TJERNLUND SIDESHOT SS1C INCREASED CAPACITY OIL VENT SYSTEM... User manual

Look Inside — see how the SideShot is changing the
direction of natural draft heating equipment
Factory-wired
controls
Stainless Steel
vent hood
Flue gases
Adjustable
draft control
Twice-cooled
exhaust gases
Secondary outdoor air intake
Primary outdoor
air intake
Multi-deck, insulated plenum
Flue gases
TJERNLUND PRODUCTS, INC.
1601 Ninth Street White Bear Lake, MN 55110-6794
Phone: [phone].255.4208 Fax: [phone]
Visit our web site: www.tjernlund.com
Copyright © 2005 Tjernlund Products, Inc. All rights reserved. P/N 8500005
The trend for today’s larger homes and
higher pump pressures has created the
need for larger capacity Side Wall Vent
Systems. The Tjernlund SideShot Model
SS1C meets that need by handling inputs
up to 315,000 BTU/hr.
The SS1C is the perfect side wall venting
solution for large residences with:
 Multiple section boilers
 Large hot water demands
 Snow melt systems
Get all the advantages of our standard
SS1 with additional venting capacity:
 Zero clearance installation
 Patented high velocity discharge
 Stainless steel termination
Automatically operated by the UC1
Universal Control:
 Adjustable pre/post purge
 Operational and troubleshooting LED's
with fault code memory
 Interlocks with any burner circuit
 Built-in high limit and fan proving switch
Our highest capacity SideShot for oil
burner capacities up to 315,000* BTU/hr.
at vent lengths up to 50’
*Based on 100 psi fuel pump pressure
Model SS1C
AVAILABLE FROM: