TP-Link TL-WN725N User manual

150Mbps Wireless N Nano USB Adapter
7106506565 REV5.0.0
Quick
Installation
Guide
MODEL NO. TL-WN725N
Connect to a Computer
1 2 Install Driver and Utility
Insert the CD.
Browse the CD, go to
TL-WN725N_WN723N > Mac OS X Driver,
unzip the Mac OS X version.zip file and run
the Installer.
3Join a Wireless Network
For Mac OS X
Follow the wizard to complete the
installation.
b.
a.
c.
Note:
You can also download the driver and utility at
http://www.tp-link.com.
uninstall.commandInstaller.pkg
SHELL
Via TP-LINK Utility
a. Click (TP-LINK Wireless Configuration
Utility) on the menu bar.
Fri 5:14 PM
TP-LINK_0001
TP-LINK_0903
TP-LINK_TEST_Device
TP-LINK_XXXX
Join Other Network
WPS
Open Wireless Utility
USB-WiFi: On
Turn USB-WiFi Off
Insert the adapter into a USB port on your
computer directly.
b. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.

Connect to a Computer
1
For Windows
Note:
In Windows XP or Windows Vista, a Found New Hardware
Wizard window will appear when the adapter is detected.
Please click Cancel.
This USB Adapter can only be powered by computers
that comply with Limited Power Source (LPS).
2Install Driver and Utility
Insert the CD and run the Autorun.exe
from the pop-up Autoplay window.
Select TL-WN725N and click Install
Driver, then follow the InstallShield
Wizard to complete the installation.
Notes:
1. You can also download the driver and utility at
http://www.tp-link.com.
2. In some operating systems, the CD screen will pop
up automatically. Otherwise, run the CD manually.
a.
b.
3Join a Wireless Network
Insert the adapter into a USB port on your
computer directly.
For more information, please visit our website
http://www.tp-link.com
©2016 TP-LINK
Click or (Network icon) on the task bar,
select your Wi-Fi network, and click Connect.
Note:
In Windows XP, you need to close the TP-LINK Utility before
using the Windows Wireless Utility.
Option 1: Via Windows Wireless Utility
Networks
Connect automatically Connect
√
Wi-Fi
TP-LINK_XXXX
TP-LINK_TEST_Device
TP-LINK_0903
Option 2: Via TP-LINK Utility
Select your Wi-Fi network from the utility
window and click Connect. The symbol
indicates a successful connection.
Network Name(SSID)
Channel
Signal
Security
2 (2.4G)
5 (2.4G)
11 (2.4G)
None
WPA/WPA2-Personal
None
TP-LINK_0903
TP-LINK_TEST_Device
TP-LINK_0001
6 (2.4G) TP-LINK_XXXX
Connect automatically
WPA/WPA2-Personal
Connect
Status WPS Profile AdvancedNetwork
TP-LINK_0903
Network Na
TP-LINK_XXXX
Note:
During the installation, select TP-LINK Wireless
Configuration Utility and Driver if you want to use
TP-LINK Utility and WPS function.
Setup Wizard
Browse CD EXIT
TL-WN723N TL-WN725N
Install Driver
User Guide