Toto Mercer TS756A Installation instructions

ENGLISH ESPAÑOL FRANÇAIS
Installation and Owner’s Manual
Manual de Instrucciones y del Propietario
Manuel d’Installation et d’Utilisation
MERCER ®
CLAYTON ®
NEXUS ®
LLOYD ®
TS756A(L)
TS756PV
TS756E
TS784A(L)
TS784PV
TS784E
TS794A(L)
TS794PV
TS794E
TS930A(L)
TS930PV
TS930E

THANKS FOR CHOOSING TOTO!
CARE AND CLEANING
WARNING
TOOLS YOU WILL NEED
2
ENGLISH
TOTO's mission is to provide the world with healthy, hygienic and
more comfortable lifestyles. We design every product with the balance
of form and function as a guiding principle. Congratulations on your
choice.
If using solder for the installation of the shower faucet, the pressure
blance cartridge, rubber seats, and plaster guard must be removed
before heating. Otherwise, the warranty will be voided on these parts
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with mild soap, rinse
thoroughly with warm water and dry with a clean, soft cloth. Do not
use abrasive cleaners, steel wool or harsh chemicals, as these will
dull the nish. Failure to follow these instructions may void your
warranty.

BEFORE INSTALLATION
3
ENGLISH
MERCER®TS756, CLAYTON®TS784, NEXUS®TS794
TS7__A(L) TS7__E TS7__P TS7__PV
X
X X
X
X X
X

BEFORE INSTALLATION
4
ENGLISH
LLOYD®TS930
TS930A(L) TS930E TS930P TS930PV
X
X X
X
X X X
X

INSTALLATION PROCEDURES
5
ENGLISH
Shower Trim Installation
1. Make sure the gasket is in the
escutcheon and the notch of the
gasket is aligned with the notch of the
escutcheon.
For TS___P and TS___PV
Attach diverter lever to escutcheon using
supplied hex wrench
2. Remove the plastic cover from the valve
by twisting it clockwise.
3. Fasten escutcheon to pressure balance
valve using two supplied screws.
4a. Thread canopy to pressure balnce
valve. Hand tighten only. (See 4b for
Lloyd).

6
ENGLISH
4b. Attach nut securely into the pressure
balance valve.
Secure the canopy onto the
coverplate with set screw.
Temporarily install the handle
adapter onto the valve stem and
the handle onto the adapter.
5. Install the handle onto the valve stem
using supplied screw. Measure the
distance from point A on the lever to
point B on the canopy. Subtract 1/16"
from this measurement to obtain the
amount of valve stem to cut off
6. Ex. If the distance between A & B is 1",
Amount to cut off = 1"–1/16" = 15/16"
Mark the amount to cut off from the end
of the valve stem.

7
ENGLISH
7. Cut the valve stem at the mark with a hack
saw. Remove any burrs with a le
8a. Using handle, turn shaft fully clockwise.
Reposition handle so that it is in vertical
position. This is the OFF position.
Fasten handle with screw. Screw cap
onto handle. (See 8b for Lloyd)
8b. Rotate the valve stem clockwise to a
stop. Re-install the handle adapter onto
the valve stem
Install the handle onto the handle adapter,
positioning it so it is in vertical position
(the OFF position). Secure the handle
with set screw. Replace the handle end
cap at the end of the handle.

8
ENGLISH
Shower Installation
Install canopy onto shower arm. Wrap
threads with supplied thread tape. To
prevent marring the surface, use a strap
wrench or use the end of the arm for
leverage.
Install shower head with wrench. Hand
tighten only
Spout Installation
Note: The Lloyd spout can only be installed
via slip-on.
-For slip-on installation
Place pipe tape onto thread. Install
the slip-on adapter on to the
elbow. Remove the existing nipple
if necessary. Slide the spout into
position and secure with set screw.
-For IPS installation
Remove the slip-on adapter. Apply
pipe tape onto the nipple threads
and screw the spout into a secure
position.

TROUBLESHOOTING
9
ENGLISH

ROUGH-IN
TS756A(L)
TS756P/PV
TS756E
10
ENGLISH
MERCER®TS756

ROUGH-IN
TS784A(L)
TS784P/PV
TS784E
11
ENGLISH
CLAYTON®TS784

ROUGH-IN
TS794A(L)
TS794P/PV
TS794E
12
ENGLISH
NEXUS®TS794

ROUGH-IN
TS930A(L)
TS930P/PV
TS930E
13
ENGLISH
LLOYD®TS930

REPLACEMENT PARTS
14
ENGLISH
1TS756A * SHOWER HEAD ASSEMBLY (2.5GPM)
TS756AL * SHOWER HEAD ASSEMBLY (1.75GPM)
2THU4208 * SHOWER ARM
3THU4211 * ESCUTCHEON
4THU4198 O-RING
5THU4214 * SHOWER HEAD (2.5GPM)
THU4214L * SHOWER HEAD (1.75GPM)
6THU4132 * METAL HANDLE ASSEMBLY
73EU4022 * HANDLE CAP
86BU4003 SCREW
93EU4013 * HANDLE JOINT
10 THU4142 * HANDLE ASSEMBLY
11 THU4145 * CANOPY ASSEMBLY
12 THU4172 * FACE PLATE ASSEMBLY
13 THU4106 * DIVERTER HANDLE
14 6BU4009 SCREW
15 7EU4000 * COVER PLATE
16 6BU4006 SET SCREW
17 TS756E * SPOUT ASSEMBLY
18 THU4122 * STREAM BREAKER
19 9BU4011 O-RING
20 THU4175 * SPOUT ASSEMBLY
21 THU4116 * SPOUT BASE
22 6BU4008 SET SCREW
23 THU4130 SPOUT ADAPTER
24 2BU4004 RING
25 ** HEX WRENCH 5/64"
26 ** PIPE TAPE
27 ** HEX WRENCH 25MM
28 ** HEX WRENCH 1/8"
29 ** CARDBOARD TUBE 1-3/8" OD X 1-1/4" ID X 6" L
30 THU4238 * FACE PLATE ASSEMBLY (W/O DIVERTER)
31 THU4229 * COVER PLATE (W/O DIVERTER)
* SPECIFY FINISH CODE WHEN ORDERING
**PROVIDED FOR REFERENCE ONLY, NOT AVAILABLE AS SPARE PARTS
MERCER®

REPLACEMENT PARTS
TS756A(L)
TS756P
TS756PV
TS756E
2
4
5
1
30
14
12
22
19
18
6
17
25 26 27 28 29
11
13 14
20
15
16
23
21
24
10
9
8
7
31
3
15
ENGLISH
MERCER®

REPLACEMENT PARTS
16
ENGLISH
1 TS784A * SHOWER HEAD ASSEMBLY (2.5GPM)
TS784AL * SHOWER HEAD ASSEMBLY (1.75GPM)
2 THU4199 * SHOWER ARM
3 THU4202 * ESCUTCHEON
4 9BU4007 O-RING
5 THU4205 * SHOWER HEAD(2.5GPM)
THU4205L * SHOWER HEAD(1.75GPM)
6 THU4138 * METAL HANDLE ASSEMBLY
7 3EU4007 * HANDLE CAP
8 6BU4003 SCREW
9 3EU4013 * HANDLE JOINT
10 THU4157 * HANDLE ASSEMBLY
11 THU4154 * CANOPY ASSEMBLY
12 THU4184 * FACE PLATE ASSEMBLY
13 THU4103 * DIVERTER HANDLE
14 6BU4009 SCREW
15 7EU4003 * COVER PLATE
16 6BU4005 SET SCREW
17 TS784E * SPOUT ASSEMBLY
18 THU4160 * STREAMBREAKER & O-RING
19 6BU4008 SET SCREW
20 THU4130 SPOUT ADAPTER
21 ** HEX WRENCH 5/64"
22 ** PIPE TAPE
23 ** HEX WRENCH 25MM
24 ** HEX WRENCH 1/8"
25 ** CARDBOARD TUBE 1-3/8" OD X 1-1/4" ID X 6" L
26 THU4235 * FACE PLATE ASSEMBLY (W/O DIVERTER)
27 THU4226 * COVER PLATE (W/O DIVERTER)
* SPECIFY FINISH CODE WHEN ORDERING
**PROVIDED FOR REFERENCE ONLY, NOT AVAILABLE AS SPARE PARTS
CLAYTON®

REPLACEMENT PARTS
TS784A(L)
TS784P
TS784PV
TS784E
2
4
5
1
12
19
18
6
17
26
27
11
13 14
20
21 22 23 24
25
15
16
10
9
8
7
3
17
ENGLISH
CLAYTON®

REPLACEMENT PARTS
18
ENGLISH
1 TS794A * SHOWER HEAD ASSEMBLY (2.5GPM)
TS794AL * SHOWER HEAD ASSEMBLY (1.75GPM)
2 THU4217 * SHOWER ARM
3 THU4220 * ESCUTCHEON
4 THU4198 O-RING
5 THU4223 * SHOWER HEAD (2.5GPM)
THU4223L * SHOWER HEAD (1.75GPM)
6 THU4135 * METAL HANDLE ASSEMBLY
7 3EU4019 * HANDLE CAP
8 6BU4003 SCREW
9 3EU4016 * HANDLE JOINT
10 THU4151 * HANDLE ASSEMBLY
11 THU4148 * CANOPY ASSEMBLY
12 THU4178 * FACE PLATE ASSEMBLY
13 THU4103 * DIVERTER HANDLE
14 6BU4009 SCREW
15 7EU4006 * COVER PLATE
16 6BU4005 SET SCREW
17 TS794E * SPOUT ASSEMBLY
18 THU4122 * STREAM BREAKER
19 9BU4011 O-RING
20 THU4181 * SPOUT ASSEMBLY
21 THU4119 * SPOUT BASE
22 6BU4008 SET SCREW
23 THU4130 SPOUT ADAPTER
24 2BU4004 RING
25 ** HEX WRENCH 5/64"
26 ** PIPE TAPE
27 ** HEX WRENCH 25MM
28 ** HEX WRENCH 1/8"
29 ** CARDBOARD TUBE 1-3/8" OD X 1-1/4" ID X 6" L
30 THU4241 * FACE PLATE ASSEMBLY (W/O DIVERTER)
31 THU4232 * COVER PLATE (W/O DIVERTER)
* SPECIFY FINISH CODE WHEN ORDERING
**PROVIDED FOR REFERENCE ONLY, NOT AVAILABLE AS SPARE PARTS
NEXUS®

REPLACEMENT PARTS
TS794A(L)
TS794P
TS794PV
TS794E
2
4
5
1
30
12
22
19
18
6
17
25 26 27 28
29
11
13 14
20
15
16
23
21
24
10
9
8
7
31
3
19
ENGLISH
NEXUS®

REPLACEMENT PARTS
20
ENGLISH
1 TS930A * Shower heAd ASSembly(2.5GPm)
TS930Al * Shower heAd ASSembly(1.75GPm)
2 1FU4148 * Shower (SqUAre TUbe ASSy) Arm
3 ThU4291 * eScUTcheon
4 9bU4028 o-rinG
5 ThU4290 * Shower heAd(2.5GPm)
ThU4290l * Shower heAd(1.75GPm)
6 ThU4284 * meTAl hAndle ASSembly
7 ThU4288 * cAnoPy ASSembly
8 6bU4005 SeT Screw
9 9bU4023 o-rinG
10 ThU4286 * hAndle ASSembly
11 1FU4146 * AdAPTor
12 6bU4026 Screw
13 6bU4028 SeT Screw
14 9bU4014 o-rinG
15 1FU4143 * FAce PlATe ASSembly
16 1FU4145 * cover PlATe
17 6bU4027 Screw
18 9AU4004 wASher
19 6bU4005 Screw
20 TS930e * SPoUT ASSembly
21 9bU4024 o-rinG
22 6bU4029 Screw
23 7eU4009 STrAiner
24 9bU4010 o-rinG
25 ThU4283 AerATor ASSembly
26 8hU4005 FiTTinGS
27 1FU4142 * FAce PlATe ASSembly (w/o diverTer)
28 1FU4144 * cover PlATe (w/o diverTer)
* SPECIFY FINISH CODE WHEN ORDERING
**PROVIDED FOR REFERENCE ONLY, NOT AVAILABLE AS SPARE PARTS
LLOYD®