Tradition Votive AV20 Anderssen & Voll 2022 User manual

Congratulations with your Votive candleholder
designed in 2022 by Anderssen & Voll. We hope
you will enjoy using this product and follow these
instructions to ensure correct installation. If you
have any questions or comments, please do not
hesitate to contact us by mail on:
in[email protected]
Votive AV20
Anderssen & Voll
2022

Step 1
Mark the desired placement of
the candleholder with a pencil.
Step 2
Drill a hole on the appointed
mark and insert a plug.
Step 3
Install a screw in the plug.
Step 4
Hang the candleholder on the
screw, by inserting the head of
the screw into the circle hole
on the back of the candleholder.
Slide the candleholder down
so the screw is placed in the
narrow part of the hole.
A
Please read these instructions carefully and retain
them for future reference to ensure that the product
is used correctly. For your own safety, please study
each step of this instruction manual first. &Tradition
is not responsible for any faults or damages caused by
not following these instructions correctly.
Contents
AVotive candleholder
Tools needed
- Pencil
- Electric drill
- Screwdriver
- Plug & screw
Safety precautions
- Keep product well out of children’s reach
- The candleholder is only intended for indoor use.
Cleaning instructions
Wipe the candleholder with a soft, damp sponge or
cloth. Do not use any abrasive cleaning tools such as
steel wool, scouring sponges or sti brushes. Never use
strong cleaning agents such as white spirit, terpentine,
household glass cleaner or cellulose thinners on the
candleholder. To remove wax, use hot water and wipe
immediately with a soft cloth.

andtradition.com