TRACETREE HC-T1 User manual

1
www.autoleaders.gr
TRACETREE HC-T1 User Manual

2
Contents
Chapter 1: Ready ,Install Begin Use
1. Welcome
2. Standard parts
3，Attention before use
1 SIM card ( Phone card) use instruction
2 Install SIM card
3 Install Device
4，Programme LED indicate
Chapter 2: Function
1 LBS locate
2 SMS locate
3 Link Locate
4 Real time tracking
5 Cancel Real time tracking
6 Add preset number
7 Check Preset number
8 Delete Preset Number
9 Change Password
10 Check Password
11 Default ( Reset)
12 Move Alarm
13 Over Speed Alarm
14 Geo-Fence Alarm
15 Low battery Alarm
16 Engine Off Alarm
17 Cancel All Alarm
18 Upload Interval Set up
19 Time Zone set up
20 Monitoring
21 SOS Alarm
22 Set IP
23 Set APN
24 Set User name and password
25 Check ID

3
Chapter 3 :Mobile Tracking Application Function
1. GPRS version of Mobile Tracking Application function
Download Application From APP and Android Market
Choose Device
GPS locate
LBS locate
Real time tracking
Monitoring
Engine Off
Chapter 4: Free tracking Platform Function
Welcome
Language Interface
Log in Interface
Main Interface
Function
Attention
FAQ
Specification
After sale service

4
Chapter 1: Ready ,Install ,Begin Use
Thank for using HC-T1 Potable CAR GPS tracker , This device built in GSM and GPS module,It
can receive GPS signal to get position and send by GPRS （belongs GSM module) to our
server ,User can real time tracking the car and get position though the internet .Any kind
Notebook or smart phone can online tracking it ,In additional, Our company engine one Mobile
tracking application basic the IOS and Android software .User can visit APP or Android market
and download this application , it can use to control the device . This device is smaller
design ,easy installation and suit for vehicle tracking ,Management and Anti-theft.
Please visit our Free Tracking platform www.tracetree.net and choose the language as your
want ,when your first time to log in the platform ,the default log in ID and password is the last 6
S/N number of device . (Every tracker has unique S/N number stick into the device
background ,the log in ID can't be changed ,but the password can be changed)
The device can be used to company vehicles, buses, taxis, trucks, moving equipments,
transportations etc. The user can add the group for their customer by themselves or request supplier
support .
Free Tracking platform : www.tracetree.net , Demo ID and password : 123456
Because the tracker built in GSM module ,attention please follow the rule ,Don't use the tracker
near the hospital or gas station ,it maybe danger.

5
1. Standard Parts
2.Before use
1 SIM Card( Phone Card) introduce :
This device need GSM net SIM Card ,Before install the SIM card ,please open the Caller ID ,SMS and
GPRS function service . After install the SIM card ,the SIM card number is the Tracker Number ,when your use
the tracker to locate ,check ,set up function ,all set up need send command to this number ,so we call it
tracker number .
■This device only use 2G GSM net ,it can't work on CDMA or 3G GSM net
■Please confirm the PIN code had been closed before install the SIM Card.( If you use it in mobile no
need input any password ,so it means has been closed )
■Please turn off the tracker before install or take off the SIM Card.
2 Install SIM Card :
As below : First remove the back cover ,Remove the battery exposing the SIM card socket. ,Push the
SIM card metal cover up to release the socket and place the SIM card into the socket (ensure that the SIM
card contact is facing down). Cover the SIM card metal cover and push to the “LOCK”position to lock the
SIM card, and then put the battery in and lock the battery cover.
ON/OFF
Button
SOS button
Wirings

6
3. Install Device:
■After install SIM card ,please connect the device with the car battery.(12V-35V )
■If your don't connect the car battery ,the device has its backup battery ,it can keep work 2-5 hours .
■Attention please the device recharge voltage is 12-35V ,it will be danger if your connect the voltage
higher than this range. Meanwhile please don't broken the fuse. When your use this device first time and
there is no anymore battery ,please connect with car battery ,After 20 minutes it will work stable ,the tracker
locate will get a little longer in first time
Red- 12-35V car battery
Black- GND( Car body)
Green -Cut Relay Driving (Immobilizer Control)
White- External SOS button

7
Power ON/OFF:
Power on :Power on : Prees the or connect with car battery will automatic power on .
Power on :when the device power off ,press the and hold on ,until the Yellow LED light ,releae the
button ,the tracker is power on and search GSM GPS signal .Until Yellow and Red LED flash means the tracker
works well.
Power off: press until Yellow LED flash over then release the button ,it will power off.
5. Programme LED indicate
Red LED off Yellow LED continue on : Power on ,search GSM net
Red LED on Yellow LED on : GSM signal well, GPS signal weak,GPRS can't work
Red LED on Yellow LED flash: GSM signal well, GPS signal well,GPRS can't work
Red LED Flash Yellow LED on : GPRS work well ,GPS signal weak
Red LED flash Yellow LED off: GPRS work well ,GPS signal well ,GPRS connect well.
Green LED off ,Red LED off : Power off

8
Chapter 2: Function

9
1,Command List

10
Function
Fix Command format
Reply
Remark
LBS locate
LBS*000000
LBS address
If command or PW is wrong will
indicate your wrong command
SMS Locate
SMS*000000
Long and Lat
Link Locate
Link*000000
Google link
Real time
tracking
tracking*000000 every 1 minutes will
send locate information
Long and Lat
Cancel Real
time tracking
Canceltracking*000000
Cancel OK
Add Preset
Number
AddNumber*000000*A*13828819646
Add B or C same command
Add Number OK
Check preset
Number
Check*000000
A: 13828819646；
B：13823764594；
C：15814016516
Delete phone
Number
DeleteNumber*000000*A
Delete OK
Change PW
ChangePW*000000*123456
New PW：123456
Check PW
CheckPW
PW：000000
Default
First Turn off the tracker ,after off ,press the SOS button and press ON/OFF button ,then the Red
LED will flash ,after flash stop then release all button ,the tracker back to default .
Move Alarm
Movealarm*00000
0
Move alarm OK
If command or PW is wrong will
indicate your wrong command
Over Speed
Alarm
OverSpeed
*000000*50
Over Speed OK
Geo-
Fence Alarm
Overarea*000000*
100
Over area OK
Low Battery
Alarm
Only Preset Number can get alarm SMS
Engine Off
Alarm
EngineOff*000000
Engine Off OK
Only preset Number can
set up Engine Off ,
Cancel All
alarm
CancelAll*000000
Cancel All alarm OK
One Preset Number can get
alarm message
Upload interval
set up
INTERVAL*000000*
000
Set Upload Interval with detail sec
The last 000 means from 015-999 sec
can be set up ,the upload time can't
lower 15 sec

11
Attention: 1, Upon all command send by SMS ,if your can't get reply by SMS ,it means the GSM net is busy or
not stable .the default password is "000000" ,Every command must add "*" mark.
2.There is no any preset number before selling ,Please add preset number ,then you can set up change
Password and check PW function .please reference the command list to set up related function .
3，Please attention Tracking function ,If you set up this function , the tracker will send locate information
to your mobile every 1 minutes .This function will cost more SMS charge.
4，If GPRS not stable ,GPS signal well ,the Tracker will storage GPS data and upload the data to the server
when GPRS stable .
5,If the tracker not set preset number ,All function can be set up by strange number except Engine off
alarm ,SOS alarm .
6，If there is space before the command or there is space during the command ,the tracker only reply
wrong command ,it will not answer the detail reason .
7.The tracker ID is printed on the label of the tracker, the S/N number on the label is also the ID
number. If the label is missing, send an SMS “ID*000000”to tracker, in which, “ID”is the fixed command
and “000000”is the password. Having successfully been made, there will be a SMS “ID: HC0000TR0000004”,
in which, “HC0000TR0000004”is the ID and every tracker corresponds to the only number. This number is
used to differentiate the tracking uploaded to the website from others.
8，Turning off the engine is very dangerous when the car is moving, this will make the car difficult to
control and maybe cause an accident. It is recommended to connect the relay cut the start motor wire,
SOS
Only Preset Number can get SOS SMS
Time zone
time*000000*+00：
00
Time with battery volume
Last 00:00 explain ,First 00
means 1-13 hours ,last00 means
minutes ,only can set up 30
minutes.
Set IP
IP*000000*121.37.
59.109,2088
IP*000000*121.37.59.109,2088
If use our platform ,No need set
up IP
Set APN
APN*000000*apnn
ame
APN:apnname & wrong Command
APN is needed set up when u
use GPRS function
Set User
Name and
PW
USERNAME*00000
0*username*passw
ord
Username:username,
Password:password
If set up GPRS need set up the
user name or PW please set
them
Check ID
ID*000000
ID:xxxxxx
If command or PW is wrong will
indicate your wrong command

12
ensure the car’s engine can not be started again.
9. After default has been set, all IP / APN / GPRS / TIME ZONE settings are reverted back to default, all
preset phone numbers are deleted and the password is changed to 123456. All the alarm settings are
canceled, if the IP/APN/GPRS name& password/TIMEZONE are changed. You need to set these again by
sending an SMS.
Chapter 3 :Mobile Tracking Application Function

13
GPRS version -- Mobile Tracking Application introduce:
This mobile control software named Mobile tracking ,it can work in IOS and Android software mobile . This
kind mobile tracking has two kind version ,one version is SMS reply ,another one is GPRS reply .if use GPRS
version ,so all command send and get reply will though the GPRS net .but it request the mobile open GPRS
function . Under good GSM signal ,you can get reply though GPRS at once .Meanwhile when your use GPRS
function ,your need set up APN ,user name and password for your tracker . Download this application just visit
APP store or Android market and search "Mobile tracking GPRS "word ,then you will found this application and
install it ,You can begin use .
1，Mobile tracking Application Function introduce :
From the interface ,the functions as below :
1, GPS locate
2, LBS locate
3,Tracking( Online Tracking)
4，Monitoring
5，Alarms
6，OTHER

14
2，Mobile tracking Application set up :
After download "Mobile tracking "application ,and install it ,Please input the device ID and
password first in "OTHER " function as below :
After input the device ID and password ,then your can use "Mobile tracking "Application to
control this device ,Though this function ,you can input different device ID and password and
control difference device when your have more than 1 device .but just download this Mobile
tracking " Application once is enough .
3, Mobile tracking Application function
As below :GPS ,LSB ,TRACKING and Monitoring function display .

15
GPS locate LBS locate Tracking
Attention: when you use TRACKING function ,please keep the application is open ,the data will
follow device upload interval time to refresh .
All the locate function just click the icon then you will get reply
Monitoring: please input the mobile number ,when the tracker gets command will call this
number .( attention : this number is your mobile number ,not tracker's SIMCARD number )

16
There is different alarm functions for customer choose ,just choose the function and follow the
indicate to input content then the function is set up .
Attention: when you set up the function though this application , it indicates can't connect device ,please try
again ,maybe the GPRS net not stable .

17
Chapter 4: Free tracking Platform
1，Welcome
This platform is professional design for Vehicle tracking management service .it fits for our company all
device .the website is www.tracetree.net ,Every device has a unique S/N number and print into sticker .every
device default ID and password is the last 6 number of S/N ,For example: the ID is "HC0000TR0000004" ,then
the ID and password is "000004" ,Meanwhile when the sticker disappear, You can send command
"ID*000000 " to device to check ID .
User can change the password and user info , For example ,Car ID number ,user phone number ,but
user can't change the log in ID ,If you buy this device to tracking your company's car ,and more than 1
pcs ,you can apply to set up one term ,become the admin to manage all of your company's cars .For this
function ,please contact with supplier or producer.
2.Language Interface
1, Our platform has 8 countries language ,like Chinese ,English ,German French Russian Arabic,
Spanish And Portuguese as below :

18
3.Log in Interface
Website :www.tracetree.net, Choose the language and input the log in ID and password ( the default
log in ID and password is last 6 number of S/N ) ,after log in ,it will change to another page as below :
4. Main Interface

19
Via main page ,the user can set up the function as below :
1.Refresh
2.Reset
3.Change password
4.Log out
5.Add group
6.Add user
7.Check device
8.Tracking
9.LBD locate
10.Command Center
11.Report
12.User info
13.Admin

20
5, Function
1.Refresh
After log in the platform , if load the map is slow ,please press refresh the website.:
2. Reset
If the device can't upload to the server ,maybe the GPRS connect has problem ,so please reset the device
and when you reset the device please ensure it connect with server well :
3.Change password
As below photo ,User can press in the platform ,but attention if your changed password
and forget it ,please offer your tracker S/N to producer or supplier ,they can help your find the password back .
4.Log out
As below :the Log out function can help customer input the log ID and password again .