Intercoax HPS-1008 User manual

Package
HPS-1008
Adapter Bracket Quick Start Guide
Overview
The HPS-1008 is 8 + 2 port Gigabit Hybrid PoE+ Switching
Hub that transmits 1Gbps Ethernet and supports PoE+ (up to
25.5W).
Using HPS-01 (2 Port Hybrid PoE Switch), the device supports
100Mbps Ethernet transmission and PoE+ power supply up
to 250 meters and it is possible to connect multiple devices in
cascade mode.
With dual DC inputs supply secured PoE+ power up to 25.5W by
each port and can also be used redundancy power source.
Optional 19" rack mount is available for easy installation.
Features
Gigabit 8+2 port PoE Switch
- Downlink: 8 x RJ45 - Uplink: 2 x RJ45
10/100/1000 Ethernet (Full Duplex)
Extended Ethernet (100Mbps) distance up to 250 m
(With HPS-01, 2 port Hybrid PoE Switch)
Cascade configuration
(With the HPS-01: 2 port Hybrid PoE Switch)
PoE, PoE+ output up to 25.5W
Over current protection for secured power supply
Surge Protection
Dual DC adapter inputs
Compact Hybrid Switch Design
Optional 19" Rack mount
Hardware Overview
LINK PoE LINK PoE LINK PoE LINK PoE LINK PoE LINK PoE LINK PoE LINK PoE
10 / 100 1000 10 / 100 1000
Up Link
PWR A PWR B
Hybrid Gigabit 8-port PoE Switch (802.3af/at)
DC 57V
①RJ45 포트 ②RJ45 Unlink 포트
③DC IN (DC 57V)
① RJ45 Port ② RJ45 Unlink Port
③ DC IN (DC 57V)
1. 10/100/1000 Base-T Ethernet port / 8 Port PoE + (IEEE802.3at / Max. 25.5W Output)
PoE LED lights up when the device outputs PoE to the end-device and Link LED flickers when the data linked.
If PoE LED flickers, the current is above the rating.
If PoE LED is OFF, please use appropriate product as it is out of PoE range which HPS-1008 may cover.
If the end-device doesn't support PoE, power supply is interrupted and the device can be used for data communication only.
2. 10/100/1000 Base-T Ethernet Uplink Port
The connection speed of the Uplink port is displayed as link LED 10/100 or 1000.
3. DC Input port (Max. 57VDC input)
2 power supplies are applicable for installing the HPS-1008. (The same model of the power supplies are recommended)
If the voltage differs between the two power supplies at the same time, only high voltage input power is used. And the only Power LED
which is used is ON.
When power is supplied from two input power sources at the same time, power LEDs (2) for each ports are turned on. (When using 2
power inputs, it is recommended to use the power adapter with 0.4V or less output voltage difference.
HPS-1008
Quick Start Guide
Please read carefully the instruction manual before use.
Depending on the model, the image
and the actual look of the product may vary.
[Rev.1.0]
All manuals and user guides at all-guides.com
all-guides.com

Caution
Please install the device following the installation guide.
Do not touch the device and cable with wet hands.
Keep away from moisture and shock.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat.
Indoor use only.
Do not use for other purposes.
Do not disassemble or modify this device.
Do not put any sticker or paint on it.
If this device is defective or malfunctioning, please unplug
the power adapter immediately and contact dealer or service
center.
Use only rated 56V power adapter specified by the
manufacturer.
ÎConnect DC power to the device first and then to AC outlet.
Specification
Model HPS-1008:
8 Port Hybrid PoE Switch
Interface
Downlink 8 x RJ-45 – 10/100/1000 Base-T
with Auto-detect MDIX
Uplink 2 x RJ-45 – 10/100/1000 Base-T
with Auto-detect MDIX
Transmission Rate Max. 1Gbps Full Duplex
Transmission
distance Ethernet / PoE
Up to 100m
Up to 250m with HPS-01
(2 Port Hybrid Switch)
LED
Indication
Ethernet (Downlink) 8 x RJ45 Data Link (Green)
Ethernet (Uplink) 2 x RJ45 Data Link (Green/Orange)
PoE Output 8 x PoE Output (Orange)
PWR Input 2 x Power Input (Blue)
Power Input 2 x Power input [ DC-Jack ]
DC48V-57V
Power
Output
PoE IEEE802.3af(PoE), IEEE802.3at
(PoE+ / up to 25.5W)
Dimension 225(L) x 105(W) x 29(H) mm
Mechanical
Weight 700g
Operating Temp. 0 ~ 50 °C
Storage Temp. - 30 ~ 80 °C
Environment Relative Humidity 10% ~ 90%
Compliance
Certification FCC, CE, KC
Surge Protection IEC 61000-4-5 4kV(1.2 / 50us),
2kA(8 / 20us)
Applications
NVR Network Switch
PoE Camera
HPS-01
DC 57V
(PoE 사용 시 DC48-57V
아답터 적용)
HPS-1008
PTZ IP PoE
Camera
PoE Camera
PTZ IP PoE
Camera
Max. 100m
Max. 100m
Max. 250m
Max. 100m
AC/DC Adapter(12V)
DC 57V
(When using PoE
DC48-57V adapter applied)
Warranty
This device has passed the quality control and product
inspection.
Please install and use according to the installation guide.
The warranty period for this product is 24 months from the
date of purchase.
If this device is defective or malfunctioning, please unplug
the power adapter immediately and contact dealer or service
center.
Any damages or breakage from user’s abuse, accident,
modification or natural disasters will not be covered
manufacturer’s warranty
Please visit below website for more detailed information.
http://www.intercoax.com
TEL : [phone]~4 FAX : [phone]
E-mail : [e-mail]
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
All manuals and user guides at all-guides.com