7
KS LT118A SUB
(1)(3)
(11) (12)(10)
(15)
(14)
(13)
(6)
(7)
(8)
(9)
(5)
(4)
(16)
(2)
(1) Mains input
(2) Mains link
(3) Mains fuse
(4) Full range output channel bon XLR connector.
(5) High pass output channel bon XLR connector.
(6) Input channel bon XLR connector.
(7) Input channel a on XLR connector.
(8) High pass output channel a on XLR connector.
(9) Full range output channel a on XLR connector.
(10) Signal/limit, red LED, indicate on status.
(11) Volume main power amplifier control.
(12) Processing: normal/user(custom sound)
Normal: preset is suitable for subwoofer speakers to reinforce the low frequency, making the sound
more enjoyable.
User: preset is to change different EQ to match the voice that the user need sound, it can be done
by connecting amplifier module to a PC via the LAN port by internet. (the factory preset of User is
the same as Flat, after changed, it can be saved into the product).
(13) Power. green LED, indicate on status.
(14) IP control
(15) Normal / reverse phase switch (polarity).
(16) Stereo I mono switch (full range).
