Toa VX-3000 SERIES User manual

PLEASE READ THIS MANUAL FIRST!
INTEGRATED VOICE EVACUATION SYSTEM
VX-3000 SERIES
Thank you for purchasing TOA’s Integrated Voice Evacuation System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1134
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
1134-CPR-195
EN 54-16: 2008
Fire Detection and fire alarm systems - part 16: Voice alarm control and
indication system for fire detection and fire alarm systems for buildings
Options:
Manual silencing of voice alarm condition
manual reset of voice alarm condition
voice alarm condition output
indication of a fault related to voice alarm zones
voice alarm manual control
emergency microphones
redundant power amplifiers
16
DOP 16-004
When an EN 54-16 compliant VX-3000 system has to be installed, then carefully read the separate manual
titled "APPENDIX: ADDITIONAL INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT
SYSTEM" and follow up the installation and configuration requirements explained therein. This APPENDIX
contains the basic description of settings and installations, so please refer to the general instruction
sections in this document for more details.

2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................. 3
2. PARTS INCLUDED wITH THE PACkAGE ....................................... 5
3. COMPOSITION OF
THE VX-3000 INSTRUCTION MANUAL ............................................ 5
4. GENERAL DESCRIPTION .......................................................................... 5
5. SYSTEM FEATURES ...................................................................................... 6
6. SYSTEM EXAMPLE ........................................................................................ 6
7. AFFIXING DECLARATION OF COMPLIANCE
(EN 54-16 STANDARD) ................................................................................. 7

3
1. SAFETY PRECAUTIONS
• Beforeinstallationoruse,besuretocarefullyreadalltheinstructionsinthissectionforcorrectand safe
operation.
• Besuretofollowalltheprecautionaryinstructionsinthissection,whichcontainimportantwarningsand/or
cautions regarding safety.
• Afterreading,keepthismanualhandyforfuturereference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual rst and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
resultinmoderateorminorpersonalinjury,and/orpropertydamage.
wARNING
CAUTION
when Installing the Unit
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
asdoingsomayresultinreorelectricshock.
• Since the unit is designed for indoor use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
• (Applicable to VX-3004F, VX-3008F, VX-3016F,
VX-015DA, VX-030DA, VX-050DA, RM-200SF,
RM-300X, and VX-3000DS only)
Use the unit only with the voltage specied on
the unit. Using a voltage higher than that which is
speciedmayresultinreorelectricshock.
• (ApplicabletoVX-3000DSonly)
Do not cut, kink, otherwise damage nor modify
the power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in re or
electric shock.
• (ApplicabletoRM-200SF,RM-300X,RM-320F,and
RM-210F only)
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
downandcausingpersonalinjuryand/orproperty
damage.
• (ApplicabletoRM-200SF,RM-300X,RM-320F,and
RM-210F only)
Install the unit only in a location that can structurally
support the weight of the unit and the mounting
bracket. Doing otherwise may result in the unit
falling down and causing personal injury and/or
property damage.
when the Unit is in Use
• Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further
attempt to operate the unit in this condition as this
maycausereorelectricshock.
· If you detect smoke or a strange smell coming
from the unit
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· (ApplicabletoVX-3000DSonly)
Ifthepowersupplycordisdamaged(exposureof
the core, disconnection, etc.)
· Ifitismalfunctioning(notonesounds)
• Topreventareorelectricshock,neveropennor
remove the unit case as there are high voltage
components inside the unit.
(Applicable to VX-3004F, VX-3008F, VX-3016F,
RM-200SF, RM-300X, and VX-3000DS only)
Referallservicingtoqualiedservicepersonnel.
• Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentallyspillintotheunit,thismaycauseare
or electric shock.
wARNING

4
• (ApplicabletoVX-3004F,VX-3008F,VX-3016F,VX-
015DA, VX-030DA, VX-050DA, VX-3000DS only)
Donotinsertnordropmetallicobjectsorammable
materials in the ventilation slots of the unit’s cover,
asthismayresultinreorelectricshock.
• (ApplicabletoVX-3000DSonly)
Do not touch a power supply plug during thunder
and lightning, as this may result in electric shock.
• Whenreplacingthefuse,besuretousethesupplied
one. Using any other fuse than supplied may cause
reorelectricshock.
VX-015DA: Blade10A
VX-030DA: Blade20A
VX-050DA: Blade30A
VX-3000DS:
ACT8AH,ACT6.3AL,andBlade35A
• (ApplicabletoVX-3000DSonly)
Handleorusethebatteriesproperly.
Doing otherwise may cause leakage or explosion
ofthebatteries,resultingina re,personalinjury,
damage to peripheral equipment, or contamination
of environment.
when Installing the Unit
• (ApplicabletoVX-3000DSonly)
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
• (ApplicabletoVX-3000DSonly)
When unplugging the power supply cord, be sure to
grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power
supplycordmaycauseareorelectricshock.
• (ApplicabletoVX-3004F,VX-3008F,VX-3016F,VX-
015DA, VX-030DA, VX-050DA, and VX-3000DS
only)
Do not block the ventilation slots in the unit’s cover.
Doing so may cause heat to build up inside the unit
andresultinre.
(Applicable to VX-015DA, VX-030DA, and VX-
050DA only)
Also, periodically clean the ventilation slots of dust.
• Avoidinstallingtheunitinhumidordustylocations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke
or steam as doing otherwise may result in re or
electric shock.
• (Applicable to VX-3004F, VX-3008F, VX-3016F,
VX-015DA, VX-030DA, VX-050DA, RM-200SF,
RM-300X, and VX-3000DS only)
Note correct polarity (positive and negative
orientation) when connecting the power supply
cord. Reversed polarity connections will cause
damage to the unit.
• (Applicable to VX-3004F, VX-3008F, VX-3016F,
and VX-3000DS only)
System units (except remote microphones) are
designed exclusively to be mounted in an equipment
rack. Be sure observe the following instructions
when rack-mounting the unit. Failure to do so may
causeareorpersonalinjury.
· Installtheequipmentrackonastable,hardoor.
Fix it with anchor bolts or take other arrangements
to prevent it from falling down.
· Rack-mounting screws are not supplied with the
unit. Prepare them that are appropriate for the
equipment rack
.
· (ApplicabletoVX-3000DSonly)
When connecting the unit’s power cord to an AC
outlet, use the AC outlet with current capacity
allowable to the unit.
• (ApplicabletoVX-3000DSonly)
When connecting multiple appliances to a single
power socket through a multi-outlet power strip, a
total current consumption of the appliances must
not exceed the allowable current capacity of the
power socket.
Failure to observe this instruction may result in a
reorelectricshock.
• (ApplicabletoVX-3000DSonly)
When 2 or more AC power cords are connected to
a multi-outlet power strip, never remove the power
strip from a power source.
when the Unit is in Use
• (Applicable to VX-3004F, VX-3008F, VX-3016F,
VX-015DA, VX-030DA, and VX-050DA only)
Do not operate the unit for an extended period of
time with the sound distorting. Doing so may cause
theconnectedspeakerstoheat,resultinginare.
• (ApplicabletoRM-200SFandRM-300Xonly)
UsethespeciedACadapterfortheunit.Notethat
theuseofotheradaptermaycauseare.
• (Applicable to VX-015DA, VX-030DA, and VX-
050DA only)
Contact your TOA dealer as to the cleaning. If dust is
allowed to accumulate in the unit over a long period
oftime,areordamagetotheunitmayresult.
• (ApplicabletoVX-3000DSonly)
Make sure to observe the following handling
precautions so that a re or personal injury does
not result from leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the battery
intoare.
· Avoid using both new and old batteries together.
CAUTION

5
· Never charge batteries of the type which are not
rechargeable.
· Do not solder a battery directly.
· Besuretousethespeciedtypeofbatteries.
· Note correct polarity (positive and negative
orientation) when connecting a battery to the unit.
· Avoid locations exposed to the direct sunlight,
high temperature and high humidity when storing
batteries.
• (ApplicabletoRM-200SF,RM-300X,RM-320F,and
RM-210F only)
Havetheunitcheckedperiodicallybytheshopfrom
where it was purchased. Failure to do so may result
in corrosion or damage to the unit or its mounting
bracket that could cause the unit to fall, possibly
causing personal injury.
2. PARTS INCLUDED wITH THE PACkAGE
Check to be sure that all the following components are included with the unit.
Accessory VX-3004F VX-3008F VX-3016F
CD(PCsettingsoftware) 111
Removableterminalplug(2pins) 264
Removableterminalplug(4pins) 111
Removableterminalplug(6pins) 222
Removableterminalplug(12pins) 224
Removableterminalplug(17pins) 112
Ferrite cable clamp 222
3. COMPOSITION OF THE VX-3000 INSTRUCTION MANUAL
The VX-3000 system Instruction manual is divided into 4 parts.
Please read the proper manual for your purpose.
For unit installation
For broadcast management and setup
For broadcasting operation
USER'S MANUAL
(PLEASE READ THIS MANUAL FIRST)
Operating instructions
Setting software instructions
Installation manual
This manual
Separate manual (CD)
Separate manual (CD)
Separate manual (CD)
4. GENERAL DESCRIPTION
The TOA VX-3000 Series broadcast system is designed for both general and emergency purpose broadcasts.
ItiscomprisedoftheVoiceEvacuationMainFrame,DigitalPowerAmpliers,PowerSupplyunit,Emergency
PowerSupply,andauser-speciednumberofRemoteMicrophones.
The VX-3000 system allows 3 types of broadcasts to be made: General-purpose broadcast such as general
pagingandBGM,Emergencybroadcastthattheemergencymessagesaretobebroadcastbyanautomatic
announcement device or remote microphone, All-zone emergency broadcast* that is to be made available even
during system malfunctions or failures.
The dedicated software is used to perform all necessary settings related to the entire system operation and
functionsincludingsystemcongurations,input-to-outputsignalrouting,functionassignmenttotheoperation
keys, operation of the control terminals, and selection of the failure detection points.
* Available when an analog link is connected.

6
6. SYSTEM EXAMPLE
VX-015DA/030DA/050DA
VX-3000DS
LAN
VX-3000 System
VX-3000 System
1A
1B
4A
4B
VX-3004F
BGM unit
RM-300X RM-210F RM-200SF RM-320F
5. SYSTEM FEATURES
• VX-3000systemisavoiceevacuationsystem.
• Decentralizedcongurationispossiblevianetwork.
• VX-3000systemisconstructedupto128ABzonesor512zonesassystem.
• SpeakerSelectorfunctionisimplemented,thenVX-3000systemisabletocovermanyzones.
• Ageneralbroadcastforasoundqualityregulatingfunctionispossibletodigitalizeallsound.
• Ageneralbroadcastingispossiblebylatitudesettingofcontrolinput/outputandpriorities.

7
7. AFFIXING DECLARATION OF COMPLIANCE (EN 54-16 STANDARD)
TodeclarethattheVX-3000FcomplieswithEN54-16,afxthestickersuppliedwiththeVX-3000Fvisibleto
thefrontpaneloftheequipment(e.g.attheupperrightsideasshownbelow).
Rack EN 54-16
EN 54-16
Sticker (supplied with the VX-3000F)
Affix only the upper part of the
sticker to the equipment rack.
Paste this sticker on the outside
of the cabinet rack containing
the so certified equipment.
VX-3004F,VX-3008F,andVX-3016Farecollectivelyreferredtoas"VX-3000F."

Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1,Minatojima-Nakamachi,Chuo-ku,Kobe,Hyogo,
Japan
Authorized representative:
TOAElectronicsEuropeGmbH
Suederstrasse282,20537Hamburg,
Germany
URL:http://www.toa.jp/
133-21-00332-01
warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
Other manuals for VX-3000 SERIES
3
Table of contents
Other Toa Speakers manuals