Haworth Zody User manual

Zody®
User Guide
45°
Front View
Detail(s)
Side View Detail
3"(76mm)
Seat Depth
Adjustment
(+) Tension (-)
(-)
(+)
Pneumatic Height Adjustment
Pneumatic height adjustment is used to adjust the seat to fit
different user heights. (1) Pull the lever up and lift the body out of
the chair to raise the seat. To lower the seat, remain seated and
pull the lever up.
1
Seat Depth Adjustment
Seat depth adjustment moves the seat pan to accommodate
different leg lengths. Pull out and up on the lever at a 45 degree
angle, and slide the seat pan front to back.
2
Tilt Tension Control
Tilt tension adjusts the force necessary for a user to recline in the chair. Turn
the crank forward (clockwise) to tighten the tension and backward
(counter-clockwise) to loosen the tension. Once the tension has reached
its maximum in either direction, do not force the crank further.
3
13
2
Activate
Release
Back Stop
Back stop allows users the choice of selecting an upright position or
limiting the amount of recline. (1) Recline to the desired stopping position
and (2) push down on the lever to activate the back stop. (3) Pull up on the
lever to release the back stop.
4
Page: 1 of 2
5"
21"
16"
5”(127mm)
16”(406mm)
21”(533mm)
1

Forward Tilt
Forward tilt allows users to sit forward in the chair during task-intensive
work. (1) To activate, push down on the for- ward tilt lever, (2) recline and (3)
then lean forward; pull up and recline to release.
Arms
(1) Arm height adjustment raises and lowers the arms to
keep the users shoulder in a neutral posture. To change
the height of the armrest, pull up on the lever and slide
the armrest up or down.
(2) Armrest side-to-side adjustment accommodates users
with various shoulder width. Grasp the armrest cap and
slide it side-to-side as needed.
(3) Armrest front-to-back adjustment allows users to get
closer to their work surface while maintaining effective
use of the backrest. Grasp the armrest and slide it
forward or 3"(76mm) backward as needed.
(4) Armrest pivot allows the user to have proper support
of the forearm when mousing or keying. To change the
angle of the armrest, grasp the armrest cap and rotate
the front of the armrest toward or away from the body.
PAL® Back System & Lumbar Adjustment
Lumbar height adjustment allows the user to position
the lumbar pad in the lumbar curve (the small_ of the
users back). Pull up on the handles to raise the lumbar
pad; push down to lower it.
Lumbar support helps maintain the lumbar curvature
(lordosis) in the spine of the lower back when the user is
seated. Rotate the handles up to increase the amount of
support and down to decrease the amount of support.
Each handle can be rotated independently.
1
2
3
Activate
Release
PAL® Back System:
*Optional lumbar support with
patended asymmetrical adjustment,
providing low-back support.
*Passive pelvic support,
Provides low-back support.
2
3
4
Zodey-General Specs & Adjustability-02
Seat Depth
3"
Upper Back Torsional Movement
PAL Back System
1
2
Zodey-General Specs & Adjustability-03
Arm Height Tilt with Back Stop (6 Positions)
Forward Tilt Back Stop/Forward Tilt
1
4”(102mm)
5
6
7
Headrest Adjustment
Headrest provide user thoracic support with 2.5”(64mm)
adjustment range. Grasp the headrest with both hands,
pull up or push down to the position preferred, there is 7
position stop which cover wide range of user needs.
8
Page: 2 of 2