TRACETREE RAT2 User manual

1
TRACETREE
TRACETREE
TRACETREE
TRACETREE RAT2
RAT2
RAT2
RAT2 User
User
User
User Manual
Manual
Manual
Manual

2
Contents
Contents
Contents
Contents
Chapter
Chapter
Chapter
Chapter 1:
1:
1:
1: Ready
Ready
Ready
Ready ,Install
,Install
,Install
,Install Begin
Begin
Begin
Begin Use
Use
Use
Use
1. Welcome
2. Standard parts
3 ， Attention before use
1 SIM card ( Phone card) use instruction
2 Install SIM card
3 Install Device
4 ， Programme LED indicate
Chapter
Chapter
Chapter
Chapter 2:
2:
2:
2: Function
Function
Function
Function
1 LBS locate
2 SMS locate
3 Link Locate
4 Real time tracking
5 Cancel Real time tracking
6 Add preset number
7 Check Preset number
8 Delete Preset Number
9 Change Password
10 Check Password
11 Default ( Reset)
12 Move Alarm
13 Over Speed Alarm
14 Geo-Fence Alarm
15 Low battery Alarm
16 Cancel All Alarm
17 Upload Interval Set up
18 Time Zone set up
19SOS Alarm
20 Set IP
21 Set APN
22 Set User name and password
23 Check ID
24 Turn off tracker by SMS command
Chapter
Chapter
Chapter
Chapter 3
3
3
3 :Mobile
:Mobile
:Mobile
:Mobile Tracking
Tracking
Tracking
Tracking Application
Application
Application
Application Function
Function
Function
Function
1.
1.
1.
1. GPRS
GPRS
GPRS
GPRS version
version
version
version of
of
of
of Mobile
Mobile
Mobile
Mobile Tracking
Tracking
Tracking
Tracking Application
Application
Application
Application function
function
function
function
Download Application From APP and Android Market
Choose Device
GPS locate

3
LBS locate
Real time tracking
Monitoring
Engine Off
Chapter
Chapter
Chapter
Chapter 4:
4:
4:
4: Free
Free
Free
Free tracking
tracking
tracking
tracking Platform
Platform
Platform
Platform Function
Function
Function
Function
Welcome
Language Interface
Log in Interface
Main Interface
Function
Attention
FAQ
Specification
After sale service
Chapter 1: Ready ,Install ,Begin Use
Thank for using RAT2
RAT2
RAT2
RAT2 Waterproof CAR GPS tracker , This device built in GPS and GSM

4
module,It can receive GPS signal to get position and send by GPRS （ belongs GSM module) to
our server ,User can real time tracking the car and get position though the internet .Any kind
Notebook or smart phone can online tracking it ,In additional, Our company engine one Mobile
tracking application basic the IOS and Android software .User can visit APP or Android market
and download this application , it can use to control the device . This device is smaller
design ,easy installation and suit for vehicle tracking ,Management and Anti-theft.
Please visit our Free Tracking platform www.tracetree.net and choose the language as your
want ,when your first time to log in the platform ,the default log in ID and password is the
last 6 S/N number of device . (Every tracker has unique S/N number stick the device
background ,the log in ID can't be changed ,but the password can be changed)
The device can be used to company vehicles, buses, taxis, trucks, moving equipments,
transportations etc. The user can add the group for their customer by themselves or request supplier
support .
Free Tracking platform : www.tracetree.net , Demo ID and password : 123456
1. Standard Parts
2.B efore use
1 SIM Card( Phone Card) introduce :
ON/OFF
Button
USB lineHomeAdpater
Because the tracker built in GSM module ,attention please follow the rule ,Don't use the tracker
near the hospital or gas station ,it maybe danger.
Car charger
Power line

5
This device need GSM net SIM Card ,Before install the SIM card ,please open the Caller ID ,SMS and
GPRS function service . After install the SIM card ,the SIM card number is the Tracker Number ,when your
use the tracker to locate ,check ,set up function ,all set up need send command to this number ,so we
call it tracker number .
■ This device only use 2G GSM net ,it can't work on CDMA or 3G GSM net
■ Please confirm the PIN code had been closed before install the SIM Card.( If you use it in mobile
no need input any password ,so it means has been closed )
■ Please turn off the tracker before install or take off the SIM Card.
2 Install SIM Card :
As below : First remove the rubber Button ,Pull out the SIM card socket. , and place the SIM card
into the socket (ensure that the SIM card contact is facing down). Cover the rubber button.
3. Install Device:
■ After install SIM card ,please connect the device with the car battery.(12V-24V )
■ If your don't connect the car battery ,the device has its backup battery ,it can keep work 10-12
hours .
■ Attention please the device recharge voltage is 5V ,it will be danger if your connect the voltage
higher than this range. Meanwhile please don't broken the fuse. When your use this device first time
and there is no anymore battery ,please connect with car battery ,After 20 minutes it will work stable ,the
tracker locate will get a little longer in first time

6
Red- 12-35V car battery
Black- GND( Car body)
Power ON/OFF:
Power on : Prees the until Green LED light then release the button , The device power
on ,and search the GSM,GPS signal , waiting for the Green and Blue LED flash ,means the device work stable .
Power On: Under Power off ,connect with car battery ,it will automatic power on .
Power off: press then Green LED flash ,then release the button ,it will power off ,Press the
button three times ,about 2-3 sec ,the LED will over means device power off .
5. Programme LED indicate
Blue LED off Green LED continue on : Power on ,search GSM net
Blue LED on Green LED on : GSM signal well, GPS signal weak,GPRS can't work
Blue LED on Green LED flash: GSM signal well, GPS signal well,GPRS can't work
Blue LED Flash Green LED on : GPRS work well ,GPS signal weak
Blue LED flash Green LED off: GPRS work well ,GPS signal well ,GPRS connect well.
Green LED off ,Blue LED off : Power off
Red LED : indicate recharge the battery ,Red LED light ,means charging ,Red LED off means no battery
or full battery .
Yellow LED: Yellow LED flash indicate the device is moving ,Yellow LED off means the device is quite .

7
Chapter 2: Function

8
1,Command
1,Command
1,Command
1,Command List
List
List
List

9
Function Fix Command format Reply Remark
LBS locate LBS *000000 LBS address
If command or PW is wrong will
indicate your wrong command
SMS Locate SMS *000000 Long and Lat
Link Locate Link *000000
Google link
Real time
tracking
tracking *000000 every 1 minutes will
send locate information
Long and Lat
Cancel Real
time tracking
Canceltracking *000000 Cancel OK
Add Preset
Number
AddNumber *000000*A*13828819646 Add B or
C same command
Add Number OK
Check preset
Number
Check *000000
A: 13828819646 ； B ：
13823764594 ； C ：
15814016516
Delete phone
Number
DeleteNumber *000000*A Delete OK
Change PW ChangePW *000000*123456 New PW ： 123456
Check PW CheckPW PW ： 000000
Default Reset *000000
Move Alarm Movealarm *000000 Move alarm OK
If command or PW is wrong will indicate
your wrong command
Over Speed
Alarm
OverSpeed
*000000*50
Over Speed OK
Geo-
Fence Alarm
Overarea* 000000*10
0
Over area OK
Low Battery
Alarm
Only Preset Number can get alarm SMS
Cancel All
alarm
CancelAll *000000 Cancel All alarm OK
One Preset Number can get alarm
message
Upload interval
set up
INTERVAL* 000000*00
0
Set Upload Interval with detail sec
The last 000 means from 015-999 sec can
be set up ,the upload time can't lower
15 sec

10
Attention: 1, Upon all command send by SMS ,if your can't get reply by SMS ,it means the GSM net is busy
or not stable .the default password is "000000" ,Every command must add "*" mark.
2.There is no any preset number before selling ,Please add preset number ,then you can set up change
Password and check PW function .please reference the command list to set up related function .
3 ， Please attention Tracking function ,If you set up this function , the tracker will send locate
information to your mobile every 1 minutes .This function will cost more SMS charge.
4 ， If GPRS not stable ,GPS signal well ,the Tracker will storage GPS data and upload the data to
the server when GPRS stable .
5,If the tracker not set preset number ,All function can be set up by strange number except Engine
off alarm ,SOS alarm .
6 ， If there is space before the command or there is space during the command ,the tracker only reply
wrong command ,it will not answer the detail reason .
7.
T
he tracker ID is printed on the label of the tracker, the S/N number on the label is also the
ID number. If the label is missing, send an SMS “ ID* 000000 ” to tracker, in which, “ ID ” is the fixed command
and “ 000000 ” is the password. Having successfully been made, there will be a SMS “ ID: HC0000TR0000004 ” ,
in which, “ HC0000TR0000004 ” is the ID and every tracker corresponds to the only number. This number is used
to differentiate the tracking uploaded to the website from others.
8. After default has been set, all IP / APN / GPRS / TIME ZONE settings are reverted back to default, all
SOS Only Preset Number can get SOS SMS
Time zone time *000000*+00 ： 00 Time with battery volume
Last 00:00 explain ,First 00
means 1-13 hours ,last00 means
minutes ,only can set up 30
minutes.
Set IP
IP* 000000 *134.159.152.
142,9258
IP*000000*134.159.152.142.9258
If use our platform ,No need set
up IP
Set APN APN *000000*apnname APN:apnname & wrong Command
APN is needed set up when u use
GPRS function
Set User Name
and PW
USERNAME *000000*us
ername*password
Username:username,
Password:password
If set up GPRS need set up the user
name or PW please set them
Check ID ID *000000 ID:xxxxxx
If command or PW is wrong will indicate
your wrong command
Turn off
tracker by
SMS
TURNOFF*000000 Tracker Turn Off!

11
preset phone numbers are deleted and the password is changed to 123456. All the alarm settings are canceled,
if the IP/APN/GPRS name& password/TIMEZONE are changed. You need to set these again by sending an SMS.
Chapter 3 :Mobile Tracking Application Function
GPRS
GPRS
GPRS
GPRS version
version
version
version --
--
--
-- Mobile
Mobile
Mobile
Mobile Tracking
Tracking
Tracking
Tracking Application
Application
Application
Application introduce:
introduce:
introduce:
introduce:
This mobile control software named Mobile tracking ,it can work in IOS and Android software mobile .
This kind mobile tracking has two kind version ,one version is SMS reply ,another one is GPRS reply .if use

12
GPRS version ,so all command send and get reply will though the GPRS net .but it request the mobile open GPRS
function . Under good GSM signal ,you can get reply though GPRS at once .Meanwhile when your use GPRS
function ,your need set up APN ,user name and password for your tracker . Download this application just visit
APP store or Android market and search "Mobile tracking GPRS "word ,then you will found this application and
install it ,You can begin use .
1 ， Mobile
Mobile
Mobile
Mobile tracking
tracking
tracking
tracking Application
Application
Application
Application Function
Function
Function
Function introduce
introduce
introduce
introduce :
:
:
:
From the interface ,the functions as below :
1, GPS locate
2, LBS locate
3,Tracking( Online Tracking)
4 ， Monitoring ( RAT2
RAT2
RAT2
RAT2 no this function)
5 ， Alarms
6 ， OTHER
2
2
2
2 ，
，
，
， Mobile
Mobile
Mobile
Mobile tracking
tracking
tracking
tracking Application
Application
Application
Application set
set
set
set up
up
up
up :
:
:
:
After download "Mobile tracking "application ,and install it ,Please input the device ID
and password first in "OTHER " function as below :

13
After input the device ID and password ,then your can use "Mobile tracking "Application to
control this device ,Though this function ,you can input different device ID and password and
control difference device when your have more than 1 device .but just download this Mobile
tracking " Application once is enough .
3,
3,
3,
3, Mobile
Mobile
Mobile
Mobile tracking
tracking
tracking
tracking Application
Application
Application
Application function
function
function
function
As below :GPS ,LSB ,TRACKING and Monitoring function display .
GPS locate LBS locate Tracking
Attention: when you use TRACKING function ,please keep the application is open ,the data will
follow device upload interval time to refresh .
All the locate function just click the icon then you will get reply

14
Monitoring: please input the mobile number ,when the tracker gets command will call this
number .(
attention : this number is your mobile number ,not tracker's SIMCARD number
)
There is different alarm functions for customer choose ,just choose the function and follow
the indicate to input content then the function is set up .
Attention:
when you set up the function though this application , it indicates can't connect device ,please
try again ,maybe the GPRS net not stable .

15
Chapter 4: Free tracking Platform
1 ， Welcome
This platform is professional design for Vehicle tracking management service .it fits for our company
all device .the website is www.tracetree.net ,Every device has a unique S/N number and print into
sticker .every device default ID and password is the last 6 number of S/N ,For example: the ID is
" HC0000TR0000004" ,then the ID and password is "000004" ,Meanwhile when the sticker disappear, You can
send command "ID*000000 " to device to check ID .
User can change the password and user info , For example ,Car ID number ,user phone number ,but user
can't change the log in ID ,If you buy this device to tracking your company's car ,and more than 1 pcs ,you
can apply to set up one term ,become the admin to manage all of your company's cars .For this
function ,please contact with supplier or producer.
2.Language Interface
1,
1,
1,
1, Our
Our
Our
Our platform
platform
platform
platform has
has
has
has 8
8
8
8 countries
countries
countries
countries language
language
language
language ,like
,like
,like
,like Chinese
Chinese
Chinese
Chinese ,English
,English
,English
,English ,German
,German
,German
,German French
French
French
French Russian
Russian
Russian
Russian Arabic,
Arabic,
Arabic,
Arabic, Spanish
Spanish
Spanish
Spanish
And
And
And
And Portuguese
Portuguese
Portuguese
Portuguese as
as
as
as below
below
below
below :
:
:
:

16
3.
.
.
.Log in Interface
Website : www.tracetree.net
Choose the language and input the log in ID and password ( the default log in ID and password is
last 6 number of S/N ) ,after log in ,it will change to another page as below :
4. Main Interface

17
Via main page ,the user can set up the function as below :
1.Refresh
2.Reset
3.Change password
4.Log out
5.Add group
6.Add user
7.Check device
8.Tracking
9.LBD locate
10.Command Center
11.Report
12.User info
13.Admin
5, Function

18
1.Refresh
After log in the platform , if load the map is slow ,please press refresh the website.:
2. Reset
If the device can't upload to the server ,maybe the GPRS connect has problem ,so please reset the
device and when you reset the device please ensure it connect with server well :
3.Change password
As below photo ,User can press in the platform ,but attention if your changed password
and forget it ,please offer your tracker S/N to producer or supplier ,they can help your find the password
back .
4.Log out
As below :the Log out function can help customer input the log ID and password again .

19
1.1 Change the device icon
User can choose the different car icon as they want , as below :
5.Add Group
If the user bought a lot of devices and plan to rent different customer ,so the user can set up different
group to manage ,but the Group ID can't change ,the Password ID can be changed device ,as below :

20
6.Add User
Add user can help customer choose the device and add to group that had been set up .as below :
7.Check device info
After user log in and want to check the device info ,please find the device from the left list and press
two times left button of the mouse to check the info, as below :