Toyomi TW 2103R User manual

1
INSTRUCTION MANUAL
AIRY TOWER FAN
MODEL: TW 2103R
220-240V~50/60Hz
POWER: 50W

2
Product Introduction
Created and designed with domestic and overseas advanced experience in
fan production technology. With beautiful modeling, convenient use, high
blast capacity, less electricity consumption, low noise, long service life, and
reliability, this fan will make you cool in the hot summer.
Product Structure Diagram
Display
Panel
Display
Window
Front Shell
Back Shell
Front Bottom Shell
Back Bottom Shell
Base

3
Installation Instructions
1、Base installation: align the four buckle holes on the base with the other half of the
four buckle holes, and then push both sides to the middle at the same time. The
base is installed successful when they are flush on both sides.
Bayonet hole
Clasp
2、Installation of the whole machine: Insert the base into the body of the fan after
alignment with the hole of the base, and then tighten it clockwise with the nut to
complete the installation.

4
Instructions for Use
The fan has 3 wind speed and 3 types of wind, as well as oscillation and timer
functions.
CONTROL PANEL
REMOTE CONTROLLER

5
FUNCTION & OPERATION
1. Place the fan on a dry, flat and stable surface.
2. Insert the plug into any standard socket.
3. Press the button once to select the required function. The product
enters negative ion function after switching On.
4. By default, the speed turning on the fan is F1 (Low). Press the
speed button to select the desired speed from available options –F1
(Low), F2 (Middle), F3 (High).
To achieve different degrees of comfort, press the mode button to select the
desired option: wind mode (natural wind) or sleep mode (rest). The default mode is the
normal constant wind operation by default. Press the mode button once to enter the
natural wind (wind) mode. Press the mode button a second time to enter sleep mode.
5. Press the swing button to oscillate the fan. If the swing button is
pressed again, the swing function will be turned off.
6. Press the timer button to set the time period before the fan turns off
automatically. To disable the timer function, press this button until all
lights are off. The timer can be adjusted from 1hour to 24 hours.
The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the
remote become unresponsive, replace the battery following the instructions below:
1. Turn over the remote and press tab A to the right.
2. Slide out the battery tray B
3. Replace the battery with the same type, ensuring the positive side is facing upwards.

6
Safety Precautions

7
Attention:
If the flexible power line is damaged, in order to avoid dangers, it must be replaced by
its manufacturer, its Maintenance Department or similar professional technician.
Before dismantling the protective case, please make sure that the fan is disconnected
from the power supply.
Simple Troubleshooting
1. The fan cannot be started: Check whether the power line plug is inserted into the
socket, if the gear switch of this machine is turned on and if the power supply is electric.
2. During use, the machine shakes: Check whether it is placed stably and whether
there are foreign objects near it.

8
SERVICE & IMPORTANT NOTICE
●If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarity qualified person in order to avoid a hazard.
●WARNING: This appliance is not intended for use by persons (including
children) with reduce physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
IMPORTED BY NATIONAL ELECTRICAL TRADERS