Tomahawk TMOP18e User manual

TMOP18e
Mini Floor Scrubber Operations Manual
W
A
R
R
A
N
T
Y

2
Table of Contents
1. Safety Information
- Fire Safety
- Operating Safety
- Service Safety
2. PRODUCT DATA
- Specifications
- Features
- Handle Features
3. INTENDED USE OF THE EQUIPMENT
- Non Intended Use of the Equipment
4. OPERATION
- Filling the Cleaning Solution Tank
- Operating the Equipment
- Modes
- Stopping the Equipment
5. CLEANING & STORAGE
- Cleaning
- Storage
6. MAINTENANCE
- Brush Replacement
- Squeegee Replacement
- Attaching a New Squeegee
- Replacing the Hose
- Maintenance Record
7. TROUBLESHOOTING
8. REPLACEMENT PARTS
9. WARRANTY
- Warranty Claims
10. CATALOG & COUPON
4
5
5
6
6
6
7
7
8
8
9
9
9
9
10
10
10
11
11
11
11
12
12
13
14
15
15
15
18

3
Register Your Equipment
Thank you for purchasing TOMAHAWK® equipment! Your product is covered by the
TOMAHAWK® Warranty policy, but in order to activate your warranty, we need you to register
your product. In addition to activating your equipment warranty, product registration will
grant you access to important product updates, streamlined customer service and more.
INCLUDED WITH YOUR REGISTRATION
☑ Equipment Warranty Activation
☑ Product Updates
☑ Streamlined Customer Service
☑ Excusive Discounts and Sales
STEPS TO REGISTER YOUR EQUIPMENT
1. Visit www.tomahawk-power.com
2. Choose “Product Registration” at the bottom of the page
3. Enter your equipment’s serial number to get started
4. Provide all required information
5. Submit Registration
Equipment Resources
TOMAHAWK® Customer Service doesn’t stop at checkout. We understand to keep a job-site
running smoothly - the proper equipment, spare parts, instruction manuals, and more are
needed at the drop of a hat. Visit www.tomahawk-power.com to gain access to the incredible
resources below.
How To Video Library
More of a visual person? Visit our Video Library for equipment
assembly instructions, troubleshooting tips, and more!
Found at the TOMAHAWK® Resource Center
Manual and Assembly Guide Library
Visit our Manual Library if you are looking for a lost
operations manual or a particular spare part?
Found on the TOMAHAWK® Manuals Page
Service Requests
In need of a quick fix or a service center referral? Submit a
Service Request and a TOMAHAWK® Technician will respond
shortly to get you the help you need.
Choose “Service Request” at the bottom of www.tomahawk-power.com

This manual provides information and procedures to safely operate and maintain this
model. For your own safety and protection from injury, carefully read, understand and
observe the safety instructions described in this manual.
Keep this manual or a copy of it with the machine. If you lose this manual or need an
additional copy, please contact TOMAHAWK® or visit www.tomahawk-power.com This
machine is built with user safety in mind; however, it can present hazards if improperly
operated and serviced. Follow operating instructions carefully. If you have questions about
operating or servicing this equipment, please contact TOMAHAWK®.
The information contained in this manual is based on machines in production at the time of
publication. TOMAHAWK® reserves the right to change any portion of this information
without notice.
No part of this publication may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission from
TOMAHAWK®.
Any type of reproduction or distribution not authorized by TOMAHAWK® represents an
infringement of valid copyrights and will be prosecuted. We expressly reserve the right to
make technical modifications, even without due notice, which aim at improving our
machines or their safety standards.
1. Safety Information
This manual contains DANGER, WARNING, CAUTION, and NOTE callouts which must be
followed to reduce the possibility of personal injury, damage to the equipment, or improper
service.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
DANGER
WARNING
CAUTION
4

5
1.1 Fire Safety
If your machine catches fire, turn off the electric supply. Using a dry powder or C02 fire
extinguisher, put out the fire. If the fire cannot be put out, keep away and call the fire
departement. If you are in any doubt about the safety condition of your machine, please
consult TOMAHAWK®.
1.2 Operating Safety
Familiarity and proper training are required for the safe operation of equipment!
Equipment operated improperly or by untrained personnel can be dangerous! Read
the operating instructions contained in both this manual and the engine manual and
familiarize yourself with the location and proper use of all controls. Inexperienced operators
should receive instruction from someone familiar with the equipment before being allowed
to operate the machine.
1.2.1 NEVER allow anyone to operate this equipment without proper training. People
operating this equipment must be familiar with the risks and hazards associated with it.
1.2.2 NEVER use accessories or attachments for this equipment, which are not
recommended by TOMAHAWK®. Damage to the equipment and/or injury to user may occur.
1.2.3 NEVER leave machine running unattended.
1.2.4 ALWAYS be sure operator is familiar with proper safety precautions and operation
techniques before using machine.
1.2.5 ALWAYS wear hearing protection when operating equipment.
1.2.6 ALWAYS wear protective clothing appropriate to the job site when operating
equipment.
1.2.7 ALWAYS wear hearing protection when operating equipment.
1.2.8 ALWAYS store equipment properly when it is not being used. Equipment should be
stored in a clean, dry location out of the reach of children.
1.2.9 ALWAYS operate machine with all safety devices and guards in place and in working
order. DO NOT modify or remove safety devices. DO NOT operate machine if any safety
devices or guards are missing or inoperative.
1.2.10 ALWAYS read, understand, and follow procedures in Operator's Manual before
attempting to operate equipment.
WARNING

6
1.3 Service Safety
For your own personal protection and for the safety of those around you, please read
and ensure you fully understand the following safety information. It is the
responsibility of the operator to ensure that he/she fully understands how to operate
this equipment safely. If you are unsure about the safe and correct use of this equipment
consult your supervisor.
1.3.1 DO NOT attempt to clean or service machine while it is running. Rotating parts can
cause severe injury.
1.3.2 ALWAYS replace worn or damaged components with spare parts designed and
recommended by TOMAHAWK®.
1.3.3 ALWAYS keep machine clean and labels legible. Replace all missing and hard-to-read
labels. Labels provide important operating instructions and warn of dangers and hazards.
1.3.4 Cordon off the work area and keep members of the public and unauthorized personnel
at a safe distance.
1.3.5 Personal Protective Equipment (PPE) must be worn by the operator whenever this
equipment is being used.
1.3.6 Make sure you know how to safely switch this machine OFF before you switch it ON in
case you get into diffculty.
1.3.7 Always switch OFF before transporting, moving it around the site, or servicing it.
1.3.8 During use, the battery may become very hot, allow the battery to cool before
touching it.
1.3.9 NEVER pull or guide the machine using the cable and never pull on the cable to
disconnect the plug.
1.3.10 DO NOT operate the machine when you are ill, feeling tired, or when under the
influence of alcohol or drugs.
1.3.11 Ensure that any trailing cable is protected against damage and not liable to be tripped
over or trapped underneath the machine.
1.3.12 DO NOT use the Motor Guard as a Liing Point.
1.3.13 DO NOT use this machine in wet conditions.
2. PRODUCT DATA
2.1 SPECIFICATIONS
WARNING
MODEL TMOP18e
Rated Voltage 36V
Brush Dimension 8.3in. X2
Brush Speed 0-450prm/min
Brush Motor Power 36V-120w
Brush Pressure 13.2 lb
Soluon Tank Capacity 1.05 Gal
Recovery Tank Capacity 1.71 Gal
Noise Level 65-67 DB
Baery 78 Minutes
Weight (Net/Gross) 36.4/58.4 lb
Dimensions 45.7x21x11.2 in

7
2.2 Features
2.3 Handle Features
2.3.1 Power switch (ON/OFF)
2.3.2 Water pump(ON/OFF)
2.3.3 Battery indicator
2.3.4 Vacuum Motor(ON/OFF)
2.3.5 Speed Adjustment- Low “-”
2.3.6 Speed Adjustment- High “+”
2.3.7 Brush Motor(ON/OFF)
1 Top Handle 7 Surrounding Fence
2 Recovery Tank 8 Castor Wheels
3 Scrub Deck 9 Soluon Tank
4 Baery Pack Box Knob 10 Carrying Handle
5 Baery Pack Box 11 Squeegee Assembly
6 Bumper Wheels 12 Brushes

8
3. INTENDED USE OF THE EQUIPMENT
The TOMAHAWK® TMOP18e is designed with the intention of revolutionizing the way we
clean our floors. Unlike traditional mops, the TOMAHAWK® TMOP18e operates on a
rechargeable battery, eliminating the need for strenuous manual labor. The intended use of
the TOMAHAWK® TMOP18e is to provide a convenient and efficient cleaning solution for
various surfaces, including hardwood floors, tiles, and laminate. With its motorized spinning
brushes, the TOMAHAWK® TMOP18e effortlessly removes dirt, grime, and stubborn stains,
leaving floors sparkling clean.
3.1 Non-Intended Use Of The Equipment
Using this mop for non-intended purposes can have consequences for the safety of
operators and bystanders, and it may also void the warranty on the product.
3.1.1 NEVER operate the equipment near flammable dusts, liquids, or vapors.
3.1.2 NEVER operate the equipment when flammable or poisonous liquids like gasoline, oil
acids, or other chemicals are present on the floor.
3.1.3 DO NOT fill the equipment with any flammable solutions. ONLY use water-based
solutions.
3.1.4 DO NOT use cleaning solutions with a pH below 3 or above 11. Using these solutions
can damage the equipment and void the warranty.
3.1.5 DO NOT use water that exceeds 113°F/45°C. Using water above this temperature will
void the tank warranty.
3.1.6 DO NOT use the equipment outside or on uneven surfaces.
3.1.7 DO NOT store the equipment outside in order to avoid damage to electronic
components.
3.1.8 ONLY use manufacturer supplied parts for maintance.
3.1.8 ONLY trained adults that have read and understand the operation manual should
operate the machine.
3.2 Modifications
Any modifications made to the TOMAHAWK® TMOP18e will void the manufacturer warranty.
Contact TOMAHAWK® customer service prior to any attempt at modification of machine.

9
4. OPERATION
BEFORE YOU START always check the brushes and squeegee for wear and tear.
NOTE: It is not recommended to use the battery when charged below 40%
4.1 Filling the Cleaning Solution Tank
4.1.1 Remove the stopper.
4.1.2 Pour in a maximum of 18gal/4L of cleaning fluid.
4.1.3 Replace the stopper and make sure it seals tight.
4.1.4 Put the TMOP18e in park position.
4.1.5 Put the tank on the TMOP18e with the valve first.
4.1.6 Press the tank downward to break the valve seal.
4.1.7 Push the tank into place until you hear a "click".
4.1.8 Clean your hands aerwards.
4.2 Operating The Equipment
4.2.1 Crouch down while holding the carrying handle of the scrub deck firmly with one hand.
4.2.2 Push the handle forward with your other hand.
4.2.3 Bring the scrub deck slowly down to the floor.
4.2.4 Stand behind the TMOP18e.
4.2.5 Choose your cleaning mode via the mode buttons/switches, aer pressing down the
main On/Off switch first at the rear side of the control panel. Meanwhile, the battery
indicator will illuminate power.
4.2.6 Hold the handle with both hands.
4.2.7 Walk behind the TMOP18e.
4.2.8 Steer by gently turning the handle le or right to move the scrub deck.
4.3 MODES
MODE 1: Vacuum Only
MODE 2: Brush Only
MODE 3: Water/Cleaner Solution Only
MODE 4: Vacuum + Brush
MODE 5: Vacuum + Water/Cleaning Solution
MODE 6: Brush + Water/Cleaning Solution
MODE 7: Brush + Water/Cleaning Solution + Vacuum

10
4.3 Modes Continued
NOTE: Press all corresponding buttons for MODE
4.4 Stopping the Equipment
Note: Releasing the main ON/OFF switch will immediately stop the machine.
4.4.1 Press water cleaning button to stop the water releasing
4.4.2 Press brush button to stop the brush
4.4.3 Press vacuum button to stop the vacuum
4.4.4 Press power to shut off
5. CLEANING & STORAGE
5.1 Cleaning
5.1.1 Dispose water or cleaning solution from both tanks in an appropriate drain.
5.1.2 To clean the recovery tank thoroughly:
• Partially fill the tank with fresh water and hold it horizontally with the holes facing up.
• Tilt the tank repeatedly, thoroughly rinsing all the dirt and debris out from the tank.
5.1.3 To clean the solution tank, follow the same procedure.
Tip: Dry the tanks to avoid needing a replacement.
5.1.4 Check to see if both brushes are clean and intact.
• Clean the under fresh water or replace them if necessary.
• Replace brushes if the yellow wear indicator is the same height as other bristles.

11
5.1.5 Check to see if the squeegee is clean and intact.
• Clean it with fresh water and wipe it with a clean, damp cloth.
• Replace the squeegee blades when necessary.
5.2 Storage
5.2.1 Please ensure that the machine is parked in a place where nobody can bump into it.
5.2.2 Put the machine in the park position.
5.2.3 Store the machine close to a wall with the handle pointing towards the wall and the
brushes facing away from thewall.
6. MAINTENANCE
6.1 Brush Replacement
6.1.1 Put the machine in the park
position.
6.1.2 The brushes connect on the
machine by magnetic force. Grab the
le and right side of the brushes
(stripping pads holder) with two hands
and pull the brush out against
machine.
6.1.3 Visually inspect the motor disks
6.1.4 Clean the machine’s scrub deck
with a clean, dry cloth before installing
the brushes or stripping pads holder.
6.2 Squeegee Replacement
The squeegee blades come in pairs and
wear out over time. When you notice
the floor is no longer being dried
properly, replace the squeegee blades.
6.2.1 Put the machine in the park
position.
6.2.2 Hold the scrub deck firmly with
one hand.
6.2.3 Use the supplied hex wrench to
remove the two hexagonal screws
inside the squeegee completely.
6.2.4 Pull out the squeegee properly.
6.2.5 Remove the vacuum hose from
the squeegee by twisting the hose.
6.2.6
Unscrew the 8 plastic nuts on the
back (refer to the previous image).
6.2.7 Take off the squeegee rear plate.

12
6.2.8 Once the plastic part is removed, you can easily take off the rear rubber blade.
6.2.9 Push the 8 screws through the front blade in order to remove the squeegee front plate.
6.2.10 Take off the rear rubber blade.
6.2.11 Inspect the front and rear rubber blades:
• The first time: flip the blades so the top of the blade is now facing the floor. Push the front
plate screws through the holes.
• The second time: attach a new set of blades. Push the front plate screws through the holes.
NOTE: The special squeegee blades that contain small arrow-like shapes cannot be
switched. These need to be replaced everytime.
• Put back the plastic rear plate.
• Screw the 8 plastic nuts on the back.
6.3 Attaching a New Squeegee
6.3.1
Take the vacuum hose
6.3.2 Insert the hose connector (refer to the above image) in the Squeegee.
6.3.3 Twist the hose connector 1/4 turn for a firm fit.
6.3.4 Carefully pull the vacuum hose from the top of the machine
6.3.5 Hold the scrub deck firmly with one hand.
6.3.6 Align the pins on the scrub deck with the holes on the squeegee.
6.3.7 Screw the squeegee in place
6.4 Replacing The Hose
6.4.1
Detach the squeegee as described in above sections.
6.4.2 Remove the solution tank. You can see where the vacuum hose is connected at the
AMOP-3 handle.
6.4.3 Hold the scrub deck firmly with one hand，
6.4.4 Detach the vacuum hose by twisting the connector 1/4 turn anticlockwise.
6.4.5 Now you can carefully pull the vacuum hose from the top of the machine.
6.4.6 Guide the new vacuum hose via the opening to the hose connector located at the
AMOP-3 handle.

13
6.4 Replacing The Hose (Continued)
6.4.7
Connect the top to the hose
connector by twisting the clockwise 1/4
turn until they have lined up.
6.4.1 Reinstall the squeegee.
6.5 Maintenance Record
TOMAHAWK® tools are assembled with care and will provide years of service when properly
maintained. Preventative maintenance and routine service are essential to the long life of
your equipment. Adhere to reading through this manual thoroughly. You will find that you
can do some of the regular maintenance yourself. However, when in need of parts or major
service, be sure to contact a TOMAHAWK® Technician. For your convenience we have
provided this space to record relevant data about your TOMAHAWK® equipment.

7. TROUBLESHOOTING
14
14

8. REPLACEMENT PARTS
8.1 
8.2 


8.3 

8.4            

9. WARRANTY
Your new TOMAHAWK® equipment is warranted to the original purchaser for a period of
one-year.
(12 months) from the original date of purchase. The TOMAHAWK® warranty is against defects
in design, materials and workmanship.
The following are not covered under the warranty:
1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a
result of failure to follow assembly, operation or user maintenance instructions.
2. Alterations, additions or repairs carried out by persons other than TOMAHAWK® or their
recognised agents.
3. Transportation or shipment costs to and from TOMAHAWK® or their recognised agents, for
repair or assessment against a warranty claim, on any machine.
4. Materials and/or labor costs to renew, repair or replace components due to fair wear and
tear.
TOMAHAWK® and/or their recognised agents, directors, employees or insurers will not be
held liable for consequential or other damages, losses or expenses in connection with or by
reason of or the inability to use the machine for any purpose.
9.1 Warranty Claims
Before submitting any warranty claim, your new TOMAHAWK® equipment should be
registered through www.tomahawk-power.com. Follow the steps on page 3 to complete the
equipment registration. Aer registration is complete, all warranty claims should firstly be
directed to TOMAHAWK® through the online Service Request form found at
www.tomahawk-power.com
15

16
24
TAKE BACK YOUR YARD
Enjoy the outdoors again.
Tomahawk mosquito foggers deliver the
power to eliminate virus-carrying pests,
before they ruin outdoor activities for your
friends and family. 10x Faster than manual
sprayers, cover 1 acre in less than 30 minutes
with ǔǐƚ*!  #ю- /!*-4 -ѣ-*0)0. я
*(#2&*"" -.- '.*) 3 '' )/' !
blowing solution. No matter the season, keep
your yard pest free and looking great!
Item #: TMD14
3.7 GALLON TURBO
BACKPACK FOGGER
www.tomahawk-power.com

17
IN LESS TIME
*-$" - .) 0.4 .# 0' .я *(#2& ХЪќ+0.# .2 + -. *1 - 
wider path to reach more surface area so you can finish sweeping faster
around indoor and outdoor spaces and on wet or dry surfaces!
CLEAN MORE
Item #: TOS38
www.tomahawk-power.com
14.5 GAL COMMERCIAL
38” PUSH SWEEPER

1.6HP Backpack Concrete Vibrator
Part#: TVIBH + TVW10-P
1.6 HP Honda GX35 engine
Consolidation with speeds of 10,000-12,000 VPM
Quick Connect centrifugal clutch vibrator
1” and 2” Diameter Whips Available in 10ft Length
3 Year Engine Warranty & 1 Year Product Warranty
8” Gas Powered Concrete Scarifier
Part#: TSCAR8H
5.5 HP Honda GX160 Engine
Remove traffic lines at 800 - 1,000 linear ft/hr
Tungsten Carbide Blade Kit Available
OSHA approved dust port for silica vacuum removal
3 Year Engine Warranty & 1 Year Product Warranty
36” & 46” Concrete Power Trowel
Part#: TPT36H/K & TPT46H/K
6 HP/14HP Kohler & 5.5HP/8.5HP Honda Engines
Adjust trowel blade pitch from 0-28°
60-115 RPM rotor speed for superior concrete finishes
Includes float pan and trowel blades
3 Year Engine Warranty & 1 Year Product Warranty
HAVE QUESTIONS?
Contact us. We’re here to help!
Email us at [email protected]
3,550 lbs/ft Vibratory Rammer
Part#: TR68H
3.6 HP Honda GXR120 Engine
Easily achieve a 100% compaction rating
3-in-One Fuel System with carburetor protection
13” x 11” plate for narrow trenches and corners
3 Year Engine Warranty & 1 Year Product Warranty
3,400 lbs/ft Plate Compactor
Part#: TPC90H
5.5 HP Honda GX160 Engine
Easily achieve a 100% compaction rating
22” x 20” cold, rolled steel beveled base plate
Includes 3.5 gallon water tank for asphalt compaction
3 Year Engine Warranty & 1 Year Product Warranty
3,000 lbs/ft Plate Compactor
Part#: TPC80 & TPC80H
6 HP Kohler CH260 & 5.5 HP Honda GX160 Engines
Easily achieve a 100% compaction rating
16.5” x 21.5” plate for narrow trenches and corners
Optional Honda Engine model: TPC80H
3 Year Engine Warranty & 1 Year Product Warranty
COMPACTION
6.5 Gal Backpack Concrete Sprayer
Part#: TCS6.5
Maintain constant, adjustable pressure up to 450 PSI
Achieve superior concrete finishes with even spraying
Spray 15,000 sq ft in less than 10 minutes
Compatible with major manufacturer wands
1 Year Product Warranty
1.6 HP Vibratory Concrete Screed
Part#: TVSA-H
1.6 HP Honda GX35 Engine
Aluminum Magnesium blades available from 8ft - 14ft
Finish concrete 4X faster than other screed methods
360° adjustable handle placement
3 Year Engine Warranty & 1 Year Product Warranty
6” Early Entry Green Concrete Saw
Part#: TFS6H
5.5 HP Honda GX160 Engine
Maximum cutting depth of 1 3/16 inches
OSHA compliant vacuum port for dust collection
Includes 6” early entry concrete blade
3 Year Engine Warranty & 1 Year Product Warranty
FINISHINGFINISHING
1.6HP Backpack Concrete Vibrator
Part#: TVIBH + TVW10-P
1.6 HP Honda GX35 engine
Consolidation with speeds of 10,000-12,000 VPM
Quick Connect centrifugal clutch vibrator
1” and 2” Diameter Whips Available in 10ft Length
3 Year Engine Warranty & 1 Year Product Warranty
8” Gas Powered Concrete Scarifier
Part#: TSCAR8H
5.5 HP Honda GX160 Engine
Remove traffic lines at 800 - 1,000 linear ft/hr
Tungsten Carbide Blade Kit Available
OSHA approved dust port for silica vacuum removal
3 Year Engine Warranty & 1 Year Product Warranty
36” & 46” Concrete Power Trowel
Part#: TPT36H/K & TPT46H/K
6 HP/14HP Kohler & 5.5HP/8.5HP Honda Engines
Adjust trowel blade pitch from 0-28°
60-115 RPM rotor speed for superior concrete finishes
Includes float pan and trowel blades
3 Year Engine Warranty & 1 Year Product Warranty
HAVE QUESTIONS?
Contact us. We’re here to help!
Email us at [email protected]
3,550 lbs/ft Vibratory Rammer
Part#: TR68H
3.6 HP Honda GXR120 Engine
Easily achieve a 100% compaction rating
3-in-One Fuel System with carburetor protection
13” x 11” plate for narrow trenches and corners
3 Year Engine Warranty & 1 Year Product Warranty
3,400 lbs/ft Plate Compactor
Part#: TPC90H
5.5 HP Honda GX160 Engine
Easily achieve a 100% compaction rating
22” x 20” cold, rolled steel beveled base plate
Includes 3.5 gallon water tank for asphalt compaction
3 Year Engine Warranty & 1 Year Product Warranty
3,000 lbs/ft Plate Compactor
Part#: TPC80 & TPC80H
6 HP Kohler CH260 & 5.5 HP Honda GX160 Engines
Easily achieve a 100% compaction rating
16.5” x 21.5” plate for narrow trenches and corners
Optional Honda Engine model: TPC80H
3 Year Engine Warranty & 1 Year Product Warranty
COMPACTION
6.5 Gal Backpack Concrete Sprayer
Part#: TCS6.5
Maintain constant, adjustable pressure up to 450 PSI
Achieve superior concrete finishes with even spraying
Spray 15,000 sq ft in less than 10 minutes
Compatible with major manufacturer wands
1 Year Product Warranty
1.6 HP Vibratory Concrete Screed
Part#: TVSA-H
1.6 HP Honda GX35 Engine
Aluminum Magnesium blades available from 8ft - 14ft
Finish concrete 4X faster than other screed methods
360° adjustable handle placement
3 Year Engine Warranty & 1 Year Product Warranty
6” Early Entry Green Concrete Saw
Part#: TFS6H
5.5 HP Honda GX160 Engine
Maximum cutting depth of 1 3/16 inches
OSHA compliant vacuum port for dust collection
Includes 6” early entry concrete blade
3 Year Engine Warranty & 1 Year Product Warranty
FINISHINGFINISHING
17

USE CODE
SAVE10
AT CHECKOUT FOR
10% OFF YOUR ORDER AT
WWW.TOMAHAWK-POWER.COM
www.tomahawk-power.com
www.tomahawk-power.com
[phone]
ASSEMBLED IN THE
PARTS SOURCED GLOBALLY
USA
INVERTER SERIESINVERTER SERIES
www.tomahawk-power.com
[phone]
3.7 Gallon 3HP Backpack Fogger
Part#: TMD14
Turbo Boosted Pump with 40ft + Horizontal Reach
Sprays 1 acre in 30 minutes
10X Faster than Manual Pump Sprayers
Converts to Leaf Blower with 200 MPH Air Velocity
1 Year Product Warranty
Commercial 38" Push Sweeper
Part#: TOS38
Collect up to 14.5 gallons of dust and debris
Can be used indoors & outdoors on wet or dry surfaces
Includes integrated airflow control and fine dust filter
Lightweight design, capable of fitting through doorways
1 Year Product Warranty
210 Amp Portable Welder Generator
Part#: TWG135Ai
Steady 50 - 135 Amp DC welding output
3300 Watt Inverter Generator
60% Duty Cycle for extended use
Suitable for welding rods from 6010 to 7024
2 Year Product Warranty
210 Amp Portable Welder Generator
Part#: TWG210A
Steady 50 - 210 Amp DC welding output
2000 Watt Inverter Generator
60% Duty Cycle for extended use
Suitable for welding rods from 6010 to 7024
2 Year Product Warranty
INVERTER SERIES
Part#: TG2000i
2000 Max Watts, 1600 Rated Watts
Run Time of 8 hours on 1 gallon of gas
OSHA and GFCI Compliant
Parallel technology capable for double the power
2 Year Product Warranty
2000 Watt Inverter Generator
5 Gallon Backpack Power Sprayer
Part#: TPS25
Reach Up to 30ft Horizontal Reach
Sprays acres in 10 minutes
10X Faster than Manual Pump Sprayers
50-435 Adjustable PSI Commercial Grade Pump
1 Year Product Warranty
4.75 Gallon Battery Power Sprayer
Part#: eTPS18
Reach Up to 30ft Horizontal Reach
Sprays 6000 sq ft in 10 minutes
10X Faster than Manual Pump Sprayers
70 PSI Commercial Grade Pump
1 Year Product Warranty
4 Gal. Motorized Fertilizer Spreader
Part#: TGS30
Reach up to 30ft Horizontally
Sprays 1 acre in 30 minutes
20X Faster than push spreaders
Converts to Leaf Blower with 200 MPH Air Velocity
1 Year Product Warranty
3” Full Trash Water Pump
Part#: TW3H
Moves liquids at a rate up to 375 gal/min
Handle solids up to 1.5"
Silicone carbide seals and a chrome plated volute
8 HP engine protected by rugged all purpose frame
3 Year Engine Warranty & 1 Year Product Warranty
AND MORE GENERATORSWELDING / POWER
INVERTER SERIES
Part#: TG2000i
2000 Max Watts, 1600 Rated Watts
Run Time of 8 hours on 1 gallon of gas
OSHA and GFCI Compliant
Parallel technology capable for double the power
2 Year Product Warranty
2000 Watt Inverter Generator
AND MORE POWER / WELDINGPEST CONTROL
ASSEMBLED IN THE
PARTS SOURCED GLOBALLY
USA
* All coupons in this manual are valid only for orders placed on www.tomahawk-power.com, unless otherwise noted. Coupon codes
may only be used once per customer and may not be combined with any other offer. Coupons may expire at any time without notice.

Tomahawk understands to keep a job-site running smoothly the proper equipment and
spare parts are needed at the drop of a hat. With same day shipping and faster
delivery times, count on Tomahawk to keep you powered throughout the day! With
long lasting parts and engines, Tomahawk equipment will be the star of your fleet for
years to come. Visit www.tomahawk-power.com to get started today!
Power Your World
FACEBOOK
facebook.com/TomahawkPowerUSA
YOUTUBE
youtube.com/TomahawkPower
INSTAGRAM
@tomahawkpower
TOMAHAWK®, LLC
San Diego, CA
Sales Support
[phone]
[email protected]
Equipment Support
[phone]
[email protected]
www.tomahawk-power.com