Panasonic BB-HCE481A - Network Camera Operating manual

Important Information
Network Camera
Model No. BB-HCM381A (AC Adaptor Type)
BB-HCE481A (PoE Type)
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. After taking away the sand or the dust on the lens, wipe the lens with
lens cleaning paper.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
8. [For BB-HCM381A] Protect the AC adaptor cord and AC cord from
being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the unit.
9. [For BB-HCM381A] When you operate the camera, the power outlet
should be near the camera and easily accessible.
10. Only use attachments/accessories such as stand specified by the
manufacturer.
11. Do not touch the unit, Ethernet cable, AC adaptor, AC adaptor cord
and AC cord during lightning storms.
12. Unplug the unit from power supply when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way, such as the AC adaptor,
AC cord or plug is damaged, the unit does not operate normally, or
has been dropped.
14. Prolonged exposure to direct sunlight or halogen light may damage
CCD sensor.
15. The camera is intended for indoor use only.
16. Keep the SD memory card (customer-provided) out of reach of
children to prevent swallowing.
17. Unplug this unit from power supply if it emits smoke, an abnormal
smell or makes unusual noise. These conditions can cause fire or
electric shock. Confirm that smoke has stopped and contact an
authorized service center.
SAVE THESE INSTRUCTIONS
This manual is for both BB-HCM381A (AC Adaptor Type) and BB-
HCE481A (PoE Type). Available features and operations are different
in part depending on the model. Read the Operating Instructions on
the Setup CD-ROM carefully and use the Network Camera properly.
Please read this manual before using, and save this manual for future
reference.
Panasonic Network Camera Website:
http://www.panasonic.com/netcam
How to Use This Documentation
The Network Camera includes the following 5 manual types.
• Important Information (This manual)
This manual has general information and safety instructions you will
need to understand before installing.
• Getting Started
Getting Started explains the initial configuration of the Network
Camera, to help you to set up the Network Camera quickly and easily.
• Installation Guide
Installation Guide explains mounting methods of the Network Camera.
• Operating Instructions (Included on the Setup CD-ROM)
Operating Instructions explains the operations, settings, features and
maintenance of the Network Camera.
• Troubleshooting (Included on the Setup CD-ROM)
Troubleshooting provides troubleshooting help.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• Pentium is a trademark or registered trademark of Intel Corporation or its
subsidiaries in the United States and other countries.
• All other trademarks identified herein are the property of their respective
owners.
Abbreviations
• "Network Camera" is called "Camera" in this manual.
• "Setup CD-ROM" is called "CD-ROM" in this manual.
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Environment:
Do not install the camera where the temperature is less than 0 °C (+32 °F) or greater than +40 °C (+104 °F). Allow 10 cm (3 15/16 inches) clearance
around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the plug of the AC cord from the outlet (BB-HCM381A) or disconnect the Ethernet
cable from the unit (BB-HCE481A).
If you have any problems:
Consult an authorized Panasonic Factory Service Center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
CR Coin Cell Lithium Battery Information:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Audio and Video Recording Notice
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with
all applicable laws and statutes.
No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camera.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15033ZB KK1105RM1056
Indoor Use Only

System Requirements for your PC
Your PC (Personal Computer) and network must meet the following
technical specifications for the camera to work properly.
For IPv4 Connection
For IPv6 Connection
Note
• A PoE hub is required for BB-HCE481A.
• See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details about
network environment.
What is IPv6?
• IPv6 is short for "Internet Protocol Version 6".
• IPv6 was created to provide the additional IP addresses that will be
needed as the Internet continues to expand.
• IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a
number of years during a transition period.
• Though most ISPs (Internet Service Providers) do not yet support IPv6,
many local networks already use it. When your ISP supports IPv6, your
Panasonic Network Camera will be ready!
• For more information, visit http://www.ipv6.org/.
Item Description
Operating
System
Microsoft®Windows®XP, Microsoft®Windows®2000
Microsoft®Windows®Me, Microsoft®Windows®98SE
CPU • For viewing single camera
Pentium®III (800 MHz or greater is recommended.)
• For viewing multiple cameras
Pentium®4 (1.8 GHz or greater is recommended.)
Protocol TCP/IP protocol
(HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Interface 10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later
(Not included on the CD-ROM)
Audio User-supplied microphone and speaker (required to use
the Talk and Listen features)
Item Description
Operating
System
Microsoft®Windows®XP Service Pack 1 or later
CPU • For viewing single camera
Pentium®III (800 MHz or greater is recommended.)
• For viewing multiple cameras
Pentium®4 (1.8 GHz or greater is recommended.)
Protocol TCP/IP protocol
(HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
Interface 10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later
(Not included on the CD-ROM)
Audio User-supplied microphone and speaker (required to use
the Talk and Listen features)
Security Cautions
When using this product, take appropriate measures to avoid the following
security breaches.
• Leaks of private information via this product
• Illegal use of this product by a third party
• Interference or suspension of the use of this product by a third party
Take the following measures to avoid security breaches:
• To prevent illegal access, keep the firmware up to date
(If you do not have the latest version of firmware, this can lead to
blocked access or information leaks).
• You are responsible for the security settings, such as user name and
password, to access this product. This information should not be made
available to any third parties outside the user group.
• Mount the camera where the camera will not be stolen.
• You are responsible for this product's user information, such as videos,
still images, Internet content, etc. This information should not be made
available to any third parties outside the user group.
• When sending this product to be repaired with a company not related to
Panasonic, make back-up copies of files, if necessary, and reset this
product to factory default.
• When transferring this product to another party, make back-up copies of
files, if necessary, and reset this product to factory default.
• Recorded files stored on the SD memory card can lead to private
information leaks. When sending this product to be repaired or
transferring it to another party, ensure that the SD memory card is
removed.
• When disposing of this product, reset this product to factory default, or
erase information by means of electrical deletion or physical
dismantlement.
User Name and Password Protection
The use of a unique User Name and secret Password is an important
tool that will help limit unauthorized individuals from accessing the
camera. If you choose to disable this tool, and choose not to limit
access by use of a User Name and Password, this may result in
access to the camera by unauthorized individuals. (See page 88 of
the Operating Instructions on the CD-ROM)
Included Items
The following items are provided with the camera.
Main Unit*1. . . . . . . . . . . . . . .1 pc. AC Adaptor [BB-HCM381A Only]
. . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
Order No.: PSLP1242Y
Cord Length: About 3 m (9 feet 10
inches)
AC Cord [BB-HCM381A Only]
. . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Order No.: PSJA1069Z
Cord Length: About 1.8 m (5 feet 11
inches)
Audio/Video Cable . . . . . . . . 1 pc.
Order No.: PSJA1103Z
Cord Length: About 48 cm (1 feet 7
inches)
Ceiling Mounting Cover . . . .1 pc.
Order No.: PSKL1023Y2
Ceiling Plate A . . . . . . . . . . . 1 pc.
Order No.: PSZMHCM381A
Ceiling Plate B. . . . . . . . . . . .1 pc.
Order No.: PSMD1045Y
Screws A . . . . . . . . . . . . . . . 2 pcs.
Order No.: XYN3+J6FJ
Screws B . . . . . . . . . . . . . . .4 pcs.
Order No.: XTB4+20AFJ
Setup CD-ROM . . . . . . . . . . . 1 pc.
Order No.: PQQX15036ZCD
Important Information
(This manual). . . . . . . . . . . . .1 pc.
Getting Started . . . . . . . . . . .1 pc.
Installation Guide . . . . . . . . .1 pc.
The information in this document is subject to change without notice.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal
use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
*1The BB-HCM381A rear view is different from the BB-HCE481A rear view
(see page 9 [BB-HCM381A] or page 11 [BB-HCE481A] of the Operating
Instructions on the CD-ROM).
For product service
• Panasonic Servicenters are listed in the servicenter directory.
• Call 1-800-272-7033 for the location of an authorized servicenter.
• This Network Camera is designed for use in the United States of America. Sale or use
of this product in other countries/areas may violate local laws.
When you ship the product
• Carefully pack your unit, preferably in the original carton.
• Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
• Send the unit to an authorized servicenter, prepaid and adequately insured.
• Do not send your unit to the Panasonic Consumer Electronics Company listed below
or to executive or regional sales offices. These locations do not repair consumer
products.