Toshiba 43 QF5D Series User manual
OPERATING INSTRUCTIONS
43/50/55/65 UF3D Series
43/50/55/65 QF5D Series
English - 1 -
Table of Contents
Safety Information .................................................2
Introduction............................................................4
Features ................................................................4
Stand Installation & Wall Mounting........................4
Antenna Connection..............................................5
Other Connections.................................................6
...........................................7
.........................................7
Remote Control ....................................................9
................................................10
Main Screen ..........................................................11
..................................................................12
Settings..................................................................14
.......................................25
Channel Guide.......................................................25
Connecting to the Internet .....................................25
...............27
Licences ................................................................28
..............................................29
REACH information ...............................................30
EU Conformity Statement......................................30
English - 2 -
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
Note: Follow the on screen instructions for operating the
related features.
mains.
IMPORTANT - Please read these in-
structions fully before installing or
operating
WARNING: This device is intended to be
used by persons (including children) who are
capable / experienced of operating such a device
unsupervised, unless they have been given
supervision or instruction concerning the use of
the device by a person responsible for their safety.
not
animals.
WARNING
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the TV.
Caution
Maintenance
Mains Supply
Markings on the Product
instructions.
Note
such information for security reasons.
Class II Equipment:
a safety connection to electrical earth.
Hazardous Live Terminal:
i
Caution, See Operating Instructions: The
English - 3 -
CLASS 1
LASER PRODUCT
Class 1 Laser Product: This
source that is safe under rea-
-
WARNING
to death.
children.
medical attention.
– – – – – – – – – – – –
television set.
television set.
ALWAYS ensure the television set is not overhanging
its controls.
of the television or furniture on which the television
– – – – – – – – – – – –
WALL MOUNTING WARNINGS
the wall.
wall.
accessories.
a sign of a malfunction.
without notice.
English - 4 -
Introduction
Features
Ultra HD (UHD)
High Dynamic Range (HDR) / Hybrid Log-
Gamma (HLG)
Home > Settings > Display
& Audio > Picture SettingsSelect
HDMI Input Mode
Advanced Settings menu as Mode 2
(2.0) or Auto
the HDR/HLG content is received through an HDMI
Dolby Vision
-
-
Home > Settings
> Display & Audio > Picture Settings menu and
SelectHDMI
Input ModeAdvanced Settings menu
as Mode 2 (2.0) or Auto
Picture
Mode-
Dolby Vision
Bright and Dolby Vision Dark
change the Picture Mode
Home
and go to Picture
Picture menu and set the Picture Mode.
Stand Installation &
Wall Mounting
Assembling / Removing the stand
Preparations
Assembling the stand
1.
2.
Removing the stand from the TV
When using the wall mount bracket
English - 5 -
Antenna Connection
Left side of the TV
ANT
English - 6 -
Other Connections
Connector Type Cables Device
HDMI
Connection
(side&back)
SPDIF
(Optical Out)
Connection
(back)
Headphone
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Ethernet
Connection
(back)
When using the wall mounting kit
(contact your dealer to purchase one,
if not supplied), we recommend that
you plug all your cables into the back
of the TV before mounting on the
wall. Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the module
instruction manual for details of the
settings. The USB inputs on the
TV support devices up to 500mA.
Connecting devices that have current
value above 500mA may damage
your TV. When connecting equip-
ment using a HDMI cable to your
TV, to guarantee sucient immunity
against parasitic frequency radiation
and trouble-free transmission of high
denition signals, such as 4K con-
tent, you have to use a high speed
shielded (high grade) HDMI cable
with ferrites.
English - 7 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
mains.
Note: The position of the power cord inlet may dier depending
on the model.
To switch on the TV from standby
Standby
To switch the TV into standby
Standby
on the Inputs
until the Power O
To switch o the TV
TV Control & Operation
Note: The position of the control button may dier depending
on the model.
Operating with the Control Button
To turn the TV o:
Inputs
the Power O
To turn on the TV:
will turn on.
To change volume:
consecutively to move the focus to Volume Up or
Volume Down
increase or decrease the volume.
To change channel (in Live TV mode):
focus to Channel Up or Channel Down
channel in the channel list.
To change input:
Inputs
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
English - 8 -
Operation with the Remote Control
Home
Home
Select
Return/
Back
Input Selection
Once you have connected external systems to your
and hold the Home
highlight the Inputs Select
Select
the Inputs
Select.
Changing Channels and Volume
Volume
+/-
Programme +/-
English - 9 -
Remote Control
1
2
6
5
9
11
15
12
10
18
19
8
7
20
21
22
3
4
23
24
25
26
27
13 17
16
14
Inserting the Batteries into the Remote
AAA
To pair remote with the TV
the Remotes & Bluetooth Devices section for de-
1. Standby:
2. Voice button:
3. Up Directional button (*)
4. Left Directional button (*)
5. Home:
6. Back/Return:
Teletext
Home
7. Play/Pause
Pause:
Play:
8. Rewind:
9. Volume +/-: Increases/decreases the volume level
10. Mute:
11. Numeric buttons:
12. Subtitle:
13. Prime Video:
14. Disney+:
15. Coloured Buttons:Follow the on-screen instructions for
16. Apps:
17. Netix:
18. Text:
19. Programme +/-:
20. Guide:
21. Fast forward: Moves frames forward in media such as
movies
22. Options:
23. Down Directional button (*)
24. Right Directional button (*)
25. Select:
26. Alexa LED:
27. Microphone opening:
using Alexa or voice search.
(*) Directional buttons: Navigates menus, setting options,
moves the focus or cursor etc. Follow the on-screen
instructions.
English - 10 -
Initial Setup Wizard
Note: Follow the on-screen instructions to complete the initial
setup process. Use the directional buttons and the Select
button on the remote to select, set, conrm and proceed.
28. Choose Your Location
Select your LocationSelect
to continue.
29. Choose Your Language
screen. Select the desired language from the list and
Select to continue.
30. Select TV Mode
Store Use
is intended only for store use. It is recommended to
select Continue for home use.
31. Pair Your Remote with your TV
32. Connect to your network
EnableSelect
Select to
connect to it.
Settings > Network menu.
Refer to the Network and Connecting to the Internet
Fast
Forward
33. Sign In with Your Amazon Account
New to Amazon? Create an Account
Fast Forward
Highlight Do this laterSelect to continue.
Select
ContinueSelect
YesSelect
No
34. Restore Fire TV
can choose to use the settings from that device for
Skip
Select.
Restore
Select
Select
35. Parental Controls
can do it later.
No Parental Controls
allowed.
If you choose the Enable Parental Controls
Select to continue.
later using the Parental Controls
Settings > Preferences menu.
36. Prime Video
English - 11 -
Select
37. Welcome to Fire TV
Select to continue.
38. Scan for TV channels
Yes
SelectNo
Select
Select
39. Channel Type
Cable/Terrestrial and Satellite
If the Cable/Terrestrial
Select the transmission method on the next screen and
Select to start search.
If the Satellite
Select
YesSelect to continue
Satellite Connection
the Customised Channel List
Select
If you select the Complete Channel Scan or
Manual Channel Scan
Satellite
Connection LNB
TypeLNB PowerDiSEqC VersionSingle Cable
ToneBurst Scan Mode
When you set the DiSEqC VersionPort
version. If you select Manual Channel Scan
FrequencyPolarisation
and Symbol Rate
scan starts.
Play/Pause
Select
YesSelect to cancel.
Channel Scan
Complete
DoneSelect
Select.
Live
Aerial
or Satellite Inputs row in the
Select to
start watching.
Main Screen
modem/router. Refer to the Network and Connecting
to the Internet sections for further information on how
Home
screen. From the main screen you can start any
ProlesInputsFindHome My StuLiveApp
PeeksMy Apps and Settings
Select
English - 12 -
Home
You can use the Find
word to start a search. You can use the My Stu
or the Library under the Find to see your
Live TV
the Live
from the On Now row in the Home
Aerial or SatelliteInputs row in
the InputsSelect
to start watching.
On
Now
Adjusting the Picture Settings
Settings
the Home
Accessing Picture Settings via Settings Menu
HomeSettings
Display & AudioSelect
Highlight the Picture Settings
Select
Select
The Picture Settings
hand side of the screen.
Accessing Picture Settings while watching the TV
Home
of the screen. Scroll down and highlight Picture then
Select
on the right hand side of the screen.
Picture Menu Content
Picture Mode:
StandardVividSportFilm
and Game
Auto Backlight: OLow
MediumHigh.
Brightness:
Contrast:
Colour:
Sharpness:
is from 0-20.
Colour Temperature:
UserCoolStandardWarm
When selected each of these settings has individual
Picture Format:
AutomaticSuperzoom4:3Film Expand 14:9Film
Expand 16:9Wide Screen and Full.
Advanced Settings
Hue:
Gamma: Choose from MiddleBright (standard)
or Dark (lm). Highlight your desired setting then
Select.
Motion Processing: OLowMedium and High
Select.
De-contour:
resolution content and auto streaming services.
Choose from OLowMiddle and High. Highlight
Select.
Gamut Mapping: Highlight Gamut Mapping and
Select. O and Auto
Select.
Colour Tuner:
EnableOn or O. Then
Hue Saturation Brightness Oset
Gain.
11-Point White Balance Correction: Sets white
Enable On or O. Then
Gain Red Green Blue
English - 13 -
Select
Dynamic Noise Reduction: Dynamic Noise
OLowMedium
StrongAuto. Highlight your desired setting then
Select.
MPEG Noise Reduction:
OLowMediumStrong.
Select.
Adaptive Luma Control:
O
Low Medium Strong. Highlight your desired
Select.
Local Contrast Control: Divides each frame to
curves for every distinct region. Local Contrast
OLowMedium
High
Select.
DI Film Mode:
setting Auto and O. Highlight your desired setting
Select.
Blue Stretch:
On or O.
PC Mode:On or O.
HDMI RGB Range (HDMI input only): Sets correct
Auto Full
Limit
Select.
HDMI Input Mode (HDMI input only):
Mode 1 (1.4)Mode
2 (2.0)AutoReset. Highlight your desired setting
Select.
Dolby Vision Notication:
On or O
on as default.
Reset to Default: Resets all setting to factory default
settings.
Adjusting the Audio Settings
can access the sound settings menu via the Settings
the Home
Accessing Audio Settings via Settings Menu
HomeSettings
Display & AudioSelect
Scroll down to Audio Settings
Select
on the right hand side of the screen.
Accessing Audio Settings while watching the TV
Home
of the screen. Scroll down and highlight Sound then
Select
on the right hand side of the screen.
Audio Menu Content
Dolby Mode:
The default setting is Smart
are Film News Music Smart and O. They are
content that you are viewing. If you select Smart this
Select.
DTS Mode:
Dolby Mode
6 different setting Standard Music Film Clear
Voice, Enhanced Bass and Flat. The default setting
is Standart
Select.
Advanced Settings:
Dialogue ClarityTruVolume and DTS Virtual:X on
Select to
Balance
and Equaliser settings.
Dialogue Clarity: Enhances signal clarity for clear
TruVolume:
volume level across content.
DTS Virtual:X:
cinematic surround sound image without surround
Speaker Virtualiser:
Dolby ModeO.
OSurround Virtualiser and Dolby Atmos
Volume Leveller:
if the Dolby Mode O. Allows
OLowMid
High
Balance:
The default setting is 0.
Equaliser:
Dolby Mode
100Hz500Hz 1.5kHz5kHz
English - 14 -
10kHz
the default setting is 0 for all.
TV Speakers:Select
Reset: Resets all settings to factory defaults.
Settings
Settings
menu. You can access the Settings menu from the
Home
scroll across to Settings
Inputs
Use the Inputs
also select the Media Player from here if you have
Accessing the Inputs Menu
You can access the Inputs menu through the Settings
Home
Settings
InputsSelect.
Inputs
Home screen.
Selecting an Input
Select
Changing an Inputs Name
the OptionsChange Device Name
Select
Select. Then select Next.
Option and select
Reset Input.
Media Player
In the Inputs menu highlight Media Player
Select
highlight AllowSelect.
Your Files
VideosImages to see all images
and Audio
View
All
the screen. Highlight the View All
Options Sort
Select
can create a slide show using your images. Highlight
the Images
the OptionsOptions menu highlight
Multi-select ImagesSelect. Now select the
Select. Once
Play/Pause
Once you have a slide show running you can change
Options
AlbumSlide
StyleSlide Speed and Shue
Play/Pause
Supported le Video formats:
Supported le Picture formats:
Supported file Music formats:
Home screen to indicate that you have
Reading Notications
Highlight Notications in the Settings menu and
Select
Notications
Select
Clearing Notications
them. To clear an individual notification highlight
Options
English - 15 -
the Options menu highlight Dismiss
Select
Options
Dismiss AllSelect
Managing Notications
Manage
the Options Manage
SelectNotications setting
Settings>Applications>Appstore menu.
Select
Notication Settings
Options
No new notications
SettingsSelect to see
Do Not Interrupt
App Notications
Account & Prole
status of the account. If you have registered with
Account
& Prole Settings Amazon
Account Sign In/Up.Here you can register/deregister
content.
Amazon Account
until a new account is registered.
Highlight Amazon AccountSelect.
Then highlight Deregister Select to
Important: Deregistering an account will NOT remove
Settings
> Device & Software > Reset to Factory Defaults.
Sign In
with Your Amazon Account
so you can sign in using another account.
Sync Amazon Content
Highlight Sync Amazon ContentSelect.
Prime Video
-
Select
Parental Controls
set to OFF as default.
Highlight Parental Controls Select to
Note: You will be asked to enter a PIN to turn the parental
controls on or o. This is the Prime Video PIN and it is related
to your Amazon account. If you have forgotten your PIN follow
the link shown on the screen to reset your PIN.
Proles
account. Highlight ProlesSelect.
Prole Sharing
these settings. Highlight Prole Sharing.
Network
or the Enable Wi-Fi/Ethernet
On
Checking Network Status
Highlight Network in the Settings
Select.
show Connected
right of the screen it will show the Signal Strength
English - 16 -
and Security
Play/Pause
Back
Options
Seeing All Networks
See
All NetworksSelect. You will now see a list
Joining a Network Using WPS Button or PIN
Select
Advanced Network Settings
Join
Other Network Select. You will have
is also a more advanced setting for users that are
Saving your WLAN Password to your Amazon
Account
is O.
Highlight Save Wi-Fi Passwords to Amazon and
Select
O.
Turning on your TV via LAN and WLAN
Turn on with LAN
and Wi-FiSelect
Changing Connection Status
Highlight Enable Wi-Fi/Ethernet Select
to
to Connecting to the Internet section if you need
more information.
Basic Wi-Fi Troubleshooting Tips
Basic Wi-Fi Troubleshooting Tips and
Select.
Display & Audio
saver setting and HDMI CEC device control.
Highlight Display & Audio in the Settings menu and
Select.
Picture Settings
Customising TV Settings section of this manual.
HomePicture in
the menu on the right hand side of the screen.
Audio Settings
Customising TV
Settings section of this manual.
HomeSound in
the menu on the right hand side of the screen.
Power Controls
Power On
and Alexa Anytime.
Power On:
Highlight Power OnSelect. Highlight Home
or Last InputSelect
to your choice.
Audio Output
TV Speakers
ARC mode, Digital Audio FormatDTS DRCAC4
Dialogue Enhancer and Bluetooth Audio Sync.
Highlight Audio OutputSelect.
TV Speakers:
Highlight TV SpeakersSelect to switch the
English - 17 -
ARC mode: Highlight ARC modeSelect.
Auto ARC and eARC
Select. The
default setting is Auto.
Digital Audio Format:
Highlight Digital Audio FormatSelect.
Highlight your desired audio format PCM Dolby
DigitalPass-through and Auto Select.
The default setting is Auto.
DTS DRC:
Highlight DTS DRC Select to switch the
AC4 Dialogue Enhancer: AC-4 Dialogue Enhancer
Highlight AC4 Dialogue EnhancerSelect.
OLowMedium and High
Select. The
default setting is O.
Bluetooth Audio Sync:
might need to sync the audio to your device. Selecting
highlight Bluetooth Audio SyncSelect.
Enable Display Mirroring
device.
Highlight Enable Display MirroringSelect.
Display Mirroring
Navigation Sounds
Highlight Navigation Sounds Select to
Screen Saver
Screen Saver
Highlight Screen SaverSelect.
The Screensaver Settings
Current Screen Saver - Here you can change the
Slide Style -
Choose from Pan & Zoom or Dissolve.
Slide Speed -
Choose from SlowMedium or Fast.
Start Time -
Saver starts. Choose from 51015 minutes or Never.
Date and Clock -
Display Info -
Alexa Hints -
Shue -
HDMI CEC Device Control
remote control to also control selected functions of
Standby
One-Touch Play ARC/eARC, Power Control and
Remote Control Pass-Through.
Highlight HDMI CEC Device Control
Select.
One-Touch Play:
One-Touch Play
Select. Allow Always Ask and Deny
Select.
ARC/eARC:
Highlight ARC/eARCSelect to switch the
Power Control:
Select
Remote Control Pass-Through:
Select to
Preferred Live TV Language
Subtitles
Spoken Subtitles
English - 18 -
Audio Description
Low volume Medium volumeHigh volume and
O O
Hybrid TV (HbbTV)
Applications
Highlight ApplicationsSelect.
Note: Available options may dier depending on the network
connection status of your TV, the Amazon account you signed
in and whether you signed in to it.
Amazon Photos
Highlight Amazon PhotosSelect.
Allow Guest Connections
Allow Guest Connections and
Select
Access
Amazon PhotosSelect. Highlight Disable
Amazon PhotosSelect
account.
Appstore
Highlight AppstoreSelect.
Automatic Updates:
Select
External Market Links: Gives you the choice of how
Select to see the
Open with the Amazon Appstore
Don't Open and Ask Before Opening. Highlight the
Select
next to your choice.
In-App Purchases:
want to allow them or not.
Select
Manage My Subscriptions: You can manage your
Simple Sign-in:
Simple Sign-in
Select. The On this device
Select
to manage for all devices.
Notifications: Set to ON
Select
Manage Installed Applications
Manage Installed Applications
Select.
if you highlight Show Select you get the
All Applications Internal Only or
USB Only.
Select.
download and re-install again in the future.
Pre-installed apps
Force stopClear data
Clear cacheClear defaultsOpen supported links
and Supported links.
Installed apps
Permissions
Launch application and Uninstall.
Equipment Control
remote can control the connected device no matter
Adding a Soundbar or Receiver
Highlight Add EquipmentSelect.
English - 19 -
Highlight either Soundbar or Receiver
Select.
Note: Make sure your soundbar or receiver is connected to
your TV and switched on.
Select.
Select.
Standby
Standby
Standby
highlight Yes Select
No Select
Volume +and -
Yes
Select. If not select No and continue until
the volume level changes.
volume level.
Soundbar/Receiver Settings
will now see either Soundbar or Receiver in the
Equipment Control menu. This will show you all the
settings for your device.
Highlight Soundbar or Receiver Select.
You will now see a list of settings.
Select.
Volume Increments: Set the amount the volume
the volume. The default increment is set to 4.
Fast Forward or Rewind to increase or
Option to restore
Infrared Options:
IR Prole Timing and Repetition
Power Controls:
Power On Delay,
Power Command and Power Control
Fire TV Input:
Change Soundbar/Change Receiver: If you
Change Soundbar/
Change Receiver Select. To remove the
device highlight Change Soundbar/Change Receiver
Option
Advanced Settings
Fast Forward or Rewind to increase or de-
crease the increments.
Option
Live TV
Highlight Live TVSelect.
Tuning in your TV
instructions.
Highlight Channel ScanSelect.
Select
Cable/Terrestrial and Satellite
If the Cable/Terrestrial
Select the transmission method on the next screen and
Select to start search.
If the Satellite
Select
YesSelect to continue
Satellite Connection
If you select Complete Channel Scan or Manual
Channel Scan
Satellite
Connection LNB
TypeLNB PowerDiSEqC VersionSingle Cable
ToneBurst and Scan Mode
If you select Manual Channel Scan
This manual suits for next models
9
Table of contents
Other Toshiba TV manuals
Toshiba
Toshiba 27AF42 User manual
Toshiba
Toshiba DW65X91 User manual
Toshiba
Toshiba 67Z27B User manual
Toshiba
Toshiba 51HX93 User manual
Toshiba
Toshiba 32A32 User manual
Toshiba
Toshiba 21S23B2 User manual
Toshiba
Toshiba 29V24E2 User manual
Toshiba
Toshiba 28L110U User manual
Toshiba
Toshiba 27AFX55 User manual
Toshiba
Toshiba 34JH9UH User manual
Toshiba
Toshiba 24D M8 Series User manual
Toshiba
Toshiba 40PW03G User manual
Toshiba
Toshiba 32A15 User manual
Toshiba
Toshiba 46H84 User manual
Toshiba
Toshiba Regza 47WLG66 User manual
Toshiba
Toshiba 49UL2063DB User manual
Toshiba
Toshiba 27A60 User manual
Toshiba
Toshiba 27A41 User manual
Toshiba
Toshiba 55 QA4C Series User manual
Toshiba
Toshiba 50L711U18 User manual
