TLW VEW K30-2034MZ User manual

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
Kit Contents
▪Dimming Zigbee remote
Important Safety Information
DISCLAIMER: PLEASE NOTE INSTALLATION SHOULD BE CARRIED OUT BY A
QUALIFIED ELECTRICIAN!
•This Zigbee RGB+CCT remote is a wireless transmitter that communicates with a variety of ZigBee
compatible systems. This transmitter sends wireless radio signals that are used to remotely control a
compatible system.
•This Zigbee remote supports 1 group for binding max. 30 lighting devices and enables to control both
RGB and CCT ZigBee lighting devices.
•This device contains a button lithium battery that shall be stored and disposed properly.
•DO NOT expose the device to moisture.
Function Introduction

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
Installation
Zigbee Network Pairing through Coordinator or Hub (Added to a Zigbee Network)

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
TouchLink to a Zigbee Lighting Device
Removed from a Zigbee Network through Coordinator or Hub Interface
Factory Reset Manually
1
From your ZigBee controller or hub interface, choose to delete or reset the remote as instructed,
indicator flashes 3 times quickly to indicate successful removing.

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
Remove a Touchlink Paired ZigBee Lighting Device
Factory Reset a Lighting Device (Touch Reset)
Find and Bind a Zigbee Lighting Device

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
Find and Unbind a Zigbee Lighting Device
Clear All Find and Bind Mode Paired Lighting Devices
Setup a Network & Add Devices to the Network (No Coordinator or Hub Required)

Product Name: Remote Multi Dot Multi-Channel LED Dimming Zigbee Remote
Product Code: K30-2034MZ
How to Check Whether the Remote Belongs to a Network or Not
Battery Power Monitor Function
Other Information
OTA
The remote supports firmware updating through OTA, and will acquire new firmware from zigbee controller
or hub every 10 minutes automatically.
Product Data
1
Short press any button, indicator blinking means the remote has already been added to a network. No
blinking of indicator means the remote does not belong to any network.