TOZED ZLT S10 User manual
ZLT S10 Wireless Router User Manual
Thank you for choosing the Tozed ZLT S10 4G Wireless Router.
Please read this user manual completely, prior to use.
Disclaimer: Tozed Corporation reserves the right to change or modify any
information or specifications contained in this manual without prior notice
and without any liability.
1. Key Parameters
● Working temps : -20℃ -- +70℃
● Relative humidity : 5%--95%
● Working frequency : TDD-LTE: Band 40
● Power supply : Input AC :100V~240V，50Hz~60Hz
Output DC: 12V, 0.5A
● Size :155x155x45(mm)
● Weight :310g
● Rate of uplink and downlink :LTE(Cat 4): DL150Mbps；UL50Mbps
2. Installation
2.1 Open the rear shell of the router and insert USIM into the slot. Please
make sure you insert the sim card in the right direction
2.2 You may use a standard RJ45 cable if you wish to connect the router to a
LAN/PC
2.3 Use the power adapter to connect the router to the power socket. Turn
on the power switch. The router starts automatically after the boot,
allowing for the initialization of the 1-2 minutes.
Attention:
1. Do not insert the USIM card when connected to power supply.
2. Please gently insert the USIM card, .as it may get damaged if inserted
forcefully.
3. About the Router
3.1 Ports & Functions
1
Power
2
Wi-Fi LED
3
LTE LED
4
Signal Strength LED
5
USB
6
Wi-Fi
7
WPS
8
LAN Port
9
POWER
10
DC Power
11
Antenna
12
SIM
13
SIM Cover
3.2 Indicators
Type
Status
Description
WI-FI
Off
WI-FI off
On
WI-FI on
Blinking
WPS client is connecting
Signal
Strength
Off
No signal, (the signal can be checked
via the router configuration page).
On
Signal reception, 3 bars or better
POWER
Off
Router power off
On
Power normal, router power on
4G_LTE
Yellow light
on
4G network is not connected or weak
connection.
Blue light on
4G network is connected, internet
connection available
4. Quick Configuration Guide
The router supports standard RJ45 cables or WLAN wireless modes to
connect to a LAN, Computer or any other supportive device. No drivers
required; supports Windows XP, Windows 7, Windows 8, Windows 10, MAC
OS, Linux, Android etc.
Step 1：
Set the computer IP address to match the router network segment, or use
automatic access to get the IP address. After the computer IP address is set,
enter the IP address of the device on the IE browser: 192.168.8.1, Press
‘Enter’on the device configuration.
Step 2：
Click the‘Login’ button to enter the configuration page
The login username and password are printed on the sticker at the bottom
of the device.
Step3：
Go to‘Quick Settings’tab
（1）SSID configuration - the user can customize the SSID
（2）Wi-Fi password settings – You can customize the Wi-Fi encryption
mode, and set your own password to ensure the security of the account.
（3）Preview the contents of the configuration - review settings and click
“Apply”.
5. Device List
Item UNIT Quantity
CPE unit 1
User manual PCS 1
Power adapter PCS 1
cable PCS 1
6. Customer Support
Hotline: 117 100 100
E-mail: [email protected]
Office:
Dialog Broadband Networks (Pvt) Ltd. (PV 261),
No. 475, Union Place, Colombo 02,
Sri Lanka
Tel +94 117 100 100 / FAX + 94 117 100 701
www.dialog.lk
