ToggenGear ALPINE 2020 IH User manual

ALPINE 2020 IH
USER MANUAL
We are thrilled you decided to
purchase the ToggenGear Alpine
2020 Induction Heater. An easy to
use, single button heater for your
DynaVap. Thank you for your
support!

QUICK START GUIDE
Press the on/off button to turn on the
device. You will see the battery lights
illuminate, indicating battery level.
Place your DynaVap into the heater on
the top of the unit and press down to
activate. You will see a red ring of light
emit around the heater. This indicates
the heater is on. Continue to hold your
DynaVap down in the heater to keep it
heating. Once you hear the “click”, your
DynaVap is ready for use. Note: If you
do not hold the DynaVap down in the
heater, the device will not heat up.
Use the magnet on the top of the
device to help cool your Dynavap or
store it when not in use.
To turn the device off, press the on/off
button. The battery lights will go off,
indicating the device is no longer on.

CHARGING YOUR
ALPINE 2020 IH
Each light on the device represents
25% battery life. When all four lights are
illuminated the Alpine is completely charged.
To charge the device, use the included charging
cable. Plug it into the back of the device and into a
working outlet.
Once plugged in, you will see the blue light illuminate on
the charging box. It takes about 2 hours for the device to
reach a full charge.

CHARGING YOUR
ALPINE 2020 IH
If the Alpine is off, you will not see any lights on the
device illuminate when the unit is charging.
If the Alpine is on, the battery lights will be illuminated
and each light will light up as the unit charges, until it is
completely full.
The Alpine has pass through charging so you
can use the device while it charges. Note:
This will prolong the charging time of
the device.

BATTERY LIFE
INDICATORS
The 4 LED lights on your Alpine
2020 IH indicate the power level.
4x lights = 100%
3x lights = 75%
2x lights = 50%
1x Red light = 25% or less
We recommend you charge your Alpine for 2
hours max. Although you can not overcharge
an Alpine.

ALPINE 2020 IH
CLEANING GUIDE
To clean your Alpine safely we
recommend something light for
the wood and shell. Windex or
other similar light multipurpose
cleaners work really well. For the
Maple top extra care can be taken
by using wood specific cleaners.

TIPS & TRICKS
Although “respect the click” is the
golden rule sometimes applying an
additional 2 second hold will pump
that first rip to the next level!
Wait until you hear the click from
cooling before going back in for
the second hit.
Not sure how many runs you can
get per bowl? We prefer to go 3 to
4 deep then give the load a check
for color. still green or just light
brown, good to go for another
sesh or 2!

ALPINE 2020 IH
WARRANTY / CARE
Thank you for your purchase of the
Alpine 2020. If you run into any
issues or concerns please reach
out to us via [e-mail]
visit sourcevapes.com to use our
live chat / help desk features