Traeger HOMESTEAD TFB52Q User manual

ASSEMBLY GUIDE
Please read this entire manual before installation and use of this pellet fuel-burning appliance. Failure to follow these instructions could result in property
damage, bodily injury, or even death. Contact your local building or fire ocials about restrictions and installation inspection requirements in your area.
WARNING!
MANY PARTS OF THE GRILL WILL BECOME VERY HOT DURING OPERATION. CARE MUST BE TAKEN TO AVOID BURNS,
BOTH DURING OPERATION AND AFTERWARDS, WHILE THE GRILL IS STILL HOT.
Never leave the grill unattended when young children are present.
Never move the grill when it is operating.
Let the grill cool completely before moving or attempting to transport.
A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES)
BETWEEN COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE
INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
TFB52QCE/QSE/QPE/QZE
TRAEGER PELLET GRILLS LLC
1215 E. WILMINGTON AVE
SALT LAKE CITY, UT 84106
TRAEGERGRILLS.COM
HOMESTEAD
TFB52Q

Probe
Selector
Probe1
Probe2
BLISTER PACK PARTS NEEDED
Hex Key (1 pc)
Screwdriver (1 pc)
Wrench (1 pc)
BWashers: 5/16 (16 pcs)
IHex Nuts: 1/4-20 (2 pcs)
A
Bolts: 5/16-18x2.5 (6 pcs)
FWashers: 1/4 (6 pcs)
DHex Nuts: 5/16-18 (8 pcs)
16
8
9
E
Bolts: 5/16-18x3.5 (2 pcs)
CSpring Washers: 5/16 (8 pcs)
GRAB THE 6-PACK, GET THE TOOLS, CUE THE RADIO —
IT’S ALMOST TRAEGER’ING TIME.
1
7
Optional Equipment:
6-Pack
PARTS LIST
WARNING!
• When operating this grill under overhead combustibles, a MINIMUM
of 40 inches (102 cm) is required.
• When operating this grill, maintain a MINIMUM distance of 18 inches
(45.7 cm) from the grill to combustibles.
IMPORTANT!
• The grill is very heavy. Always lif the grill with TWO people.
6
F
CALL
SERVICE
225
180
325
275
375Smoke
ShutDown
Cycle
High
Temperature
Power
OFF
ON
40.00"
(102 cm)
18.00"
(45.7 cm)
18.00"
(45.7 cm)
2
3
4
5
10 11
12
15
14
13
(Hopper grate
inside hopper)
HBolts: 1/4-20x.75 Phillips (4 pcs)
GHandle Insulation (2 pcs)
JShoulder Bolts: 1/4-20 (4 pcs)
Probe
Selector
Probe1
Probe2
BLISTER PACK PARTS NEEDED
Hex Key (1 pc)
Screwdriver (1 pc)
Wrench (1 pc)
BWashers: 5/16 (16 pcs)
IHex Nuts: 1/4-20 (2 pcs)
A
Bolts: 5/16-18x2.5 (6 pcs)
FWashers: 1/4 (6 pcs)
DHex Nuts: 5/16-18 (8 pcs)
16
8
9
E
Bolts: 5/16-18x3.5 (2 pcs)
CSpring Washers: 5/16 (8 pcs)
GRAB THE 6-PACK, GET THE TOOLS, CUE THE RADIO —
IT’S ALMOST TRAEGER’ING TIME.
1
7
Optional Equipment:
6-Pack
PARTS LIST
WARNING!
• When operating this grill under overhead combustibles, a MINIMUM
of 40 inches (102 cm) is required.
• When operating this grill, maintain a MINIMUM distance of 18 inches
(45.7 cm) from the grill to combustibles.
IMPORTANT!
• The grill is very heavy. Always lif the grill with TWO people.
6
F
CALL
SERVICE
225
180
325
275
375Smoke
ShutDown
Cycle
High
Temperature
Power
OFF
ON
40.00"
(102 cm)
18.00"
(45.7 cm)
18.00"
(45.7 cm)
2
3
4
5
10 11
12
15
14
13
(Hopper grate
inside hopper)
HBolts: 1/4-20x.75 Phillips (4 pcs)
GHandle Insulation (2 pcs)
JShoulder Bolts: 1/4-20 (4 pcs)
Probe
Selector
Probe1
Probe2
BLISTER PACK PARTS NEEDED
Hex Key (1 pc)
Screwdriver (1 pc)
Wrench (1 pc)
BWashers: 5/16 (16 pcs)
IHex Nuts: 1/4-20 (2 pcs)
A
Bolts: 5/16-18x2.5 (6 pcs)
FWashers: 1/4 (6 pcs)
DHex Nuts: 5/16-18 (8 pcs)
16
8
9
E
Bolts: 5/16-18x3.5 (2 pcs)
CSpring Washers: 5/16 (8 pcs)
GRAB THE 6-PACK, GET THE TOOLS, CUE THE RADIO —
IT’S ALMOST TRAEGER’ING TIME.
1
7
Optional Equipment:
6-Pack
PARTS LIST
WARNING!
• When operating this grill under overhead combustibles, a MINIMUM
of 40 inches (102 cm) is required.
• When operating this grill, maintain a MINIMUM distance of 18 inches
(45.7 cm) from the grill to combustibles.
IMPORTANT!
• The grill is very heavy. Always lif the grill with TWO people.
6
F
CALL
SERVICE
225
180
325
275
375Smoke
ShutDown
Cycle
High
Temperature
Power
OFF
ON
40.00"
(102 cm)
18.00"
(45.7 cm)
18.00"
(45.7 cm)
2
3
4
5
10 11
12
15
14
13
(Hopper grate
inside hopper)
HBolts: 1/4-20x.75 Phillips (4 pcs)
GHandle Insulation (2 pcs)
JShoulder Bolts: 1/4-20 (4 pcs)

Traeger’ing is more fun with friends! (No, really, you will need two people to lif the grill.)
In this step: 12In this step: 34
A x 4 B x8 C x 4 D x 4 From Side: E x 2 B x 4 C x 2 D x 2
READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THE GRILL
INSTALL LEGS
2
2A 2B 2C
NOTE: When fastening legs to grill body, fasteners
assemble in this order: A or E B Leg B C D
NOTE: To protect the finish of the
grill, use the plastic bag covering the
grill as a barrier between grill and
cardboard when assembling the legs.
NOTE: You should assemble grill on a clean, flat surface, as you will need to lay
it on its back as well as its front at dierent times during assembly.
Grill is very heavy. Always lif grill
with two people.
UNBOX GRILL AND
REMOVE CONTENTS
1
Probe
Selector
Probe1
Probe2
From Front/Rear:
A
x 2
B
x 4
C
x 2
D
x 2

(continued)
ATTACH HANDLE AND CHIMNEY ASSEMBLY
Probe
Selector
Probe1
Probe2
In this step: 9 10
In this step: 14 J x 4,
repeat on other side.
In this step: 5 H x 2 G x 2 F x 2
YOU ARE READY TO SEASON YOUR GRILL AND GET TRAEGER’ING!
Refer to your Owner’s Manual for operation instructions.
In this step: 13 + 1/4-20 x 4,
repeat on other side.
NOTE: Bolts installed in grill body.
ATTACH FRONT SHELF ASSEMBLY
3
4
5
4A 4B
In this step: 15
THIS WILL REQUIRE TWO PEOPLE.
5C 5D
3B
3A
In this step: 6 7 8 H x 2 F x 4 I x 2
3C
In this step: 12
In this step: 11
5A
5B
PLACE INTERIOR PARTS
AND HANG BUCKET
5