Torbal AD Series User manual

Percent Weighing – Quick Reference Guide – AD Series


PercentWeighingisusedtocomparetherelativeweightofanunknownitemtothatofapreviouslystoredsample.An
“E”indicatorwillappearonthescreentoindicatethescaleisinPercentWeighingmode.

1. ToenterPercentWeighingMode,pressthe“F”key.Select“percent”bypressingthe“T”key.

 


2. Placeanemptyweighingcontaineronthepan.The
container’sweightwillbedisplayed.Waitfortheweightto
stabilizeandpressthe“T”keytotare.






3. Thescalewilldisplaytheweightofthepreviouslystoredsampleandthecommand“SAMMPLE”sequentially.To
acceptthecurrentsampleweight,pressthe“T”(Yes)key.Tochangethesampleweight,pressthe“Æ0Å”key.

   

Note:Ifthisisthefirsttimethefunctionisused,thesampleweightwillbe
0.000g.







Tochangethesampleweight,placeanewsampleintheweighingcontainer
when“SAPL ON”isdisplayed.Oncestabilized,pressthe“T”(Yes)keytoaccept
thenewweight.
Percent Wei
g
hin
g
(
Percent
)
PERCENT
100.000
100.000 SAMMPLE
------

Percent Weighing – Quick Reference Guide – AD Series









Note:Thereferencesamplemustbeequaltoorgreaterthan100d.
Attemptingtosetasamplelowerthan100dwillresultina“
SAPL LO ”
error.

4. Aftersettingthesampleweight,thecommand“
READY ”willbe
displayed.Removethesampleandplacetheobjectonthepan.



5. Thescalewillexpresstheweightoftheobjectasapercentageofthe
storedsample.


59

Note:Tochangetheinitialsamplepress“CLR”andrepeatSteps1to3.
Ifthesamesampleweightisused,thescalecanbetaredwithout
clearingthefunctionandnewobjectscanbeweighed.


1. ToexitPercentWeighing,pressthe“C”key.



SAPL ON
READY
50
100.000