TP-Link TX20U Nano User manual

Wireless USB Adapter
Quick Installation Guide
Images are for demonstration only.
1Connect to a Computer
7106510401 REV1.0.0©2023 TP-Link
2Install Driver
a. Go to My Computer or This PC.
b. Double click the TP-Link CD-ROM then
run SetupInstall.exe to install driver.
Notes:
• If you cannot nd the setup program, please download
the driver at www.tp-link.com/support.
• If an unknown publisher message pops up, select Ye s
to continue.
• If Windows User Account Control requires admin
credentials, type user name and password of your
Windows administrator account.
SetupInstall.exe

For technical support, replacement
services, user guides, and other
information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
3Join a Wireless Network
a. Click the network icon ( ) on the
taskbar.
b. Select your Wi-Fi network, click
Connect and enter the password when
prompted.
Network 6
Connected
Network settings
Connect automatically
Connect
√
TP-Link_XXXX
Troubleshooting
If you have problems during the installation,
please refer to the following online FAQs.
T1. Can’t nd the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t nd or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
· Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
· Do not use the device where wireless devices are not allowed.
· Keep the device away from water, re, humidity or hot environments.
· This product can be powered only by power supplies that comply with
Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1.
Safety Information