Toro Titan HD 136-1682 User manual

FormNo.3406-430RevB
TrimmerMountKit
Titan®HDSeriesRidingMower
ModelNo.136-1682
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
Nopartsrequired–Preparethemachine.
Rearbracket1
Nut(1/4inch)6
Largebackerplate1
Largestclamp1
Largest-clampbracket1
Bolt(1/4x5/8inch)2
Bolt(1/4x1-1/2inches)2
Bolt(1/4x1-1/4inches)2
Smallstclamp1
Smallbackerplate1
Carriagebolt(5/16x7/8inch)3
Smallst-clampbracket1
Trimmerplate1
Nut(5/16inch)2
Channelbracket1
Mountplate1
Knob1
Assemblethekit.
Bolt(3/8x7/8inch)2
Nut(3/8inch)2
Carriagebolt(3/8x3inches)1
Wide-angenut(3/8inch)1
Mountthekittothemachine.
Nopartsrequired–Secureatrimmertothemountassemblies.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3406-430*B

PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Movethemotion-controlleverstotheNEUTRAL-LOCKposition.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
g037289
g037289
Figure1
AssemblingtheKit
1.Assembletherearmountassembly(Figure2).
Note:Mountthelargest-clampbracketin1ofthe
3holestoallowclearancebetweenthetrimmerengine
andthemachinewhenthetrimmerismounted.
g038078
Figure2
1.Rearbracket5.Largest-clampbracket
2.Nut(1/4inch)6.Bolt(1/4x5/8inch)
3.Largebackerplate7.Bolt(1/4x1-1/2inches)
4.Largestclamp
2.AssemblethefrontmountassemblyasshowninFigure
3orFigure4.
2

g038080
Figure3
AssemblyforTrimmerswithaStraightShaft
1.Knob6.Nut(1/4inch)
2.Mountplate7.Carriagebolt(5/16x7/8
inch)
3.Bolt(1/4x1-1/4inch)8.Trimmerplate
4.Smallstclamp9.Nut(5/16inch)
5.Smallbackerplate10.Channelbracket
g038091
Figure4
AssemblyforTrimmerswithaCurvedShaft
1.Knob7.Smallstclamp
2.Mountplate8.Smallbackerplate
3.Trimmerplate9.Bolt(1/4x1-1/4inch)
4.Carriagebolt(5/16x7/8
inch)
10.Channelbracket
5.Nut(1/4inch)11.Nut(5/16inch)
6.Bolt(1/4x5/8inch)
3

MountingtheKittothe
Machine
1.Installtherearmountassemblytotherightsidepanel
onthemachineusing2bolts(3/8x7/8inch)and2
nuts(3/8inch)asshowninFigure5.
Note:Usethe2frontholesifyouaremountinga
curvedtrimmer.
g038084
Figure5
1.Bolt(3/8x7/8inch)3.Nut(3/8inch)
2.Rearmountassembly4.Usetheseholesifyou
aremountingacurved
trimmer.
2.Installthefrontmountassemblyovertheframe,near
therightcasterwheel,usingthewide-angenut(3/8
inch)andcarriagebolt(3/8x3inches)asshownin
Figure6.
g038085
Figure6
1.Wide-angenut(3/8inch)3.Carriagebolt(3/8x3
inches)
2.Frontmountassembly
4

SecuringaTrimmertothe
MountAssemblies
1.Securetherearendofthetrimmertotherearmount
assemblyusingthelargestclamp.
2.Loosentheboltssecuringthemountplatetothe
channelbracketinthefrontmountassembly(Figure7).
g038088
Figure7
1.Knob3.Trimmerplate
2.Mountplate
3.Pivottheplatesothatthesmallstclamplinesupwith
thetrimmer.Tightenthebolts.
4.Loosentheknobandraiseorlowerthetrimmerplate
asnecessary(Figure7).Tightentheknob.
5.Securethefrontendofthetrimmertothefrontmount
assemblyusingthestclamp.
5

Notes:

Notes: