Toro 03200 Reelmaster 3100-D User manual

Operator’s Manual
Reelmaster® 3100-D Traction Unit
Model—Serial Range
03170—415300000 and Up
03171—415400000 and Up
3466-297A Original Instructions (EN) *3466-297*A

Disclaimers and Regulatory Information
This product complies with all relevant European directives; for details, please see the
separate product specific Declaration of Conformity (DOC) sheet.
It is a violation of California Public Resource Code Section 4442 or 4443 to use or operate
the engine on any forest-covered, brush-covered, or grass-covered land unless the engine
is equipped with a spark arrester, as defined in Section 4442, maintained in effective
working order, or the engine is constructed, equipped, and maintained for the prevention of
fire.
The enclosed engine owner's manual is supplied for information regarding the US
Environmental Protection Agency (EPA) and the California Emission Control Regulation of
emission systems, maintenance, and warranty. Replacements may be ordered through the
engine manufacturer.
WARNING
CALIFORNIA
Proposition 65
Diesel engine exhaust and some of its constituents are known to the State of California to cause
cancer, birth defects, and other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and reproductive harm. Wash hands after
handling.
Use of this product may cause exposure to chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Table of Contents
Disclaimers and Regulatory Information.............................................................................................. 2
Chapter 1: Introduction........................................................................................................................ 1–1
Intended Use ..................................................................................................................................... 1–1
Getting Help....................................................................................................................................... 1–1
Manual Conventions........................................................................................................................ 1–2
Safety Alert Classifications......................................................................................................... 1–2
Chapter 2: Safety.................................................................................................................................. 2–1
General Safety .................................................................................................................................. 2–1
Before Operation Safety ................................................................................................................. 2–1
Fuel Safety ..................................................................................................................................... 2–2
During Operation Safety ................................................................................................................. 2–2
Rollover Protection System (ROPS) Safety........................................................................... 2–3
Slope Safety .................................................................................................................................. 2–3
After Operation Safety..................................................................................................................... 2–4
Maintenance Safety ......................................................................................................................... 2–5
Engine Safety ................................................................................................................................ 2–5
Electrical System Safety............................................................................................................. 2–5
© 2023—The Toro®Company
8111 Lyndale Ave So
Bloomington, MN 55044
Contact us at www.Toro.com
Printed in the USA
All rights reserved

Cooling System Safety................................................................................................................ 2–5
Hydraulic System Safety............................................................................................................. 2–6
Blade Safety .................................................................................................................................. 2–6
Storage Safety .................................................................................................................................. 2–6
Safety and Instructional Decals .................................................................................................... 2–7
Chapter 3: Setup................................................................................................................................... 3–1
1 Installing the Wheels .................................................................................................................... 3–1
2 Installing the Steering Wheel ..................................................................................................... 3–2
3 Charging and Connecting the Battery...................................................................................... 3–3
4 Checking the Slope Indicator ..................................................................................................... 3–4
5 Installing the Roll Bar ................................................................................................................... 3–5
6 Installing the Front Lift Arms....................................................................................................... 3–6
Preparing to Install the Lift Arms............................................................................................... 3–6
Assembling the Lift Arms to the Machine ............................................................................... 3–6
Assembling the Lift Cylinder to the Left Lift Arm ................................................................... 3–7
Assembling the Lift Cylinder to the Right Lift Arm ................................................................ 3–7
7 Installing the Carrier Frames to the Cutting Units ................................................................. 3–8
Preparing the Cutting Units ........................................................................................................ 3–8
Assembling the Carrier Frames for the Front Cutting Units ............................................... 3–8
Assembling the Cutting Unit and Rear Carrier Frame ......................................................... 3–9
Assembling the Carrier Frames for the Front Cutting Units ............................................... 3–9
Assembling the Cutting Unit and Rear Carrier Frame ....................................................... 3–10
8 Installing the Cutting Units ........................................................................................................ 3–11
9 Installing the Cutting Unit Drive Motors ................................................................................. 3–12
10 Adjusting the Lift Arms............................................................................................................. 3–12
Checking Lift Arm and Rear Cutting Unit Clearance.......................................................... 3–12
Adjusting the Lift-Arm Clearance............................................................................................ 3–13
Adjusting the Lift-Arm Stop Bolts............................................................................................ 3–14
Adjusting the Rear Cutting Unit Clearance........................................................................... 3–14
11 Preparing the Machine............................................................................................................. 3–15
12 Installing the Hood Latch ........................................................................................................ 3–16
13 Installing the Exhaust Guard.................................................................................................. 3–17
14 Installing the CE Decals .......................................................................................................... 3–17
Applying the Year of Production Decal and CE Decal ....................................................... 3–18
Applying the CE Tilt Danger Decal......................................................................................... 3–18
15 Installing the Tipper Roller Kit (Optional) ............................................................................ 3–18
Chapter 4: Product Overview ............................................................................................................ 4–1
Controls............................................................................................................................................... 4–1
Key Switch ..................................................................................................................................... 4–2
Traction Pedals ............................................................................................................................. 4–2
Mow/Transport Slide.................................................................................................................... 4–2
Cutting Unit Shift Lever ............................................................................................................... 4–3
Slope Indicator .............................................................................................................................. 4–3
Indicator Slot.................................................................................................................................. 4–4
Cutting-Unit Drive Switch............................................................................................................ 4–4
Throttle............................................................................................................................................ 4–4
Lift Lever Lock ............................................................................................................................... 4–4
Parking Brake................................................................................................................................ 4–4
Oil Pressure Warning Light ........................................................................................................ 4–5
Engine Coolant Temperature Warning Light.......................................................................... 4–5
Alternator Light.............................................................................................................................. 4–5
Glow-Plug Indicator Light ........................................................................................................... 4–5
Hour Meter ..................................................................................................................................... 4–5
Mower Manifold............................................................................................................................. 4–5
3466-297 A Disclaimers and Regulatory Information:

Fuel Gauge .................................................................................................................................... 4–6
Tilt-Steering Lever ........................................................................................................................ 4–7
Seat Adjustment Lever................................................................................................................ 4–7
Specifications .................................................................................................................................... 4–8
Attachments/Accessories............................................................................................................... 4–8
Chapter 5: Operation ........................................................................................................................... 5–1
Before Operation .............................................................................................................................. 5–1
Performing Daily Maintenance.................................................................................................. 5–1
Fuel .................................................................................................................................................. 5–1
Checking the Interlock Switches............................................................................................... 5–3
During Operation .............................................................................................................................. 5–4
Starting the Engine....................................................................................................................... 5–4
Shutting Off the Engine ............................................................................................................... 5–5
Cutting Grass with the Machine ................................................................................................ 5–5
Side-Shifting the Cutting Units .................................................................................................. 5–6
Driving the Machine in Transport Mode .................................................................................. 5–7
Clip Rate (Reel Speed) ............................................................................................................... 5–8
Adjusting the Reel Speed ........................................................................................................... 5–9
Bleeding the Fuel System........................................................................................................... 5–9
Operating Tips............................................................................................................................. 5–10
After Operation................................................................................................................................ 5–11
After Mowing.................................................................................................................................... 5–11
Towing the Machine ....................................................................................................................... 5–11
Tie-Down Point Locations............................................................................................................. 5–12
Hauling the Machine ...................................................................................................................... 5–12
Chapter 6: Maintenance ..................................................................................................................... 6–1
Recommended Maintenance Schedule...................................................................................... 6–1
Daily Maintenance Checklist ......................................................................................................... 6–4
Pre-Maintenance Procedures ....................................................................................................... 6–5
Preparing for Maintenance......................................................................................................... 6–5
Lifting the Front of the Machine................................................................................................. 6–5
Lifting the Back of the Machine (Using a Hoist) .................................................................... 6–5
Lifting the Back of the Machine (Using a Jack) ..................................................................... 6–6
Removing the Battery Cover...................................................................................................... 6–6
Opening the Hood ........................................................................................................................ 6–6
Lubrication.......................................................................................................................................... 6–7
Greasing the Bearings and Bushings...................................................................................... 6–7
Grease Fitting Locations................................................................................................................. 6–8
Checking the Sealed Bearings.................................................................................................... 6–12
Engine Maintenance...................................................................................................................... 6–12
Engine Oil Specifications.......................................................................................................... 6–12
Checking the Engine-Oil Level................................................................................................ 6–13
Changing the Engine Oil and Filter ........................................................................................ 6–13
Servicing the Air Cleaner .......................................................................................................... 6–15
Fuel System Maintenance............................................................................................................ 6–16
Fuel Storage ................................................................................................................................ 6–17
Servicing the Fuel Tank............................................................................................................. 6–17
Inspecting the Fuel Lines and Connections ......................................................................... 6–17
Servicing the Fuel/Water Separator....................................................................................... 6–18
Bleeding Air from the Injectors ................................................................................................ 6–19
Electrical System Maintenance................................................................................................... 6–20
Servicing the Battery.................................................................................................................. 6–20
Servicing the Fuses ................................................................................................................... 6–22
Disclaimers and Regulatory Information: Page 4 3466-297 A

Drive System Maintenance .......................................................................................................... 6–22
Checking the Tire Pressure...................................................................................................... 6–22
Torquing the Wheel Nuts .......................................................................................................... 6–23
Adjusting the Traction Drive for Neutral ................................................................................ 6–23
Cooling System Maintenance...................................................................................................... 6–24
Coolant Specifications............................................................................................................... 6–24
Checking the Coolant Level ..................................................................................................... 6–25
Cleaning the Engine Cooling System .................................................................................... 6–26
Brake Maintenance ........................................................................................................................ 6–26
Adjusting the Parking Brake..................................................................................................... 6–26
Belt Maintenance............................................................................................................................ 6–27
Servicing the Engine Belts ....................................................................................................... 6–27
Controls Maintenance ................................................................................................................... 6–28
Adjusting Mow Ground Speed................................................................................................. 6–28
Adjusting the Throttle................................................................................................................. 6–29
Hydraulic System Maintenance .................................................................................................. 6–29
Hydraulic Fluid Specifications ................................................................................................. 6–29
Checking the Hydraulic-Fluid Level ....................................................................................... 6–30
Inspecting the Hydraulic Lines and Hoses ........................................................................... 6–31
Changing the Hydraulic Fluid .................................................................................................. 6–31
Changing the Hydraulic Filter .................................................................................................. 6–33
Cutting Unit Maintenance ............................................................................................................. 6–33
Checking the Reel-to-Bedknife Contact................................................................................ 6–33
Backlapping the Cutting Units ................................................................................................. 6–34
Chassis Maintenance .................................................................................................................... 6–36
Inspecting the Seat Belt ............................................................................................................ 6–36
Cleaning............................................................................................................................................ 6–36
Washing the Machine ................................................................................................................ 6–36
Chapter 7: Storage............................................................................................................................... 7–1
Storing the Machine......................................................................................................................... 7–1
Storing the Battery............................................................................................................................ 7–1
Chapter 8: Troubleshooting ............................................................................................................... 8–1
Using the Standard Control Module (SCM)................................................................................ 8–1
Troubleshooting the Standard Control Module (SCM) ........................................................ 8–2
The Toro Warranty
California Proposition 65 Warning Information
3466-297 A Disclaimers and Regulatory Information:

Chapter 1
Introduction
Intended Use
This machine is a ride-on, reel-blade lawn mower intended to be used by professional, hired
operators in commercial applications. It is primarily designed for cutting grass on well-
maintained turf. Using this product for purposes other than its intended use could prove
dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly
and to avoid injury and product damage. You are responsible for operating the product
properly and safely.
Getting Help
G403686
Visit www.Toro.com for product safety and
operation training materials, accessory
information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your product
ready. These numbers are located on the serial
plate on your product . Write the numbers in the
space provided.
IMPORTANT
With your mobile device, you can scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other product information.
Model
Number:
Serial
Number:
Introduction Page 1–1 3466-297 A

Manual Conventions
This manual identifies potential hazards and has safety messages identified by the safety-
alert symbol, which signals a hazard that may cause serious injury or death if you do not
follow the recommended precautions.
G405934
This manual uses 2 words to highlight information. Important calls attention to special
mechanical information and Note emphasizes general information worthy of special
attention.
Safety Alert Classifications
The safety-alert symbol shown in this manual and on the machine identifies important safety
messages that you must follow to prevent accidents.
Safety-alert symbol appears above information that alerts you to unsafe actions or situations
and is followed by the word DANGER,WARNING, or CAUTION.
DANGER
Danger indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
Warning indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
3466-297A Page 1–2 Introduction: Manual Conventions

Chapter 2
Safety
General Safety
• This product is capable of amputating hands and feet and of throwing objects.
• Read and understand the contents of this Operator’s Manual before starting the engine.
• Use your full attention while operating the machine. Do not engage in any activity that
causes distractions; otherwise, injury or property damage may occur.
• Do not put your hands or feet near moving components of the machine.
• Do not operate the machine without all guards and other safety protective devices in
place and functioning properly on the machine.
• Keep bystanders and children out of the operating area. Never allow children to operate
the machine.
• Shut off the engine, remove the key, and wait for all movement to stop before you leave
the operator’s position. Allow the machine to cool before adjusting, servicing, cleaning, or
storing it.
Improperly using or maintaining this machine can result in injury. To reduce the potential for
injury, comply with these safety instructions and always pay attention to the safety-alert
symbol , which means Caution,Warning, or Danger—personal safety instruction. Failure
to comply with these instructions may result in personal injury or death.
Before Operation Safety
• Never allow children or untrained people to operate or service the machine. Local
regulations may restrict the age of the operator. The owner is responsible for training all
operators and mechanics.
• Become familiar with the safe operation of the machine, operator controls, and safety
signs.
• Before you leave the operator’s position, do the following:.
– Park the machine on a level surface
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• Know how to stop the machine and shut off the engine quickly.
• Do not operate the machine without all guards and other safety protective devices in
place and functioning properly on the machine.
Safety Page 2–1 3466-297 A

• Before mowing, always inspect the machine to ensure that the cutting units are in good
working condition.
• Inspect the area where you will use the machine and remove all objects that the machine
could throw.
• This product generates an electromagnetic field. If you wear an implantable electronic
medical device, consult your health care professional before using this product.
Fuel Safety
• Use extreme care in handling fuel. It is flammable and its vapors are explosive.
• Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
• Use only an approved fuel container.
• Do not remove the fuel cap or fill the fuel tank while the engine is running or hot.
• Do not add or drain fuel in an enclosed space.
• Do not store the machine or fuel container where there is an open flame, spark, or pilot
light, such as on a water heater or other appliance.
• If you spill fuel, do not attempt to start the engine; avoid creating any source of ignition
until the fuel vapors have dissipated.
During Operation Safety
• The owner/operator can prevent and is responsible for accidents that may cause
personal injury or property damage.
• Wear appropriate clothing, including eye protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long hair and do not wear loose clothing or
loose jewelry.
• Do not operate the machine while ill, tired, or under the influence of alcohol or drugs.
• Use your full attention while operating the machine. Do not engage in any activity that
causes distractions; otherwise, injury or property damage may occur.
• Before you start the engine, ensure that all drives are in neutral, the parking brake is
engaged, and you are in the operating position.
• Do not carry passengers on the machine and keep bystanders and children out of the
operating area.
• Operate the machine only in good visibility to avoid holes or hidden hazards.
• Avoid mowing on wet grass. Reduced traction could cause the machine to slide.
• Keep your hands and feet away from the cutting units.
• Look behind and down before backing up to be sure of a clear path.
• Use care when approaching blind corners, shrubs, trees, or other objects that may
obscure your vision.
• Stop the cutting units whenever you are not mowing.
• Slow down and use caution when making turns and crossing roads and sidewalks with
the machine. Always yield the right-of-way.
3466-297A Page 2–2 Safety: During Operation Safety

• Operate the engine only in well-ventilated areas. Exhaust gasses contain carbon
monoxide, which is lethal if inhaled.
• Do not leave a running machine unattended.
• Before you leave the operator’s position, do the following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• Operate the machine only in good visibility and appropriate weather conditions. Do not
operate the machine when there is the risk of lightning.
• Use the cruise control (if equipped) only when you can operate the machine in an open,
flat area that is free from obstacles and where the machine can move at a constant
speed without interruption.
Rollover Protection System (ROPS) Safety
• Do not remove any of the ROPS components from the machine.
• Ensure that the seat belt is attached and that you can release it quickly in an emergency.
• Always wear your seat belt.
• Check carefully for overhead obstructions and do not contact them.
• Keep the ROPS in safe operating condition by thoroughly inspecting it periodically for
damage and keeping all the mounting fasteners tight.
• Replace all damaged ROPS components. Do not repair or alter them.
Slope Safety
• Slopes are a major factor related to loss of control and rollover accidents, which can
result in severe injury or death. You are responsible for safe slope operation. Operating
the machine on any slope requires extra caution.
• Evaluate the site conditions to determine if the slope is safe for machine operation,
including surveying the site. Always use common sense and good judgment when
performing this survey.
• Review the slope instructions, listed below, for operating the machine on slopes. Before
you operate the machine, review the site conditions to determine whether you can
operate the machine in the conditions on that day and at that site. Changes in the terrain
can result in a change in slope operation for the machine.
– Avoid starting, stopping, or turning the machine on slopes. Avoid making sudden
changes in speed or direction. Make turns slowly and gradually.
– Do not operate a machine under any conditions where traction, steering, or stability is
in question.
Safety: During Operation Safety Page 2–3 3466-297 A

Slope Safety (continued)
– Remove or mark obstructions such as ditches, holes, ruts, bumps, rocks, or other
hidden hazards. Tall grass can hide obstructions. Uneven terrain could overturn the
machine.
– Be aware that operating the machine on wet grass, across slopes, or downhill may
cause the machine to lose traction.
– Use extreme caution when operating the machine near drop-offs, ditches,
embankments, water hazards, or other hazards. The machine could suddenly roll
over if a wheel goes over the edge or the edge caves in. Establish a safety area
between the machine and any hazard.
– Identify hazards at the base of the slope. If there are hazards, mow the slope with a
pedestrian-controlled machine.
– If possible, keep the cutting units lowered to the ground while operating on slopes.
Raising the cutting units while operating on slopes can cause the machine to become
unstable.
This triplex mower has a unique drive system for superior traction on hills. The uphill wheel
does not spin out and limit traction like conventional triplex mowers. If you operate the
machine on a side hill that is too steep, rollover will occur before losing traction.
• When possible, mow up and down a hill rather than across it.
• On side hills, shift the cutting units uphill (if equipped).
• If the tires lose traction, disengage the blade(s) and proceed slowly straight down the
slope.
• If you must turn, turn slowly and gradually downhill, if possible.
After Operation Safety
• Park the machine on a level surface.
• Disengage and lower the cutting units
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all movement to stop.
• Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• To help prevent fires, ensure that the cutting units, drives, mufflers, cooling screens, and
engine compartment are free from grass and debris buildup. Clean up oil or fuel spills.
• Disengage the drive to the attachment whenever you are hauling or not using the
machine.
• Maintain and clean the seat belt(s) as necessary.
• Do not store the machine or fuel container where there is an open flame, spark, or pilot
light, such as on a water heater or on other appliances.
3466-297A Page 2–4 Safety: After Operation Safety

Maintenance Safety
• Before you leave the operator’s position, do the following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• Wear appropriate clothing, including eye-protection; long pants and substantial, slip-
resistant footwear. Keep hands, feet, clothing, jewelry, and long hair away from moving
parts.
• Allow machine components to cool before performing maintenance.
• If possible, do not perform maintenance while the engine is running. Keep away from
moving parts.
• Operate the engine only in well-ventilated areas. Exhaust gases contain carbon
monoxide, which is lethal if inhaled.
• Support the machine with jack stands whenever you work under the machine.
• Carefully release pressure from components with stored energy.
• Keep all parts of the machine in good working condition and all hardware tightened.
• Replace all worn or damaged decals.
• To ensure safe, optimal performance of the machine, use only genuine Toro replacement
parts. Replacement parts made by other manufacturers could be dangerous, and such
use could void the product warranty.
Engine Safety
• Shut off the engine before checking the oil or adding oil to the crankcase.
• Do not change the governor speed or overspeed the engine.
Electrical System Safety
• Disconnect the battery before repairing the machine. Disconnect the negative terminal
first and the positive last. Connect the positive terminal first and the negative last.
• Charge the battery in an open, well-ventilated area, away from sparks and flames.
Unplug the charger before connecting or disconnecting the battery. Wear protective
clothing and use insulated tools.
Cooling System Safety
• Swallowing engine coolant can cause poisoning; keep out of reach from children and
pets.
Safety: Maintenance Safety Page 2–5 3466-297 A

Cooling System Safety (continued)
• Discharge of hot, pressurized coolant or touching a hot radiator and surrounding parts
can cause severe burns.
– Always allow the engine to cool at least 15 minutes before removing the radiator cap.
– Use a rag when opening the radiator cap, and open the cap slowly to allow steam to
escape.
Hydraulic System Safety
• Seek immediate medical attention if fluid is injected into skin. Injected fluid must be
surgically removed within a few hours by a doctor.
• Ensure that all hydraulic-fluid hoses and lines are in good condition and all hydraulic
connections and fittings are tight before applying pressure to the hydraulic system.
• Keep your body and hands away from pinhole leaks or nozzles that eject high-pressure
hydraulic fluid.
• Use cardboard or paper to find hydraulic leaks.
• Safely relieve all pressure in the hydraulic system before performing any work on the
hydraulic system.
Blade Safety
• A worn or damaged blade or bedknife can break, and a piece could be thrown toward
you or bystanders, resulting in serious personal injury or death.
• Inspect the blades and bedknives periodically for excessive wear or damage.
• Use care when checking the blades. Wear gloves and use caution when servicing them.
Only replace or backlap the blades and bedknives; never straighten or weld them.
• On machines with multiple cutting units, take care when rotating a cutting unit; it can
cause the reels in the other cutting units to rotate.
Storage Safety
• Before you leave the operator’s position, do the following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• Do not store the machine or fuel container where there is an open flame, spark, or pilot
light, such as on a water heater or other appliance.
3466-297A Page 2–6 Safety: Storage Safety

Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Battery Symbols
Some or all of these symbols are on your battery.
s_batterysymbols2
Explosion hazard
No fire, open flame, or smoking
Caustic liquid/chemical burn hazard
Wear eye protection.
Read the Operator’s Manual.
Keep bystanders away from the battery.
Wear eye protection; explosive gases can cause
blindness and other injuries.
Battery acid can cause blindness or severe burns.
Flush eyes immediately with water and get
medical help fast.
Contains lead; do not discard
Decal Part: 93-6681
s_decal93-6681
Cutting/dismemberment hazard,
fan—stay away from moving parts.
Decal Part: 93-7276
s_decal93-7276
Explosion hazard—wear eye
protection.
Caustic liquid/chemical burn
hazard—to perform first aid, flush with
water.
Fire hazard—no fire, open flames,
or smoking.
Poison hazard—keep children
away from the battery.
Decal Part: 94-3353
s_decal94-3353
Crushing hazard of hand—keep
hands away.
Safety: Safety and Instructional Decals Page 2–7 3466-297 A

Decal Part: 99-3444
s_decal99-3444
Transport speed—fast
Mowing speed—slow
Decal Part: 106-9290
Model 03170
s_decal106-9290
Neutral
Parking brake—Off
PTO
In seat
High temperature shutdown
Reels—active
High temperature warning
Inputs
Outputs
Power
Engine—Start
Engine—Run
Engine—Start
PTO
Decal Part: 117-3270
s_decal117-3270
Warning—do not touch the hot
surface.
Cutting/dismemberment hazard,
hand; entanglement hazard, belt—stay
away from moving parts, keep all
guards and shields in place.
3466-297A Page 2–8 Safety: Safety and Instructional Decals

Decal Part: 121-3598
CE Machines
s_decal121-3598
Tipping hazard—do not drive
across slopes greater than 17°.
Note: This machine complies with the industry standard stability test in the static lateral and
longitudinal tests with the maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator’s Manual as well as the
conditions in which you would operate the machine to determine whether you can operate
the machine in the conditions on that day and at that site. Changes in the terrain can result
in a change in slope operation for the machine. If possible, keep the cutting units lowered to
the ground while operating the machine on slopes. Raising the cutting units while operating
on slopes can cause the machine to become unstable.
Safety: Safety and Instructional Decals Page 2–9 3466-297 A

Decal Part: 121-3623
s_decal121-3623
Warning—read the Operator's Manual; do not
operate the machine unless you have received
training.
Warning—read the Operator's Manual before
towing the machine.
Tipping hazard—slow the machine before turning;
when driving on slopes, keep the cutting units
lowered and your seatbelt fastened.
Warning—do not park on slopes; engage the
parking brake, stop the cutting units, lower the
attachments, shut off the engine, and remove the
key from the ignition before leaving the machine.
Thrown object hazard—keep bystanders away.
Warning—wear hearing protection.
Entanglement hazard—keep away from moving
parts; keep all guards and shields in place.
Decal Part: 121-3628
s_decal121-3628
Tipping hazard—do not drive
across slopes greater than 25°.
Note: This machine complies with the industry standard stability test in the static lateral and
longitudinal tests with the maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator’s Manual as well as the
conditions in which you would operate the machine to determine whether you can operate
the machine in the conditions on that day and at that site. Changes in the terrain can result
in a change in slope operation for the machine. If possible, keep the cutting units lowered to
the ground while operating the machine on slopes. Raising the cutting units while operating
on slopes can cause the machine to become unstable.
3466-297A Page 2–10 Safety: Safety and Instructional Decals

Decal Part: 125-6688
s_decal125-6688
Explosion hazard—Read the
Operator’s Manual; Do not use starting
fluid.
Decal Part: 133-8062
s_decal133-8062
Safety: Safety and Instructional Decals Page 2–11 3466-297 A

Decal Part: 136-3678
Model 03170
s_decal136-3678
PTO—Disengage
PTO—Engage
Lower the cutting units.
Raise the cutting units.
Lock
Engine—Shut off
Engine—Run
Engine—Start
Lights
Fast
Slow
Decal Part: 136-3679
Model 03171
s_decal136-3679
PTO—Disengage
PTO—Engage
Lower the cutting units.
Raise the cutting units.
Shift the cutting units to the right.
Shift the cutting units to the left.
Lock
Engine—Shut off
Engine—Run
Engine—Start
Lights
Fast
Slow
3466-297A Page 2–12 Safety: Safety and Instructional Decals

Decal Part: 136-3702
s_decal136-3702
Warning—Read the Operator’s
Manual; wear a seatbelt; do not remove
the roll bar.
Warning—Do not modify the roll
bar.
Decal Part: 136-3716
s_decal136-3716
Reel speed
Tire pressure
Diesel fuel
Fuel/water
separator
Engine air filter
Engine oil
Radiator screen
Engine coolant
Fuses
Engine-oil level
Belt tension
Hydraulic fluid
Parking brake
Battery
Check every 8
hours.
Read the
Operator’s Manual
for lubrication
information.
Read the
Operator’s Manual.
Fluids
Capacity
Fluid interval
(hours)
Filter interval
(hours)
Safety: Safety and Instructional Decals Page 2–13 3466-297 A