TMI Products VD32A User manual

Issued on : 19. 03. 2014
ψ29. 50 mm
H 3.97 mm
Specification - 1
Specification - 2
Appearance
Casing
Hand Fitting
Hand Setting Stem
Dial
Assembly Plan - 1
Assembly Plan - 2
Hands
SII Products
Cal. VD32A
Version 1
Version 1
Version 1
Version 1
Version 1
Version 1
Version 1
Version No.Item
Version 1
Version 1
Version 1

MOVEMENT SPECIFICATION - 1
1. MOVEMENT DIMENSIONS
·
Outside diameter ψ29.50mm (12H~6H) x 26.00mm (3H~9H)
·
Casing diameter ψ28.80mm (12H~6H)
·
Total height 3.97 mm
2. TIME STANDARD
·
Type of quartz oscillator Tuning fork
·
Frequency of quartz oscillator 32,768 Hz
·
Accuracy Monthly rate: Less than 20 seconds per month at
normal temperature range
·
Regulation device Nil
·
Regulation hands unbalance Hour hand : Less than 0.50 µN·m ( 50mg·mm )
Minute hand : Less than 0.60 µN·m ( 60mg·mm )
Second hand : Less than 0.07 µN·m ( 7mg·mm )
Dual time hand : Less than 0.05 µN·m ( 5mg.mm )
24H indicator hand : Less than 0.07 µN·m ( 7mg.mm )
·
The moment of inertia 24H indicator hand
(Disc hand)
·
Additional function Dual time of 24H
24H indicator ( synchronized regular hour-hand )
3. BATTERY
·
Type Silver oxide battery
·
Size ψ9.5 x t 2.0 ( mm )
·
Battery life Approx. 2 years
·
Recommended battery SR920SW ( SEIZAIKEN )
4. STEPPING MOTOR
·
Number of units 2 pieces
·
Type Two pole stepping motor
·
Step 180°every second
5. JEWEL
0 jewel
6. ANTIMAGNETISM
≧1600 A / m ( Will not affected by general household appliance )
( direct current magnetic field )
7. SHOCK RESISTANCE
On equal level with general quartz movement
8. OPERATING TEMPERATURE RANGE
From - 5 ℃to + 50 ℃
9. TEST OF ACCURACY
·
Equipment to be used SEIKO Quartz Tester QT - 99
Greiner Quartz Timer - C
Witschi Q-Tester 4000
·
Duration of measurement 10 seconds
·
Microphone to be used Electromagnetic detection type
10. ATTACHED PARTS
* All specifications are subject to change without notice.
SII Products Version: 1
0351 - 1780 (Normal)
Three Hands with 2 Eyes ( 24H Indicator, Dual Time of 24H )
CAL.VD32A 12 3 / 4 Ligne Quartz Movement
: Less than 0.40 µg·m² ( 400mg·mm² )
3013 - 14G0
0110 - 3400
Parts Name
Hand setting stem
Sticker
Silver oxide battery
Parts Code

Movement Specification - 2
OPERATION
Version 1
SII Products
CAL. VD32A
2 step motors ( 3 hands, dual time of 24 hour )
Dual time of 24H hand
3 hands
First click position
24H hand
Linkage
Free
Dual time correction
-1 hour / PUSH
Dual time correction
+1 hour / PUSH
Normal position
First click position
Dual time zero position reset mode
( AC finished = Reset relieved )
Dual time correction
Counter clockwise
( Keep pushing :
hand moving fast )
Dual time correction
Clockwise
( Keep pushing :
hand moving fast )
Time setting
Reset switch
Second setting device
Dual time correction
Counter clockwise
( Keep pushing :
hand moving fast )
Dual time correction
Clockwise
( Keep pushing :
hand moving fast )
*Hands demonstration while AC reset :
Dual time of 24 hour hand :
Counter clockwise 3 degree,
Clockwise 3 degree.
Time setting
Reset switch
Second setting device
*After the Dual time hand reset to the [0:00] position,
push the crown back to normal position.
AC functions
(Keep buttons
"A" & "B"
pressed at the
same time for
2 seconds,
and then release
the buttons)