Toshiba E-STUDIO202S Setup guide

Start
Online Manual
e-STUDIO202S

Contents
How to Use the Online Manual 1
Printing Overview 2
Basic Printing 3
Starting the Printer Driver Using the "Start" Button 4
Printer Driver Settings 5
Printing a Watermark 6
Fitting the Printed Image to the Paper 7
Printing Multiple Pages on One Page 8
Outline of the Print Status Window 9
Scanning Overview 10
Scanning an Image from a TWAIN-Compliant Application 11
Scanning an Image from a WIA-Compliant
Application (Windows XP/Vista) 15
Scanning an Image from the "Scanner and
Camera Wizard" (Windows XP) 17
Outline of Button Manager 20
Button Manager Settings 21
Identifying Unit Problems 22
Check the Connection between the Unit and Computer 23
Check Your Computer 24
Plug and Play Screen does not Appear 25
Failed to Install the Driver (Windows 2000/XP) 26
Faint, Uneven or Smeared Print Output 27
Characters or Graphics are not Printed in Correct Position 28
Nothing Prints 29
Poor Scanning Result 30
The Scanned Image is Incorrectly Positioned 31
Unable to Scan the Image 32
Uninstalling the Software 33
Printer Driver Features 34
1
How to Use the Online Manual
2
Print
3
Scan
4
Troubleshooting
5
Printer Driver Features
6
Index
Trademark Acknowledgments
• Microsoft®, Windows®, Windows® 98, Windows® Me, Windows®
2000, Windows® XP, Windows Vista® and Internet Explorer® are
registered trademarks or trademarks of Microsoft Corporation in the
U.S.A. and other countries.
• Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Reader
are registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and other countries.
• All other trademarks and copyrights are the property of their
respective owners.

INDEX
CONTENTS 1
This Online Manual provides instruction for the operation of your new unit. Please read the following explanation of how
to use the Online Manual, and then search for the information that you need.
For more information about computers, operating systems and Acrobat Reader, please refer to the relevant manual or
help file.
How to Control the Online Manual
Following links
Links can connect parts of a document to other parts for further information. In this document, green colored letters are linked areas.
To follow a link, select a hand tool ( ), a zoom tool or a selection tool. Position the pointer over the linked area on the page until the pointer
changes to a hand with a pointing finger ( ). Then click the link.
Using Bookmarks
This online manual has Bookmarks on the main pages of each section. You can move to the desired pages by simply clicking its bookmark.
How to Print Out the Online Manual
I
n order to print out a hard copy of the Online Manual for your reference, go to Acrobat Reader, click the "File" menu, and
select "Print". After specifying the printer setting, click the "OK" button to print.
Note
zIn this online manual, screen images and operating procedures are mainly for Windows XP. With other versions
of Windows, some screen images may be different from those in this manual.
zWherever "e-STUDIOXXXX" appears in this manual, please substitute your model name for "xxxx".
zFor your information, please note that the ADF and the second cassette are provided as an option.
1
INDEX
CONTENTS
Click this button to display the Table of
Contents of the Online Manual. From the Table
of Contents you can jump to various pages.
Click this button to display the Index of the
Online Manual. From the Index you can
jump to various pages.
Takes you forward page by page.
Takes you back page by page. To return to the previous link,
click the ( ) button on the menu bar of the Acrobat Reader.
How to Use the Online Manual
1

INDEX
CONTENTS 2
2
The flow chart shown below provides printing overview.
Reference: For more information on printing, see Basic Printing.
Caution
zWhen the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting
printing.
zEnsure printing has been completed before turning the power off. Do not remove the power cord before turning
the unit off.
Prepare the document you intend to print
Send print data from your computer
Printing
Exit printing
Open the printer driver setup screen and set the print preferences
Reference:
Printer Driver Settings, Printing a Watermark, Fitting the Printed Image to the Paper,
Printing Multiple Pages on One Page
Printing Overview

INDEX
CONTENTS 3
2
This is a printing example using WordPad to print a document onto Letter size paper.
1Start WordPad, make a new file, and enter the text
you intend to print.
2Select "Print" from the application's "File" menu.
3Make sure that "TOSHIBA e-STUDIOXXXX" is
selected as the current printer. If you intend to
change any print setting, click the "Preferences"
button to open the printer driver setup screen.
On Windows 98/Me, click the "Properties" button.
Reference: Printer Driver Settings, Printing a Watermark, Fitting the
Printed Image to the Paper, Printing Multiple Pages on
One Page
4Click the "Print" button in the "Print" dialog box.
On Windows 98/Me, click the "OK" button.
Printing starts according to your preferences.
Note
Windows 2000 does not have the "Preferences"
button on this dialog box. Switch to the desired
tab by clicking it to specify printer settings.
TOSHIBA
e-STUDIOXXX
X
TOSHIBA
e-STUDIOXXX
X
Basic Printing

INDEX
CONTENTS 4
2
You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted
in this way will be the initial settings when you print from an application. (If you change the settings from the printer
driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.)
Reference: Basic Printing
Windows 2000/XP/Vista
1Click the "start" button, and then click "Control
Panel".
On Windows 2000, click the "Start" button and select
"Settings".
2Click "Printers and Other Hardware", and then click
"Printers and Faxes".
• On Windows Vista, click "Printer".
• On Windows 2000, click "Printers".
3Click the "TOSHIBA e-STUDIOXXXX" printer driver
icon and select "Properties" from the "File" menu.
On Windows Vista, click "Printer".
4Click the "Printing Preferences" button in the
"General" tab.
The printer driver setup screen will appear.
Reference: Printer Driver Settings
Windows 98/Me
1Click the "Start" button, select "Settings" and then
click "Printers".
2Click the "TOSHIBA e-STUDIOXXXX" printer driver
icon and select "Properties" from the "File" menu.
3Click the "Setup" tab.
The printer driver setup screen will appear.
Reference: Printer Driver Settings
Starting the Printer Driver Using the "Start" Button

INDEX
CONTENTS 5
2
To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting.
Tab
Index which allows you to
switch between the various
setup screens.
( ) button
Click this button and then click a
setting to view Help for the setting.
Check button
Allows you to select one
item from a list of options.
"OK" button
Click this button to save
your settings, and exit the
dialog box.
The settings you made at
"N-Up Printing", "Document
Style", "Fit To Paper Size",
"Image Orientation" and
"Watermark" are shown in
this image.
The tray selected in
"Paper Selection" in the
"Paper" tab appears in
blue. You can also click
on a tray to select it.
"Cancel" button
Click this button to exit the dialog
box without making any changes to
the settings.
"Apply" button
Click to save your settings
without closing the dialog box.
"Help" button
The Help window will open to
let you view explanations of the
settings on the tab.
Drop-down list
Allows you to make one
selection from a list of choices.
Check box
Click this option to activate/
deactivate each function.
You can also view Help by
right-clicking the setting
with the mouse.
The "Apply" button does
not appear when you
open this window from
an application.
Note
Note
Printer Driver Settings

INDEX
CONTENTS 6
2
To print a watermark, for example "CONFIDENTIAL", on your document, refer to the following steps. Open the printer
driver and click the "Watermarks" tab.
Reference: See Basic Printing for details on how to open the printer driver.
How to Print a Watermark
From the "Watermark" drop-down list, select the watermark, for example "CONFIDENTIAL", you wish to print on your
document, and start printing.
For details on watermark settings, view printer driver Help.
Reference: Printer Driver Settings
Print sample
Printing a Watermark

INDEX
CONTENTS 7
2
This printer driver can adjust the zoom ratio for printing according to the paper loaded in the unit.
Follow the steps shown below to use this function. The instruction below assumes that you intend to print a Letter or A4
size document onto an Invoice or B5.
1Click the "Paper" tab in the printer driver setup
screen.
2Select the paper size for the print data from "Paper
Size".
3Check the "Fit To Page" box.
4Select the paper size for "Fit To Paper Size", which
corresponds to the size of paper in the unit.
Now, the printed image will automatically fit the paper
set in the unit.
Note
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Reference: Printing Multiple Pages on One Page
Paper Size: Letter or A4
Fit To Paper Size: Invoice or B5
Letter or A4 size document
(Paper Size)
Invoice or B5 size paper
(Fit To Paper Size)
Fitting the Printed Image to the Paper

INDEX
CONTENTS 8
2
This feature allows you to print two or four document pages onto a single page.
To use this function, open the printer driver setup screen, select "2-Up" or "4-Up" for "N-Up Printing" on the "Main" tab.
If you select the "Border" checkbox, border lines will be printed on each page.
Note
The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected.
Reference: Fitting the Printed Image to the Paper
"2-Up"
"4-Up"
BorderBorderN-Up
Printing Multiple Pages on One Page