Tractor Supply D-DN121-2 Operating instructions

Production Number: XXXXXXXX Made In China 1 / 4
ASSEMBLY INTRUCTIONS
ITEM#：D-DN121-2 Table
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST. You may email to [e-mail] or visit
www.sunjoyonline.com to place your order or fax your parts replacement order form (which is included in the
packaging) together with your purchase receipt to 1 [phone] for assistance.

Production Number: XXXXXXXX Made In China 2 / 4
PARTS LIST
Label
Description
QTY
A
Umbrella hole cover
1
B
Top glass
1
C
Top frame
1
D
Leg
4
E
Below fixed frame
1
F
Support
2
HARDWARE PACK
Label
Description
QTY
AA
Bolt M6×25
24
BB
M6 Flat washer
24
CC
Cap
24
DD
Hex key M6
1
ASSEMBLY STEPS
Step 1:
Put bolt (AA) through flat
washer (BB), attach below fixed
frame (E) to leg (D) by hex key
(DD). Do not lock tightly. Put on
cap (CC) after locking all the
bolts tightly.
Step 2:
Put bolt (AA) through flat washer
(BB), attach leg (D) to top frame
(C) by hex key (DD). Do not lock
tightly. Put on cap (CC) after
locking all the bolts tightly.

Production Number: XXXXXXXX Made In China 3 / 4
Step 3:
As Fig 1 shows, put bolt (AA) through flat washer (BB), attach below fixed frame (E) to support (F) by hex key
(DD). As Fig 2 shows, put bolt (AA) through flat washer (BB), attach support (F) to top frame (C) by hex key (DD).
Lock all bolts tightly, then put on cap (CC).
Step 4:
Turn the table upright, put top glass (B) on top frame (C), then put umbrella hole cover (A) onto umbrella hole.
Assembly finished.
Fig1
Fig 2

Production Number: XXXXXXXX Made In China 4 / 4
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of twelve
(12) months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.

Production Number: XXXXXXXX Made In China 1 / 3
ASSEMBLY INTRUCTIONS
ITEM#：D-DN121-2 Chair
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST. You may email to [e-mail] or visit
www.sunjoyonline.com to place your order or fax your parts replacement order form (which is included in the
packaging) together with your purchase receipt to 1 [phone] for assistance.

Production Number: XXXXXXXX Made In China 2 / 3
PARTS LIST
Label
Description
QTY
A
Back
1
B
Left armrest
1
C
Right armrest
1
D
Seat board
1
E
Back cushion
1
F
Seat cushion
1
HARDWARE PACK
Label
Description
QTY
AA
Bolt M6×20
10
BB
M6 Spring washer
10
CC
M6 Flat washer
10
DD
Cap
8
EE
Hex key M6
1
FF
Foot pad (pre-assembled)
4
ASSEMBLY STEPS
Step 1:
Attach seat board (D) to back
(A) by bolt (AA), spring washer
(BB), flat washer (CC) and hex
key (EE). Do not lock tightly.
Put on cap (DD) after locking all
bolts tightly.
Step 2:
Attach armrest (B/ C) to seat
board (D) by bolt (AA), spring
washer (BB), flat washer (CC)
and hex key (EE). Lock all bolts
tightly. Then put cap (DD) on.

Production Number: XXXXXXXX Made In China 3 / 3
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of twelve
(12) months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Step 3:
Put bolt (AA) through spring washer (BB),
flat washer (CC), attach armrest (B, C) to
back (A) by hex key (EE). Do not lock
tightly.
Step 4:
Put seat cushion (F) onto seat board, stick
hook-and-loop fasteners, put back cushion
(E) on back.

Production Number: XXXXXXXX Made In China 1 / 4
ASSEMBLY INTRUCTIONS
ITEM#：D-DN121-2 Swivel
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST. You may email to [e-mail] or visit
www.sunjoyonline.com to place your order or fax your parts replacement order form (which is included in the
packaging) together with your purchase receipt to 1 [phone] for assistance.

Production Number: XXXXXXXX Made In China 2 / 4
PARTS LIST
Label
Description
QTY
A
Back
1
B
Left armrest
1
C
Right armrest
1
D
Seat board
1
E
Base
1
F
Back cushion
1
G
Seat cushion
1
HARDWARE PACK
Label
Description
QTY
AA
Bolt M6x20
10
BB
M6 Spring washer
10
CC
M6 Flat washer
10
DD
Screw M8x40
4
EE
Screw M8x35 (pre-assembled)
4
FF
M8 Nut( 4 pre-assembled)
8
GG
M8 Spring washer (4 pre-assembled)
8
HH
M8 Flat washer ( 4 pre-assembled)
8
II
Big washer (2 pre-assembled)
6
JJ
Spring steel plate (pre-assembled)
2
KK
Cap
8
LL
Wrench M8
2
MM
Hex key M6
1
NN
Foot pad (pre-assembled on E)
6
ASSEMBLY STEPS
Step 1:
Attach seat board (D) to back
(A) by bolt (AA), spring washer
(BB), flat washer (CC) and hex
key (MM). Do not lock tightly.
Put cap (KK) on after locking all
bolts tightly.

Production Number: XXXXXXXX Made In China 3 / 4
Step 3:
Put bolt (AA) through spring washer (BB), flat
washer (CC), attach armrest (B, C) to back (A)
and hex key (MM). Do not lock tightly.
Step 4:
Put hole of base (E) and hole of
assembled frame A (BCD) on
the same line, put screw (DD)
through big washer (II), spring
steel plate (JJ), big washer (II),
flat washer (HH), spring washer
(GG), attached nut (FF) by
wrench (LL). Lock all bolts
tightly by wrench (LL). tightly.
Step 2:
Attach armrest (B/C) to seat board
(D) by bolt (AA), spring washer
(BB), flat washer (CC) and hex
key (MM). Put on cap (KK) after
locking all bolts tightly.

Production Number: XXXXXXXX Made In China 4 / 4
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of twelve
(12) months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Step 5:
Put seat cushion (G) onto seat
board, stick hook-and-loop
fasteners, put back cushion (F)
on back. Assembly finished.