TP-Link TD-W8101G User manual

TD-W8101G
54M Wireless ADSL2+ Router
Rev: 1.0.0
1910010122

COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. ®is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO., LTD. All rights
reserved.
http://www.tp-link.com

FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.”
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.

National Restrictions
2400.0-2483.5 MHz
Country Restriction Reason/remark
Bulgaria General authorization required for outdoor use and
public service
France Outdoor use limited to 10
mW e.i.r.p. within the band
2454-2483.5 MHz
Military Radiolocation use. Refarming of the 2.4 GHz
band has been ongoing in recent years to allow current
relaxed regulation. Full implementation planned 2012
Italy If used outside of own premises, general authorization is
required
Luxembourg None General authorization required for network and service
supply(not for spectrum)
Norway Implemented This subsection does not apply for the geographical area
within a radius of 20 km from the centre of Ny-Ålesund
Russian Federation Only for indoor applications
Note: Please don’t use the product outdoors in France.

CONTENTS
Package Contents....................................................................................................1
Chapter 1 Introduction.........................................................................................2
1.1 Product Overview..................................................................................2
1.2 Main Features.......................................................................................2
1.3 Conventions..........................................................................................3
Chapter 2 Hardware Installation.......................................................................... 4
2.1 The Front Panel ....................................................................................4
2.2 The Back Panel.....................................................................................5
2.3 Installation Environment........................................................................5
2.4 Connecting the Router..........................................................................6
Chapter 3 Quick Installation Guide.....................................................................8
3.1 Configure PC.........................................................................................8
3.2 Login...................................................................................................11
Chapter 4 Software Configuration ....................................................................14
4.1 Status..................................................................................................14
4.2 Quick Start ..........................................................................................15
4.3 Interface Setup....................................................................................15
4.3.1 Internet .................................................................................................... 15
4.3.2 LAN ......................................................................................................... 20
4.3.3 Wireless................................................................................................... 23
4.4 Advanced Setup..................................................................................27
4.4.1 Firewall.................................................................................................... 27
4.4.2 Routing.................................................................................................... 27
4.4.3 NAT......................................................................................................... 28
4.4.4 QoS......................................................................................................... 31
4.4.5 VLAN....................................................................................................... 33
4.4.6 ADSL....................................................................................................... 35
4.5 Access Management...........................................................................36
4.5.1 ACL ......................................................................................................... 36
4.5.2 Filter ........................................................................................................ 37
4.5.3 SNMP...................................................................................................... 45
4.5.4 UPnP....................................................................................................... 45
4.5.5 DDNS ...................................................................................................... 45

4.5.6 CWMP..................................................................................................... 46
4.6 Maintenance........................................................................................47
4.6.1 Administration.......................................................................................... 48
4.6.2 Time Zone ............................................................................................... 48
4.6.3 Firmware.................................................................................................. 50
4.6.4 System Restart........................................................................................ 52
4.6.5 Diagnostic................................................................................................ 52
4.7 Help.....................................................................................................52
Appendix A: Specification.....................................................................................54

TD-W8101G 54M Wireless ADSL2+ Router User Guide
1
Package Contents
The following contents should be found in your package:
¾One TD-W8101G 54M Wireless ADSL2+ Router
¾One DC power Adapter for TD-W8101G ADSL2+ Router
¾Quick Installation Guide
¾One RJ45 cable
¾Two RJ11 cables
¾One ADSL splitter
¾One Resource CD , including:
zThis User Guide
zOther Helpful Information
)Note:
Make sure that the package contains the above items. If any of the listed items are damaged or
missing, please contact with your distributor.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
2
Chapter 1 Introduction
1.1 Product Overview
Thank you for choosing the TD-W8101G 54M Wireless ADSL2+ Router. The device is designed
to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or
802.11g/802.11b wireless network.
The TD-W8101G connects to an Ethernet LAN or computers via standard Ethernet ports. The
ADSL connection is made using ordinary telephone line with standard connectors. Multiple
workstations can be networked and connected to the Internet using a single Wide Area Network
(WAN) interface and single global IP address. The advanced security enhancements, IP/MAC
Filter, Application Filter and URL Filter can help to protect your network from potentially
devastating intrusions by malicious agents from the outside of your network.
Quick Start of the Web-based Utility is supplied and friendly help messages are provided for the
configuration. Network and Router management is done through the Web-based Utility which can
be accessed through local Ethernet using any web browser.
ADSL
The TD-W8101G supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI
specifications. In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports
dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.
Wireless
In the most attentive wireless security, the Router provides multiple protection measures. It can be
set to turn off the wireless network name (SSID) broadcast so that only stations that have the
SSID can be connected. The Router provides wireless LAN 64/128-bit WEP encryption security,
WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security.
1.2 Main Features
¾One 10/100Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX), one RJ11 port.
¾Provides external splitter.
¾Adopts Advanced DMT modulation and demodulation technology.
¾Supports bridge mode and Router function.
¾Multi-user sharing a high-speed Internet connection.
¾Downstream data rates up to 24Mbps, upstream data rates up to 3.5Mbps（With Annex M
enabled).
¾Supports long transfers, the max line length can reach to 6.5Km.
¾Supports remote configuration and management through SNMP and CWMP.
¾Supports PPPoE, it allows connecting the internet on demand and disconnecting from the
Internet when idle.
¾Provides reliable ESD and surge-protect function with quick response semi-conductive surge
protection circuit.
¾High speed and asymmetrical data transmit mode, provides safe and exclusive bandwidth.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
3
¾Supports All ADSL industrial standards.
¾Compatible with all mainstream DSLAM (CO).
¾Provides integrated access of internet and route function which face to SOHO user.
¾Real-time Configuration and device monitoring.
¾Supports Multiple PVC (Permanent Virtual Circuit).
¾Built-in DHCP server.
¾Built-in firewall, supporting IP/MAC filter, Application filter and URL filter.
¾Supports Virtual Server, DMZ host and IP Address Mapping.
¾Supports Dynamic DNS, UPnP and Static Routing.
¾Supports system log and flow Statistics.
¾Supports firmware upgrade and Web management.
¾Provides WPA-PSK/WPA2-PSK data security, TKIP/AES encryption security.
¾Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List).
¾Supports DYING GASP (For the regions who demand).
1.3 Conventions
The Router or device mentioned in this User guide stands for TD-W8101G without any
explanations.
Parameters provided in the pictures are just references for setting up the product, which may differ
from the actual situation.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
4
Chapter 2 Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs locate on the front panel, they indicate the device’s working status. For details, please
refer to LED Explanation.
LED Explanation:
Name Status Indication
Off No Power
Power On Power on
Off No data transmitting or receiving on WAN port
Quick Flash There is data transmitting or receiving on WAN port
Internet
On Network is available by successful PPP connection
Slow flash Connection to telecom network is abnormal
Quick flash Connecting to the telecom networkADSL
On Connection to telecom network is OK
Off The Wireless function is disabled
Slow flash The Wireless function is enabled
WLAN
Quick flash Sending or receiving data over wireless network
Off There is no device linked to the corresponding port
On Connected to a device through the corresponding port
LAN
Flashing Sending or receiving data over corresponding port

TD-W8101G 54M Wireless ADSL2+ Router User Guide
5
2.2 The Back Panel
Figure 2-2
¾POWER: The Power plug is where you will connect the power adapter.
¾RESET: There are two ways to reset the Router's factory defaults.
Method one: Press the reset button of the Router; keep the reset button pressed down for
more than five seconds.
Method two: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
¾LAN: Through the port, you can connect the Router to your PC or the other Ethernet network
devices.
¾LINE: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
¾Antenna:Used for wireless operation and data transmit.
)Note:
There is an additional printed antenna with 0 dBi gain. Without external antenna, you can also
connect the Router to your PC or the other Ethernet network devices by close quarters.
2.3 Installation Environment
¾The Product should not be located where it will be exposed to moisture or excessive heat.
¾Place the Router in a location where it can be connected to the various devices as well as to a
power source.
¾Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
¾The Router can be placed on a shelf or desktop.
¾Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
6
2.4 Connecting the Router
Before installing the device, please make sure your broadband service provided by your ISP is
available. If there is any problem, please contact your ISP. Before cable connection, cut off the
power supply and keep your hands dry. You can follow the steps below to install it.
Step 1: Connect the ADSL Line.
Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on
the rear panel of TD-W8101G, and insert the other end into the wall socket.
Method two：You can use a separate splitter. External splitter can divide the data and
voice, and then you can access the Internet and make calls at the same time. The
external splitter has three ports:
•LINE: Connect to the wall jack
•PHONE: Connect to the phone sets
•MODEM: Connect to the ADSL LINE port of TD-W8101G
Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel of
TD-W8101G. Connect the other end to the MODEM port of the external splitter.
Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s
Ethernet port or a regular hub/switch port, and the other end to the LAN port on the
TD-W8101G.
Step 3: Power on the computers and LAN devices.
Step 4: Attach the power adapter. Connect the power adapter to the power connector on the rear
of the device and plug in the adapter to a wall outlet or power extension.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
7
Figure 2-3

TD-W8101G 54M Wireless ADSL2+ Router User Guide
8
Chapter 3 Quick Installation Guide
3.1 Configure PC
After you directly connect your PC to the TD-W8101G or connect your adapter to a Hub/Switch
which has connected to the Router, you need to configure your PC’s IP address. Follow the steps
below to configure it.
Step 1: Click the Start menu on your desktop, right click My Network Places, and then select
Properties (shown in Figure 3-1).
Figure 3-1
Step 2: Right click Local Area Connection (LAN), and then select Properties.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
9
Figure 3-2
Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties
button.
Figure 3-3
Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
10
Figure 3-4
)Note:
You can configure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the Start menu on your desktop, select run tab, type cmd or command in the field
and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.
If the result displayed is similar to the screen below, the connection between your PC and the
Router has been established.
Figure 3-5
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Router.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
11
Figure 3-6
You can check it follow the steps below:
1) Is the connection between your PC and the Router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2) Is the TCP/IP configuration for your PC correct?
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Login
Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:
Start your web browser and type the private IP address of the Router in the URL field:
192.168.1.1.
After that, you will see the screen shown below, enter the default User Name admin and the
default Password admin,and then click OK to access to the Quick Setup screen. You can follow
the steps below to complete the Quick Setup.
Figure 3-7
Step 1: Select the Quick Start tab, then click RUN WIZARD, and you will see the next screen.
Click the NEXT button.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
12
Figure 3-8
Step 2: Configure the time for the Router, and then click the NEXT button.
Figure 3-9
Step 3: Select the connection type to connect to the ISP (We select PPPoE/PPPoA mode for
example here), and then click the NEXT button.
Figure 3-10
Step 4: Configure the following options provided by your ISP: Username, Password,VPI, VCI
and Connection Type. Then click Next.

TD-W8101G 54M Wireless ADSL2+ Router User Guide
13
Figure 3-11
Step 5: Configure the rules for the WLAN, and click NEXT.
Figure 3-12
)Note:
If the Access Point is activated, the wireless function will be available even without the external
antenna because of an additional printed antenna. To adopt the wireless security protection
measures, please refer to section 4.3.3.
Step 6: Click NEXT to finish the Quick Start.
Figure 3-13

TD-W8101G 54M Wireless ADSL2+ Router User Guide
14
Chapter 4 Software Configuration
This User Guide recommends using the “Quick Installation Guide” for first-time installation. For
advanced users, if you want to know more about this device and make use of its functions
adequately, maybe you will get help from this chapter to configure the advanced settings through
the Web-based Utility.
After your successful login, you can configure and manage the device. There are main menus on
the top of the Web-based Utility; submenus will be available after you click one of the main menus.
On the center of the Web-based Utility, there are the detailed configurations or status information.
To apply any settings you have altered on the page, please click the SAVE button.
4.1 Status
Choose “Status”, you can see the next submenus: Device Info, System Log and Statistics.
Click any of them, and you will be able to configure the corresponding function.
Figure 4-1
Choose “Status→Device Info” menu, and you will be able to view the device information,
including LAN, WAN and ADSL. The information will vary depending on the settings of the Router
configured on the Interface Setup screen.
Figure 4-2