
J ,to[diIo] I turtr lorq reedlng
JJ rlondr lor 2 lurnr loro leedh
Drum (over
@w
o
+
K-)
^W
@
+
@w
lettlng lhe heding.Flo (llq.4 tlns pd d0y)
{ rldndr ror I turn ior o
JJ ftndr loi 2 rum.lor
iGr
s
.EFr
r Il--
f-T-l
q,-l
&
P
ffi
\]t.#
&
ffi
" r,ti
ffi
+J
&
{EII
FEATURES
o Moisture proof for the food
o Good for flakes or granulates
o Easy filling of the food drum
o Maximum 4 feedings per day
INSTRUCTIONS
Battery
Remove the battery cover and insert the batteries into the casing and
reattach the cover by applying pressure to the top and bottom cli-ps.
ED. z^AA r.Jv drKdrrne oattenes
-tt. z^nn A r.rv drKdrne oattenes
Altention:
Do not use rechargeable batteries.
lf the LCD displays "1o", change the battery immediately. lf the batteries are
not changed within 3 days, all the set programs will be invalid to avoid the
teedtng port stops at the improper position.
Clock Setting
l.Press the "SET" button and the "HOUR', will flash; press .ADJUST, to set the
..HOUR";
2.To set the "MtNUTES", press "MODE,', the,,MINUTES,,will flash; press,,ADJUST'
to set the "MINUTES".
3.Once the correct time is displayed, press,,SEI,to store the current time.
Setting feeding times and rotations
This digital feeder is capable of programming up to four feedinq times per dav
with a maximum of two turns per feeding seisi6n. All of these flnctioni.an de
adjusted independently.
l.Press "MODE" and "00:00" is displayed on the LCD.
2.Press "SET" and the "HOUR" will blink, adjust the .HOUR,, using the,,ADJUST,'
button. Once the correct feeding hour is displayed, press,MObE,'to set the
.,MINUTEs".
3.Press "ADJUST" to adjust the "MlNUTES".
4Press "MODE" again and the digit "l " blinks in the top portion of the display.
This function indicates the first feeding cycle of the d'ay. press ,,ADJUST,, to
display a single arrow pointing downward. press.ADJ0ST,, once for a single
rotation, or twice for two rotations. The number of arrows will show how-
many rotations are programmed.The rotations are dispensed at a one
minute interval.
5.Press "5ET" to store the feeding time.
.Repeat procedures 1 through 4 to set the next feedinq time and rotation.
Press "MODE" to cycle through all four feeding times t6 return to the current
set time. Up to four feeding times can be set each day.