
rock prodigy natural
5
mounting instructions (con’t)
STEP 5: Inspect your installation.
Verify that all screws on the mounting board and Natural are tightened and
that the attachment is secure. The Natural should not move under load.
optional steps if using a mounting board
STEP 6: Take measurements and cut mounting board to size.
For the mounting board, Trango recommends smooth ¾” plywood, at least 12” x 36”
in size, or a 36” long piece of 2x10” lumber.
STEP 7: Attach the mounting board securely to the wall.
Make sure that you have a very secure connection to the supporting structure behind
the drywall (studs in most cases). Use no fewer than six 3” x #8 wood screws.
Remember that the forces on the Natural will often exceed your bodyweight.
Now RETURN TO STEP 3 to complete installation
Warning: It is your responsibility to choose an appropriate training location, free from other
obstacles or risks. Consider padding the area under and around you while using the Natural. It is
your responsibility to perform the installation correctly on a structure that is capable of supporting
forces in excess of your own body weight, or seek assistance from a qualied individual to perform
the mounting and evaluate the chosen mounting location. Failing to properly mount the Natural
could result in serious injury or death. Trango highly recommends performing research on multiple
training methods and theories before using this product. Failure to understand proper training
principles (such as warming up before every workout) could result in serious injury. WARNING!
BY USING THIS PRODUCT, YOU ACCEPT ALL RISK AND RESPONSIBILITY FOR ANY INJURY,
DAMAGE OR DEATH THAT MAY RESULT. Trango disclaims all liability for all consequence, damage,
injury, or death that arises out of or relates to, directly or
indirectly, the use of the Rock Prodigy Natural.
Contact: Refer to www.trango.com with questions or to nd additional information.
completed installation
USE AND CARE: Clean hands before use to minimize excess dirt buildup. The Rock
Prodigy Natural is designed to be used with chalk and cleaned between sessions with
a natural ber brush. If chalk & dirt have built up you can clean the board with a more
aggressive brushing or via a light sanding using 120+ grit sandpaper.