations will be indicated by a >> symbol next to the station name.
Secondary services may not be available in your area.
“?”: If this symbol appears next to the station name, it means the station is invalid or inactive.
“Not Available”: Shown when tuning a DAB station with an insufficient signal.
FM Menu
In FM mode, press and hold the volume knob on the Music System Two+, or press and hold the
Menu button on the remote control, to enter the main menu. Rotate the knob and press in to change
the items within the menu, or use the remote’s pq buttons and Select button.
1. SCAN SETTING: Press the Select button and use the +/- and Select buttons to choose
between “Strong Stations only” or “All Stations” when performing an auto scan, or select “Off”.
Selecting “All stations” increases the sensitivity of the scan, possibly resulting in the auto scan
stopping on noise. Selecting “Off” allows manual tuning of all stations using the Tune
+/- buttons.
2. RDS: Select On or Off to turn RDS on or off.
3. FM TUNING STEP: Select 50 or 100 kHz tuning step. 100 kHz is recommended.
4. AUTO UPDATE: Choose between “Any”, “DAB” (also DMB) or “RDS”. For any of the auto
updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal
provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not
responsible for inaccurate time/date information provided by the auto update signal. To set
the clock manually select “Off” and set the time and date using the “Clock” button.
5. BACKLIGHT: Rotate the tuning knob and press in to select, or press the pq buttons on the
remote to adjust the display’s backlight as desired.
6. FACTORY RESET: Press Select and use the remote pq and Select buttons to confirm (Yes)
or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your
personal settings, such as presets.

12 – ENGLISH
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not connected
to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Press the Music System Two+’s front panel power button followed by the Bluetooth button,
or change the source to Bluetooth. This will power on the Bluetooth. Turn the volume up about
¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”.
4. You will hear a ring tone from the Music System Two+ confirming connection and you can
begin playing your music files wirelessly. Adjust the volume level on your device. You should
not have to pair your device again. Depending on your device, you may need to make
multiple attempts at Pairing and/or Connecting to the Music System Two+, but please
give your device adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod touch/iPad
1. Press the Music System Two+’s front panel power button followed by the Bluetooth button,
or change the source to Bluetooth. This will power on the Bluetooth. Turn the volume up about
¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Select “Settings”. (Depending on software version)
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6. Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to
enter a PIN, enter “0000”. “Tivoli Bluetooth will change from “Not Paired” to “Connected”.
7. You will hear a ring tone from the Music System Two+ and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/iPod/
iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check the settings
in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing process.
Depending on your device, you may need to make multiple attempts at Pairing and/or Connect-
ing to the Music System Two+, but please give your device adequate time to Pair or Connect
before repeating the process.
When streaming music, you can press the blue arrow to the right of the next track button >>| on the
iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and Bluetooth.
note:
• The Music System Two+ will remember pairing information for up to 8 devices. Additional devices
can be paired, but the least-recently used device will be replaced by the newly paired device.

13 – ENGLISH
• If the audio drops out or stops during playback, move your device closer to the Music System
Two+, or check to be sure another wireless device is not interfering with the signal.
• When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the radio’s volume
level.
Getting the most from your Music System Two+
1. Treat the Music System Two+ as you would a home stereo system. Although the audio from a
computer or laptop can be connected to the Music System Two+, it’s not intended for near-
field (close-up) listening like “computer speakers”. As with a home stereo system, listening at
a distance will yield the best results.
2. The SpacePhase™Wide mode and EQ settings allow you to tailor the Music System Two+’s
sound to your liking depending on the program material, room size and volume level. We’ve
spent countless hours of critical listening using a variety of material with different settings and
at different volume levels. In general we recommend the treble control be kept in the “0” posi-
tion. At high volume levels, for the most accurate reproduction, we recommend keeping the
EQ off and the Audio setting in Stereo or Mono (not SpacePhase™ Wide) mode.
3. Should you ever experience a problem, remove the batteries and the power cord for 60 sec-
onds, then reinstall the batteries and re-attach the cord. This should restore normal
operation.
Reception/RDS
The internal DAB/FM antenna will provide good reception. The supplied external DAB/FM antenna
will usually provide improved reception. Fully extend the antenna. If a noisy FM station is received,
setting the Audio button to “Mono” may help to clear up some of the multiplex noise.
The Radio Data System (RDS) transmits text information along with audio broadcasts. Program
Service data will be shown in the upper right corner when available. Not all FM stations utilize RDS,
thus text data may not be present with some stations. For stations using RDS, text may not appear
or may appear scrambled if the signal is too weak. Experimenting with the FM antenna position
may improve RDS reception. RDS content is determined by each individual FM station, therefore if
any data is shown incorrectly, this is not a fault of the unit. There are also limitations in terms of the
kinds of characters that can be displayed. Therefore it is not unusual to see a different character or
blank space in cases where the precise character can’t be reproduced. Note RDS text will not be
displayed in Sleep mode.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances,
electric blankets, computers, and other electronic devices can also adversely affect reception or inject
noise. If you experience this, move the Music System Two+ further from the offending device or plug
it into an electrical outlet not shared by another device.
Placement
Place the Music System Two+ on a solid, flat, stable surface strong enough to support its weight.
Placement in a bookcase, cabinet, or close to walls or corners may inflate the bass, creating an
unnatural sound. Do not obstruct the vents on the rear panel, as these are for sound as well as
internal heat ventilation.
The Music System Two+ is shielded and may be placed near or below a TV or computer monitor.

14 – ENGLISH
Cleaning
For your own safety, be sure the Music System Two+ is disconnected from the power outlet during
cleaning. Never use any harsh cleansers or solvents on your radio. Fingerprints may be removed
from the cabinet using the included cloth. The face may be cleaned with a slightly damp cloth only
if necessary.
An important note about the wood cabinet: The variation in color and grain are characteristics of
real wood and contribute to the cabinet’s natural beauty. The veneer for each cabinet is unique.
As a result, the cabinet’s finish may not match other Tivoli Audio products.
Depending on the veneer, you might also notice the wood darken over time with exposure to
light. This is normal.
Limited Warranty
Tivoli Audio manufactures its products to very high standards and we are confident our products will
perform well. Accordingly, we provide a limited warranty on this product against manufacturing
defects in material and workmanship to the original owner. This warranty is non-transferable.
Products purchased in the European Union and Norway have a minimum warranty term of two
years. For countries where minimum warranty terms are determined by statute, the warranty term
is the statutory period required. In all other locations, the warranty term is one year.
This Limited Warranty covers the functionality of the product for its normal, intended use as specified
in this Owner’s Manual. It does not cover a malfunction or damage that has resulted from improper
or unreasonable use or installation, using the charger to charge alkaline batteries, faulty ancillary
equipment, modifications, unauthorized repair, shipping damage or loss, abuse, accidents, use on
improper voltage/current, power surges, lightning or other acts of God, excess moisture, normal
wear and tear, commercial use, or purchase from unauthorized dealers. Proof of purchase as
evidence the unit was purchased from an authorized dealer may be required for warranty service.
Please contact the dealer of purchase or local distributor for warranty service or repair.
Please refrain from opening this product or taking it apart as doing so will void this Limited Warranty.
There are no user serviceable parts inside. Tivoli Audio will not pay for costs incurred due to correction
of reception problems, elimination of externally generated static/noise, loss of time, inconvenience,
loss of use of product, or damage caused by improper use of this product.
In the event the product is returned during the warranty term and is eligible for service under
this Limited Warranty, we will repair or replace any defective parts within a reasonable period
of time and free of charge.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS SUBJECT TO SPECIFIED
CONDITIONS. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH APPLY TO THE PRODUCT
YOU HAVE ACQUIRED. THESE LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME
PLACES DO NOT ALLOW THE EXCLUSION, RESTRICTION, OR MODIFICATION OF CERTAIN
IMPLIED RIGHTS OR THEIR EFFECT. IN THOSE SITUATIONS THIS LIMITED WARRANTY WILL
ONLY APPLY TO THE EXTENT THAT THE APPLICABLE LAW ALLOWS.
The laws of your country may provide you with legal claims against the seller or manufacturer of this
product. This Limited Warranty does not affect those rights.

15 – ENGLISH
The provisions of the Limited Warranty are in lieu of any other warranties or conditions, except
those provided by law. This Limited Warranty does not affect any legal rights provided to you by law
and does not preclude any remedy you may have under law.
In countries where liability limits are not precluded by statute, the maximum liability of Tivoli Audio
shall not exceed the purchase price paid by you for the product. In countries where limitations of
liability are precluded by law, Tivoli Audio shall be liable for no more than the direct damages for
bodily injury, and/or real or personal property arising from the negligence of Tivoli Audio.
Where not prohibited by law, Tivoli Audio shall not be liable for special, incidental, consequential,
or indirect damages. Some places do not allow limitations on the exclusion or limitation of relief,
special, incidental, consequential or indirect damages, or the limitation of liability to specified
amounts, so the above limitations or exclusions may not apply to you.
This Limited Warranty is void if the label bearing the serial number has been removed or defaced.
If you purchased an extended service contract from your dealer and service is required after the
term of this Limited Warranty has expired, please contact your extended service contract provider
to obtain service.
For your convenience, you may register your product for warranty service online at our website
www.tivoliaudio.com. There is no legal obligation for you to provide personal information. However,
such information allows us to maintain a record of the Tivoli Audio products acquired by you and
better understand the purchasers of our products. The information collected will be used for mar-
keting purposes by Tivoli Audio and, where permitted, to contact you in relation to the products
you have acquired or other products which might be of interest to you from Tivoli Audio or other
companies. The information that you provide may be processed in another country.

16 – ENGLISH
Specifications
Model: Tivoli Audio™Music System™ Two+
Type: DAB/DAB+/DMB/FM Hi-Fi System with Bluetooth wireless technology
Drivers: 2 x 7.62 cm (2 x 3") full-range, video shielded
1 x 13.34 cm (1 x 5.25") down-firing woofer, video shielded
Dimensions: 35.88 cm W x 13.34 cm H x 24.13 cm D
(14.125" W x 5.25" H x 9.5" D)
Weight: 5.5 kg (12.18 lb.)
Specifications subject to change without notice. Tivoli Audio reserves the right to make product changes without
notice. Tivoli Audio, the Tivoli Audio logo, Tivoli Audio Music System and Space Phase are trademarks of Tivoli
Audio, LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Tivoli Audio is under license. iPod, iPod touch, iPhone, and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries.

17 – DANSK
Vigtige Sikkerhedsinstrukser
1. Læs disse instrukser.
2. Gem disse instrukser.
3. Lyt til alle advarsler.
4. Følg alle instrukser.
5. FORSIGTIG – Der er eksplosionsfare, hvis batteriet udskiftes forkert. Udskift kun et batteri
med et andet af samme eller tilsvarende type.
6. Advarsel: Undlad at udsætte batterier for stærk varme som f.eks. direkte sol, ild eller
lignende.
7. ADVARSEL: SLUG IKKE BATTERIET – FARE FOR KEMISKE FORBRÆNDINGER. Fjernbetjen-
ingen, der følger med dette produkt, indeholder et mønt-/knapcellebatteri. Hvis mønt-/
knapcellebatteriet sluges, kan det forårsage alvorlige indre forbrændinger på blot 2 timer,
hvilket kan være livsfarligt. Opbevar nye og brugte batterier utilgængeligt for børn. Hvis bat-
terirummet ikke lukker ordentligt, skal du ophøre med at bruge produktet og opbevare det
utilgængeligt for børn. Hvis du har mistanke om, at batteriet kan være blevet slugt eller er
kommet ind et andet sted i kroppen, skal du straks søge læge.
8. ADVARSEL – For at nedsætte risikoen for brand eller elektrisk chok, må dette apparat ikke
udsættes for regn eller fugt.
9. Rengøres kun med en tør klud.
10. Bloker ikke ventilationsåbninger. Installer i overensstemmelse med fabrikantens instrukser.
11. Må ikke installeres nær andre varmekilder så som radiatorer, varmeriste, ovne eller andre
apparater (inklusive forstærkere) som producerer varme.
12. Omgå ikke sikkerhedsformålet med et polariseret eller jordforbindelsesstik. Et polariseret stik
har to blade og det ene blad er bredere end det andet. Et jordforbindelsesstik har to blade og
et tredje jordforbindelsesben. Det brede blad på det tredje ben er der for din sikkerhedsskyld.
Hvis det medførende stik ikke passer ind i din stikkontakt, bedes du kontakte en elektriker for
at udskifte den forældede stikkontakt.
13. Beskyt strømkablet så man ikke kan træde på det eller klemme det især ved stik, stikdåser og
der hvor de er tilsluttet apparatet.

18 – DANSK
14. Brug kun de vedhæftelser/tilbehør som fabrikanten har specificeret.
15. Må kun bruges sammen med det rullebord, den stand, det stativ, det beslag
eller bord som fabrikanten har specificeret, eller som blev solgt sammen med
apparatet. Når man bruger et rullebord skal man være forsigtig, når man flytter
apparatet på rullebordet, så man undgår skade hvis det tipper.
16. Brug kun dette produkt fra den type strømkilde, som er indikeret på bagpanelet. For produkter
som bruger en ekstern strømforsyning skal man erstatte den med en identisk strømforsyning,
hvis den forsvinder eller beskadiges. For produkter som bruger batteristrøm henvises til
brugermanualen.
17. For ekstra beskyttelse skal du trække stikket ud på dette produkt i tordenvejr eller hvis det
efterlades eller ikke bruges i længere tid. Det vil forhindre skade på produktet ved lynnedslag
og overspænding.
18. Træk produktet ud af stikkontakten og kontakt en kvalificeret servicetekniker for service
i følgende tilfælde:
a. Hvis strømkablet eller stikket er beskadiget.
b. Hvis der er spildt væske eller hvis der er kommet noget i produktet.
c. Hvis produktet er blevet udsat for vand eller regn.
d. Hvis produktet ikke fungerer normalt, når man følger brugsanvisningerne.
e. Hvis man har tabt produktet, eller det på nogen måde er blevet beskadiget.
f. Når produktets performance ændrer sig i betydelig grad.
19. Når det er nødvendigt at bruge reservedele, skal du sørge for at serviceteknikeren bruger de
reservedele, som fabrikanten specificerer eller at de har samme karakteristika som den origi-
nale del. Uautoriserede erstatninger kan forårsage brand, elektrisk chok eller andre farer.
20. Når der er blevet udført service, skal du bede serviceteknikeren om at udføre sikkerhedstjek
for at bekræfte at produktet fungerer korrekt.
21. Hvis LCD displayet revner eller bliver beskadiget, må væsken ikke berøres.
22. Hold sikker afstand mellem dette produkt og åben ild så som et tændt stearinlys.
23. Apparatet må ikke udsættes for dryp eller stænk og ting der er fyldt med væske, så som en
vase, må ikke stilles på apparatet.
24. Den anbefalede temperatur for brug er mellem 5 ºC og 40 ºC (41ºF - 104ºF).
25. ADVARSEL – Forsyningsnettet er ikke frasluttet, når det står på “off”, men der er ingen strøm
i kredsløbene.
26. Stikket på strømkablet fungerer som en fraslutningsanordning og skal altid være let
tilgængelig.
Dette produkt kan genbruges. Produkter med dette symbol må IKKE smides
væk sammen med almindeligt husholdningsaffald. Når du vil smide produktet ud,
bedes du tage det til et indsamlingssted for genbrug af elektriske og elektroniske
anordninger. Få mere information om steder for returnering og indsamling hos
din lokale myndighed.
Det europæiske direktiv om affald af elektrisk og elektronisk udstyr (WEEE)
blev implementeret for at stærkt nedsætte mængden af affald som ender på i
lodsepladsen og derved nedsætte den miljømæssige påvirkning på jorden og
på menneskers helbred. Udvis venligst ansvarlighed ved at genbruge brugte
produkter. Hvis dette produkt stadigt kan bruges, bedes du overveje at forære
det væk eller sælge det.

19 – DANSK
Music System Two+ Instruktioner
Tillykke med dit køb af Tivoli Audio Music System Two+. Vi anser dette for at være et af de mest vel-
spillende stereo DAB Hi-Fi systemer på markedet i dag. Med Bluetooth trådløs teknologi indbygget,
kan du streame musik til dit Music System Two+.
For at få fuldt udbytte af dit nye systems muligheder, anbefaler vi at du bruger lidt tid på at læse
denne brugervejledning. Hvis du har nogen spørgsmål, er du velkommen til at kontakte din forhan-
dlere eller Tivoli Audio.
Venligst gem den originale emballage, i tilfælde af, at du skulle få brug for at sende dit system,
da skader opstået under forsendelse ikke er omfattet af garantien.
Vi takker dig for at vælge Tivoli Audio og ønsker dig god fornøjelse med dit nye Music System Two+!
Om Tivoli Audio
Tivoli Audio blev startet af Tom DeVesto som havde en mission om at bringe brugervenlige og elegant
designede audioprodukter af høj kvalitet til forbrugerne. Som administrerende direktør og chef for
forskning og udvikling på hans tidligere arbejdsplads, Cambridge SoundWorks*, var Tom ansvarlig for
at udvikle mange af de home entertainment og multimedie produkter, der sælger bedst på markedet.
Han arbejdede også i topledelsesstillinger indenfor produktudvikling hos både Advent og Kloss Video.
*Cambridge SoundWorks er et registreret varemærke tilhørende Creative Labs, Singapore.
I pakken med dit Music System Two+ finder du:
• 1 stk. 2,7m lysnet ledning
• 1 stk. Fjernbetjening (Batterier er isat)
• 2 stk. Batterier (AA)
Hvis nogle af disse dele mangler, bedes du kontakte din forhandler eller Tivoli Audio.
Kom Godt I Gang
• Isæt de to “AA” batterier, før lysnet-ledningen tilsluttes.
• Tilslut lysnetledningen på bagsiden af Music System Two+ og tilslut derefter ledningen til en
stikkontakt.
• Tryk på den røde tænd/sluk knap for forsiden af Music System Two+ for at tænde systemet.
• Træk teleskopantennen på bagsiden ud i fuld længde og sørg for at antenne kontakten på bag-
siden står på “External”-positionen.
• Første gang systemet tændes i DAB-mode, vil systemet starte en automatisk scanning. Når den
er gennemført vil displayet vise hvor mange stationer det har fundet. Vær sikker på at anten-
nen er udtrukkekt i fuld længde under scanningen og at antenne kontakten på bagsiden står i
“External”-positionen.
• Tilpas lydstyrken til det ønskede niveau med drejeknappen på forsiden.

20 – DANSK
Funktions Guide (Front Panel)
1. POWER (TÆND/SLUK): Tryk for at tænde eller slukke for Music System Two+.
2. VOLUME/MENU/TREBLE: Volumen/DAB menu/diskant: Drej i urets retning for at øge lydstyrken
eller modsat uret for at sænke lydstyrken. Lydstyrke-niveaut vises som et tal mellem 0 (ingen
lyd) til 30 (Maksimal lydstyrke). Hvis lyden nogensinde skulle lyde forvrænget, skru da straks ned
lydstyrken. I DAB og FM-mode, tryk og hold knappen for at aktivere menuen. Se sektionerne
“DAB Menu” og “FM Menu”. Tryk kortvarigt og drej mod uret for at reducere diskanten eller med
uret for at øge diskanten. Tryk volumenknappen ind for at vælge indstillingen eller indstillingen
vil automatisk gemmes og displayet vil vende tilbage til den tidligere tilstand. Denne knap anv-
endes også til at tilpasse og vælge indstillinger (ved at trykke knappen ind) når Ur og Alarm
indstilles. Ændring af lydstyrken under Snooze-mode vil annullere Snooze-mode.
3. ALARM 1/ALARM 2: Tryk og hold kortvarigt Alarm 1 eller 2. Et bip vil bekræfte at du er i Alarm-
indstillings tilstand og det grønne LED lys til tænde. Drej og tryk Volumen-knappen for at indstille
time (Figur 1) og minutter (Figur 2) og tryk ind for at vælge indstilling og gå videre til næste trin.
Bemærk, at ændring af time ikke påvirker minutter og omvendt. Indstil alarm-kilden (Figur 3 og 4)
og alarm lydstyrken (Figur 5) på samme måde. Hvis du ønsker, at alarmen vækker dig til en bestemt
station, tryk og hold alarmknappen i DAB eller FM-mode for at kunne indstille alarmen til at vække
til en bestemt station. Indstilling af alarmen til at vække til DAB eller FM, mens enheden er i Aux/
BT-mode eller på standby, forhindrer indstillingen af en bestemt station. Sættes alarm kilden til
“AUX” vil få alarmen til vække med en tone. Bluetooth kan ikke vælge som alarmkilde. Når alarm
LED lyset er slukket, tryk på alarmknappen én gang for at aktivere alarmen. Displayet vil vise tid-
spunktet alarmen er sat til at vække. Når alarm LED lyset er tændt, trykkes èn gang for at deaktivere
alarmen. I tilfælde af strømafbrydelse, vil alarmen stadig kunne vække (en tone vil vække i stedet
radio) på det indstillede tidspunkt, såfremt friske batterier er korrekt indstalleret. Når alarmen
vækker (Alarm LED lyset blinker) kan du enten slukke systemet og bevare alarmindstillingen til
næste dag, trykke Snooze-knappen for at udsætte alarmen 7 minutter, eller trykke kortvarigt på
Alarm-knappen for at deaktivere alarmen. Justering af lydstyrke under Snooze vil deaktivere
Snooze-mode.
ALARM 1
ALARM 2
SOURCE
–TUNE +
CLOCK
SLEEP
4 5 6 AUDIO
POWER
1 2 3
2
5
3
16711 4
910
12
13
8