Tokyo Flash KISAI MARU User manual

Change the way you think about time

Button A
Button B
INSTRUCTION MANUAL

This watch uses an “always on” LCD display to show the time.
The time is displayed in a similar way to an analog clock
Hours are shown by the marker that points to the inside of
the display. Minutes are shown by the marker that points to
the outside of the display.
I. Regular mode
Example 08:00
Example 03:35
Hour Marker
Hour Marker
Decorative
Line
Decorative
Line
Minute Marker
Minute Marker
1. How to read the time
•
•
•

Example: May 19th
You can illuminate the display for a short time with the EL
backlight by pressing button A.
This function only works in a very dark environment.
Press button B to display the date. The date icon indicates
that you are in date mode.
The month is shown by the marker that points to the inside
of the display, the day is shown by the marker that points
to the outside of the display.
•The display will change back to time mode after a short time.
I. Turning on the backlight
II. How to read the date
2. Operating the basic functions
Month Marker: May
Date icon
Decorative
Line
Day Marker: 19th
•
•
•
•

Example: 6:20 am
Alarm On
Example: 8:15 pm
alarm off
Press button B twice to display the alarm time.
The alarm mode icon indicates that you are in alarm mode.
The alarm on icon indicates that the alarm is on.
The display will change back to time mode after a short
time.
III. How to check the alarm time
6 hours
Alarm mode icon
Alarm icon
Alarm on icon
Decorative
Line
decorative line
8 hours
AM icon
PM
20 minutes
15 minutes
•
•
•
•

The time icon and hour marker will flash when you are in
hour setting mode.
The AM/PM icon in setting mode indicates that you are
setting the time in AM or PM.
Press button B to increase the hour as required.
Hold button B to increase the hours more quickly.
Press and hold button A for 3 seconds to enter setting
mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
Example: 12:05 PM
Hour Setting
3. How to set the time and animation
I. Setting the hour
12 hours flashing
5 minutes
Decorative Line
Time icon
flashing
PM
Press button A to confirm and move to the minutes.
Note: after 7 seconds of inactivity setting mode will deactivate.
•
•
•
•
•
•

Press button A to confirm and move to the animation.
Note: after 7 seconds of inactivity setting mode will deactivate.
•
The time icon and the minute marker will flash when you
are in minute setting mode.
Press button B to increase the minutes as required.
Hold button B to increase the minutes more quickly.
Example: 12:09 PM
Minute Setting
12 hours
9 minutes
flashing
Decorative Line
Time icon
flashing
PM
II. Setting the minutes
•
•
•

This watch has an animation feature. When set, the display
will animate every 5 minutes.
Press button B to turn the animation on or off.
In setting mode, when the animation is on, the display will
animate. When the animation is off, the display will flash.
Press button A to confirm and exit setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
Example: segments will
animate
V. Setting the animation
•
•
•
•

Press button B to display the date.
Press and hold button A for 3 seconds to enter date
setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
4. How to set the date
I. Setting the month
The date icon and the month marker will flash when you
are in month setting mode.
Press button B to increase the month as required.
Hold button B to increase the month more quickly.
Example: October 25th
Month Setting
Press button A to confirm and move to date.
Note: after 7 seconds of inactivity setting mode will deactivate.
•
•
•
•
•
•
Button B
Button A
Month (October)
flashing
Day (25th)
Date icon
flashing

The date icon and the date marker will flash when you are
in date setting mode.
Press button B to increase the date as required.
Hold button B to increase the date more quickly.
Example : October 26th
Day Setting
II. Setting the date
Press button A to confirm and exit setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
•
•
•
•
Button B
Button A
Month (October)
Day (26th)
flashing
Date icon
flashing

Press button B twice to display the alarm time.
Note: after 7 seconds of inactivity setting mode will deactivate.
Hold button A for 3 seconds to enter alarm setting mode.
Note: after 7 seconds of inactivity setting mode will deactivate.
The alarm icon and the hour marker will flash.
The AM / PM icon in setting mode indicates that you are
setting the alam time in AM or PM.
Press button A to turn the alarm on or off. The alarm icon
indicates that the alarm is on.
Example 1: Alarm On
7:45 am
Alarm On/Off Setting
5. How to set the alarm time
I. Turning the alarm on or off
II. Setting the alarm hour
•
•
•
•
•
7 hours
Alarm On
icon
Alarm icon
AM
45 minutes

III. Setting the alarm minutes
Press button B to increase the hour as required.
Hold button B to increase the hours more quickly.
The alarm icon and the minute marker will flash.
Press button B to increase the minutes as required.
Hold button B to increase the minutes more quickly.
Example 2: Alarm off
8:45 am
Hours Setting
Example 2: alarm off
8:00 am
minutes setting
Press button A to confirm and move to alarm minutes.
Note: after 7 seconds of inactivity setting mode will desactivate.
Press button A to confirm and exit setting mode.
Note: after 7 seconds of inactivity setting mode will desactivate.
•
•
•
•
•
•
•
8 hours
flashing
8 hours
Alarm icon
flashing
Alarm icon
00 minutes
flashing
AM
AM
45 minutes

This watch is covered by a 1 year warranty. This warranty
does not cover water damage, accidental damage, neglect
or unauthorized repair.
II. Warranty
This watch uses a CR2025 replaceable watch battery.
Battery lifetime will vary depending on use, but is
estimated to last for at least one year.
To maximize battery life you should limit use of the EL
backlight.
This watch is water resistant to 3ATM. Please do not use
the watch in the shower, for swimming or for other water
related activities.
8. User information
I. Battery
III. Caution
•
•
•
•
•

Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Water Resistance
Strap Materials
Finish
Weight
Battery
Aluminium
Stainless Steel / Aluminium
41 x 50 x 11.5 mm
213 mm (approx.)
LCD with EL backlight
3ATM
Satin
80g
CR2025
SPECIFICATIONS