Tradition Capture SC74 Space Copenhagen 2022 User manual

Congratulations with you new Capture hook, designed
in 2022 by Space Copenhagen. We hope you will enjoy
using this product and follow these instructions to
ensure correct assembly. If you have any questions or
comments, please do not hesitate to contact us by mail
on:
[email protected]
Capture SC74 & SC75
Space Copenhagen
2022
User instructions

Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly. Do not modify this product in
any way.
Contents
A - Hook
B- Mounting plate (pre-mounted on the hook)
C- Screws x 2
D- Wallplug x 2
E- Set screw x 1 (pre-mounted on the hook)
F- Allen key
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The coat hook is only intended for indoor use.
*Please note that the wall plugs (D) are only intended
for stone walls, if the product is going to be hung on a
different type of wall, please use plugs that are specialized
for this.
Cleaning instructions
Powder coated metal: It is recommended only to use a
soft dry cloth to clean powder coated surfaces but in case
more severe cleaning is necessary, a soft cloth wrung
in lukewarm water can be carefully applied. Always dry
immediately after cleaning with a soft dry cloth. Avoid
using abrasive cleaning agents or aggressive cleaning
detergents on powder coated surfaces as this may
permanently damage the surface.
Lacquered wood: For daily care it is recommended to
dust the furniture with a soft cloth. Lacquered wood can
be cleaned with a soft cloth wrung in a mild solution of
lukewarm water and a universal cleaning detergent. Avoid
use of abrasive cleaning agents and aggressive cleaning
detergents as this will damage the surface of the lacquered
wood. Avoid placing wooden furniture in direct sunlight,
excessive heat or humidity.
Step 1
Remove the mounting plate (B) from the hook (A)
by loosening the set screw (E) clockwise with the
Allen key (F)
Step 2
Place the mounting plate (B) in the desired space on
the wall. Make sure it is leveled by using a spirit level.
Mark hole placement, remove the mounting plate
and drill holes on the marked spots.
Insert the wall plugs (D) and fasten the mounting
plate with the screws (C).
A B
D
C
E
F
Capture SC74 & SC75
Space Copenhagen
2022

Step 3
Attach the hook (A) on the mounting plate (B)
and fasten the set screw (E) counterclockwise with
the Allen key (F).
andtradition.com