Top Degolle A8 User manual

WIFI Hidden Camera
USER MANUAL
APP:HDMiniCam

TIPS:
1. Please insert a micro SD card if you want a recording. You can
playback the video from Micro SD card on the APP.
2. P2P Mode: Blue light is always on, Red light is flashing slowly
-1-

Router Mode: Blue light is always on, Red light is also always on. If
the router mode is set up unsuccessfully, the Blue light is always on,
the Red light is flashing quickly. Then you have to reset the
camera,when the red light is flashing slowly,please connect the
camera WIFI again.
3. Reset Function: Please press the “reset” button till all indicated lights
are off , which mean the camera reset successfully.
II. Get started(iPhone Version)
Step1: Before APP Download & Installation
Make sure your device is connected with Wi-Fi.
The camera is compatible with Wi-Fi 2.4 GHz only, but not 5.0 GHz.
(The camera does not work with the public network needed to be
authorized on website.)
Step2: Download the App named “HDMiniCam”.
Download and install the App named HDMiniCam from Google
Play Store (for Android) or Apple Store (for iOS).
Step3: Plug the camera into outlet.
Please wait two minutes till the camera WIFI signal named “CM...”
appears on your devices WIFI list.(Photo-1)
-2-

(Photo-1)
If you can’t search the camera WIFI on your device WIFI list,please
reset the camera (you have to stab the “reset” button with pin till all
lights are off).when the red light is flashing slowly,search the camera
WIFI again.
Step4:How to operte the app (iPhone Version)
After connecting camera WIFI successfully,please enter the app,the
-3-

camera will be added on the app main page automatically(Photo-2),Then
press “OK”button.
(Photo-2)
If not,please quit the app,then turn on the app again.
-4-

Or you can press “ ”>>press”Add new online Camera”>>press
camera IP address.(Photo-3 to Photo-6)
(Photo-3) (Photo-4)
-5-

(Photo-5) (Photo-6)
TIPS: This is the P2P mode, which you can view live video without
any network. Till now, you have completed the Mode One, you can
click the online camera to view the video within about 5
Meters.(Photo7 to Photo-9).
-6-

(Photo-7) (Photo-8)
-7-

(Photo-9)
Note: the camera is no night vision function,so even if you open
the “night vision”button at night,you don’t record anything.
But when you leave from the camera, the camera will be
offline.
Dear, Please don’t worry it. We can take the next steps again.
Step7: Internet Mode Configuration
Now Press“ ”icon , a list will pop up, choose “Device Settings”
and continue.（Photo-10 to Photo-11）
-8-

(Photo-10) (Photo-11)
Here comes another page, please select “WIFI
Config”(Photo-12).Select your home router WIFI for
connection.(Photo-13).Input WIFI password and press
“OK”(Photo-14).Finally return back the app main page (Photo 15 to
Photo-19)
The camera will restart and ready in another 3mins.You will see the
-9-

camera changing the status,logging in,request service,connecting.
When you see the camera 'Online', the WIFI is set successfully. You
can remote view video now when you are out.
(Photo-12) (Photo-13)
-10-

(Photo-14) (Photo-15)
(Photo-16) (Photo-17)
-11-

(Photo-18) (Photo-19)
You can add more cameras in your camera list in the same
way.(Follow Step1 to Step7)
III. Alarm Configuration
Tap to enter Settings>Device Settings
Motion detection sensitivity: When motion detection is enabled, the
device will send you an alarm automatically if motion is detected.
You can choose a sensitivity level for Motion detection. It has 7
levels. When you choose “disabled”, motion detection will be
closed.
Alarm schedule: You can set a time period only in which it sends
alarm information to you.
Warming Tone: After enabling motion detection (Motion detection
-12-

sensitivity is not set to “disabled”), you can enable the camera to
send out alarm sound or not. This function applies to certain types.
For some types, if smoke/gas detection is available, the alarm also
can be triggered. When it sounds an alarm, you can tap the icon to
stop it.
Alarm interval: After enabling motion detection, if motion is
detected, the camera will perform alarm. You can type in an Arabic
number between 30 with 300 to set the time interval between two
alarms.
Push notifications: You can enable or disable this functionality. If
you enable it, it will send you alarm information even if exit the App
in iOS-powered devices, or run the App in background in
Android-powered devices.
On-Screen Display: If you enable this functionality, it will display
current time in the app.
Certain types with smoke/ gas detection functionality have a more
item to enable or disable smoke/ gas detection alarm. After setting,
please tap “OK” to save it.
IV. SD Card Record Configuration
Record: If you want to record all the time, please choose “All day”.
If you choose “On alarm”, you need to enable motion detection. You
can also choose “Timing Record” to set a time only in which it
records videos into Micro SD card.
Resolution: You can choose the resolution of video recorded in the
Micro SD card (not live video).
File length (minute): It creates a file every 3 minutes by default (that
means it will automatically generate a video file every 3 minutes and
-13-

continue recording). You can type in a number to set file length
between 1 and 20 minutes.
Record sound: When you enable this functionality, it will record
sound while recording video.
Loop recording: Turn ON: the micro SD card will be overwritten
after its space is full.
Note:
Please Plug the camera when insert or remove the micro SD card.
If a micro SD card is not recognized or cannot format when inserted
into slot, please remove and insert again.
Must format micro SD card:
For brand new micro SD card, please format before use.
The micro SD card capacity is not detected.
The micro SD card can NOT be formatted when it is recording,
please select “Close”, then click “OK”.
V. Time Setting
You can select the time
mode(Year/Month/Day;Day/Month/Year;Month/Day/Year).
Select Time Zone according to your local time zone.
Finally click “Sync with App Time”, then the camera time will be in
sync with your device time.
VI. Set camera name and private code
Modify name: Press the camera, select “Modify device”, then
you can modify the name.
Modify password: Click the camera and select “Change”. Please
input new password and confirm password. Current Password is 8888.
-14-

Note:when you forget the password you modified,please reset the
camera.
VI. Add Camera to PC(Windows system)
NOTE: Camera must be connected to network using mobile device first.
(the camera and the PC should connect the same router.)
Run “IPCMultiViewSetupSig V1.7” in CD’s Windows folder and install
on your PC.
The Username is “admin” with NO password, then log in.
Click “ ” to add camera to PC.(Photo-20)
(Photo-20)
Then click “ ”(Photo-21)
-15-

(Photo-21)
Click the camera IP address,then click “OK”(Photo-22)
(Photo-22)
-16-

Click”OK”,then return the client main page.(Photo-23)
(Photo-23)
Double click”Cam”button,(Photo-24).then the image will be
appeared on the main page.(Photo-25)
(Photo-24)
-17-

(Photo-25)
PC Client Setting
Please click the “ ” on the main page(Photo-26).Then you can set the
camera according to your request.(Photo-27)
(Photo-26)
-18-

(Photo-27)
*NOTE ：Please remember the UID and its password if you want to
watch it remotely.
VII. View in Web Browser
Run IP Camera Search Tool in CD’s Windows (MAC OS) folder. Click
Search and double click the camera item listed in the camera list.
The Username is “admin” and no password is required.
You can visit camera only in the local area network (LAN) on Mac.
Make sure the Mac and camera are connected with the same Wi-Fi.
Click “IP Camera Search Tool” icon.
Click “IP address” and then click “Open”.
-19-