USER GUIDE
TOWA CORPORATION
Product Name: GRT-999-99-9-9-G001-A
(ROBO COVER RG-2)
Please read this User Guide before using the product to avoid accidents and damages. Keep
the guide easily accessible for future reference.
Precaution for Use
1. Be sure to check whether it is suitable for the conditions of use before using the product.
2. Before using the product, be sure to read the instruction manual of the equipment to be
attached.
3. The equipment must be turned off before installing the product.
4. Be sure to check whether it is installed properly, a running-in operation after installing the
product is recommended.
5. The maximum range of motion of the gripper of 110mm would be 70mm by installing the
product.
6. Make sure not to cover the cable by the product with excessive force when applicable as it
would cause disconnection.
7. Do not disassembly, alter, or modify the product.
8. Note that the chemicals and solvents may permeate the product.
9. Do not operate the equipment with the product in water or oil for a long time as fluids may
permeate the product under the continuous operation.
10. The product is not waterproof.
11. Be careful not to damage the product with a blade or sharp object.
12. Visible wrinkles and stains may be appeared, but they do not interfere with the quality of
the product.
13. Avoid the product contacting any hot object.
14. The equipment may get hot by installing the product.
15. The durability of the product varies depending on the operating environment and conditions.
Before using the product, please be sure to check under the actual conditions.
16. Replace the product if separation or cracking of the rubber, exposure of the fiber, or other
deterioration of the product’s surface is detected.
17. Inspect the product for scratches or damages before and after each use to protect the
equipment and avoid the malfunction.