Trans-Tek TMB-2288-BT User manual

Thank you very much for selecting TRANSTEK Blood Pressure Monitor
TMB-2288-BT.
Please read the user manual carefully and thoroughtly so as to ensure the
safe usage of this product, keep the manual well for further reference in
case you have problems.
User Manual
Version: A/0
Guangdong Transtek Medical Electronics Co., Ltd.
Zone A, No.105, Dongli Road, Torch Development
District, 528437 Zhongshan, Guangdong, China
Blood pressure monitor
Model: TMB-2288-BT

FCC STATEMENT..............................................................................................................36
INTRODUCTION..................................................................................................................2
General Description
Indications for Use
Measurement Principle
Receiving and Inspecting your Monitor
Safety Information
Display and Symbols
Name of Each Part
Contents/Product Includes
BEFORE YOU START..........................................................................................................9
Choice of Power Supply
Installing and Replacing the Batteries
Setting the Date, Time and Voice
Setting a user ID
Pair a smart device with the monitor
MEASUREMENT................................................................................................................16
Applying the cuff
Start a measurement
DATA MANAGEMENT........................................................................................................20
Recall the Records
Delete the Records
INFORMATION FOR USER................................................................................................25
Tips for measurement
Maintenances
ABOUT BLOOD PRESSURE.............................................................................................27
What are systolic pressure and diastolic pressure?
What is the standard blood pressure classification?
Irregular heartbeat detector
Why does my blood pressure fluctuate throughout the day?
Why do I get a different blood pressure at home compared to the hospital?
Is the result the same if measuring on the right arm?
TROUBLESHOOTING........................................................................................................30
SPECIFICATIONS..............................................................................................................31
AUTHORIZED COMPONENT ...........................................................................................32
CONTACT INFORMATION................................................................................................32
EMC GUIDANCE................................................................................................................33
FCC STATEMENT..............................................................................................................36
ID ISED...............................................................................................................................37

Table of Contents
CATALOGUE

 
General Description
INTRODUCTION INTRODUCTION
Indications for Use
Safety Information
Measurement Principle
FEATURES:
• 124 mm × 76 mm Digital LCD display
• Systolic, Diastolic Blood Pressure & Pulse Display
• Date / Time Indication
• Irregular Heartbeat detection
• 2 × 250 memory storage, Guest mode available
• Up-to-date measuring-during-inflation technology
Check that the device packaging has not been tampered with and make sure
that all contents are present. Before use, ensure that there is no visible
damage to the device or accessories and that all packaging material has
been removed. If you have any doubts, do not use the device and contact
your retailer or the specified Customer Services address.
Receiving and Inspecting your Monitor
This Blood Pressure Monitor is a digital monitor intended for use in measuring
blood pressure and pulse rate with arm circumference ranging from
FPWRFPDERXWôÝòÝFPWRFPDERXWôÝòÝ
FPWRFPDERXWôÝôÝ
It is intended for adult, home use.
The device can be used to detect irregular pulse rate.
2QO\WKHPDWFKHGFXIIRIFPWRFPDERXWôÝôÝLVDSSOLFDEOHWR
SUHJQDQWZRPDQLQFOXGLQJSUHHFODPSVLDSDWLHQWVDQGGLDEHWLFSDWLHQWV
The symbols below might be in the user manual, labeling or other
component. They are the requirement of standard and using.
Thank you for selecting TRANSTEK arm type blood pressure monitor
70%%77KHPRQLWRUIHDWXUHVEORRGSUHVVXUHPHDVXUHPHQWSXOVH
rate measurement and the result storage.
The design provides you with two years of reliable service.
This product uses the Oscillometric Measuring method to detect blood
pressure. Before every measurement, the unit establishes a “zero
pressure” equivalent to the atmospheric pressure. Then it starts inflating
the arm cuff, meanwhile, the unit detects pressure oscillations generated
E\EHDWWREHDWSXOVDWLOHZKLFKLVXVHGWRGHWHUPLQHWKHV\VWROLFDQG
diastolic pressure, and also pulse rate.
Manufacturer
Serial Number
Type BF applied part
Direct Current
The symbol indicates that the product should not be discarded
as unsorted waste but must be sent to separate collection
facilities for recovery and recycling.
Recyclable
Caution
Indicates that caution is necessary when operating the device or
control close to where the symbol is placed, or that the current
situation needs operator awareness or operator action in order
to avoid undesirable consequences.
Date of manufacture
For indoor use only Class II Equipment
MD
Medical Device
Refer to instruction manual/booklet
To signify that the instruction manual/ booklet must be read.
Note: The background color of the symbol is blue.
MR Unsafe
To identify an item which poses unacceptable risks to the patient,
medical staff or other persons within the MR environment.

 
INTRODUCTIONINTRODUCTION
Precaution
7KLVGHYLFHLVLQWHQGHGIRULQGRRUKRPHXVHDQGLVQRWLQWHQGHGIRUVHOIXVHLQSXEOLFDUHDV
* This device is portable, but it is not intended for use during patient transport.
* This device is not suitable for continuous monitoring during medical emergencies or operations.
7KLVGHYLFHLVLQWHQGHGIRUQRQLQYDVLYHPHDVXULQJDQGPRQLWRULQJRIDUWHULDOEORRGSUHVVXUH
It is not intended for use on extremities other than the arm, or for any purpose other than
obtaining a blood pressure measurement.
* This device is for adults. Do not use this device on neonates or infants. Do not use it on children
and adolescents unless otherwise instructed by a medical professional.
* Consult with your physician before using this monitor if you suffer from the following conditions:
common arrhythmias such as premature ventricular beats or atrial fibrillation;
peripheral arterial disease; pregnancy; preeclampsia; implantation with electrical devices;
undergoing intravascular therapy; arteriovenous shunt or mastectomy.
Please note that any of these conditions may affect measurement readings,
in addition to patient motion, trembling or shivering.
* Do not use this device for diagnosis or treatment of any health problem or disease. Contact your
physician if you have or suspect any medical problem. Do not change your medications without
the advice of your physician or health care professional.
* If you are taking medication, consult your physician to determine the proper time to measure
your blood pressure.
* This device may be used only for the intended use described in this manual, the manufacturer
shall have no liability for any incidental, consequential, or special damages caused by misuse
or abuse.
* Please use the device under the environment which is provided in the user manual. Otherwise,
the performance and lifetime of the device will be impacted and reduced.
* The device may require up to 30 minutes to warm up / cool down from the minimum/ maximum
storage temperature before it is ready for use.
* The blood pressure monitor, its adapter, and the cuff are suitable for use within the patient
environment.
* Do not wash the cuff in a washing machine or dishwasher !
* The device contains sensitive electronic components. To avoid measurement errors, avoid taking
blood pressure measurements near a strong electromagnetic field radiated interference signal
or electrical fast transient/burst signal.
* Wireless communication equipment, such as wireless home network devices, mobile phones,
FRUGOHVVWHOHSKRQHVDQGWKHLUEDVHVWDWLRQVZDONLHWDONLHVPD\FDXVHLQWHUIHUHQFHWKDWPD\
DIIHFWWKHDFFXUDF\RIPHDVXUHPHQWV$PLQLPXPGLVWDQFHRIIRRWFPVKRXOGEHNHSWIURP
such devices during a measurement.
* Blood Pressure Monitor is intended for use by medical staffs and lay persons, and patient is also
an intended user or operater.
* Do not attempt to repair the unit yourself if it malfunctions. Only have repairs carried out byauthorized
service centers.
* It is recommended that the performance should be checked after repair, maintenance, and every
two years of use, by retesting the requirements in limits of the error of the cuff pressure indication
DQGDLUOHDNDJHWHVWLQJDWOHDVWDWPP+JDQGPP+J3OHDVHFRQWDFWPDQXIDFWXUHURU
distributor for authorized service personnel.
* Store your device, cuff and adapter in a clean and dry place, protect it against extreme moisture,
heat, lint, dust and direct sunlight. Never place any heavy objects on it.
* Make sure the rubber tube of the cuff is not squeezed, stretched, or kinked during storage.
* Dispose of accessories, detachable parts, and the device according to the local guidelines.
Caution
* Do not apply the cuff on an arm that has an intravenous drip or a blood transfusion attached.
* Do not kink, fold, stretch, compress, or otherwise deform the tube during measuring, as the cuff
pressure might continuously increase, which could prevent blood flow and result injury.
* Taking blood pressure measurements too frequently could disrupt blood circulation and cause injuries.
* Do not apply cuff to areas on patient where skin is delicate or damaged. Check cuff site frequently
for irritation.
* Do not place the cuff on the arm of a person whose arteries or veins are undergoing medical
WUHDWPHQWLHLQWUDYDVFXODUDFFHVVRULQWUDYDVFXODUWKHUDS\RUDQDUWHULRYHQRXV$9VKXQW
which could disrupt blood circulation and cause injuries.
Warning
* Do not place the cuff on the arm on the same side of a mastectomy (especially when lymph nodes
KDYHEHHQUHPRYHGLWLVUHFRPPHQGHGWRWDNHPHDVXUHPHQWVRQWKHXQDIIHFWHGVLGH
* Do not wrap the cuff on the same arm to which another monitoring device is applied. One or both
devices could temporarily stop functioning if you try to use them at the same time.
3OHDVHFKHFNIRUH[DPSOHE\REVHUYDWLRQRIWKHOLPEFRQFHUQHGWKDWWKHRSHUDWLRQ
of the device does not result in prolonged impairment of patient blood circulation.
* On the rare occasion of a fault causing the cuff to remain fully inflated during measurement, loosen
and remove the cuff immediately. Prolonged high pressure applied to the arm (cuff pressure
!PP+JRUFRQVWDQWSUHVVXUH!PP+JIRUPRUHWKDQPLQXWHVPLJKWOHDGWREUXLVLQJDQG
discolored skin.
'RQRWXVHWKLVGHYLFHZLWKKLJKIUHTXHQF\+)VXUJLFDOHTXLSPHQWDWWKHVDPHWLPH
* This device is not used in conjunction with oxygen rich environments, not intended for use with
flammable anaesthetics, not intended for use in conjunction with flammable agents.
* Do not touch output of the batteries/adapter and the user simultaneously.
* The power cord is considered the disconnect device for isolating this equipment from supply mains.
Do not position the equipment so that it is difficult to reach or disconnect.
* Do not use this device if you are allergic to polyester, nylon, or plastic.
* Only use accessories approved by manufacturer. Using unapproved accessories might cause
damage to the unit and injure users.
* If you experience discomfort during a measurement, such as pain in the arm or other complaints,
press the Power button immediately to release the air from the cuff.
* Do not use the device while under maintenance, or being serviced.
* The air tube poses a risk of strangulation. Furthermore, the small parts of product and batteries
present a choking hazard if swallowed. They should therefore always be kept away from
infants/children.
* Sensor degradation or looseness may reduce performance of device or cause other problems.
<RXFDQXVHWKLVGHYLFHWRWDNH\RXURZQPHDVXUHPHQWQRWKLUGSDUW\RSHUDWRULVUHTXLUHG
* Adapter is specified as a part of ME EQUIPMENT.
* At the request of authorized service personnel, circuit diagrams, component part lists, descriptions,
and calibration procedures will be made available by the manufacturer or distributor.
* The service life of the cuff may vary by the frequency of washing, skin condition, and storage state.
* Please report to the manufacturer and the competent authority of the Member State / the FDA in
which you are established about any serious incident that has occurred in relation to this device.
Notice



INTRODUCTION INTRODUCTION
Display and Symbols
Data pending to transmit symbol
Displays when the data transmission failed. The measurements are
saved on the device and will be sent when a successful connection
is achieved.
Bluetooth symbol
Flashes when the Bluetooth is working.
User ID symbol
The user ID number appears when the monitor is operated by the
selected user.
Low Battery symbol
Indicate the battery is low when appears with "BAt Lo & ".
Date / Time display
7
Systolic blood pressure reading
Blood pressure level
See the blood pressure classifcation on page .
Diastolic blood pressure reading
Pulse display
Pulse rate appears after the measurement.
Heartbeat symbol
Flashes when decteted during a measurement.
Irregular heartbeat symbol
Appears when decteted during a measurement.
Refer to page 28 for more information.
Average value symbol
Appears when viewing the average value of the latest 7 days under
the memory mode.
1
2
3
4
5

SYMBOL EXPLANATION
Excessive body motion detector symbol
Appears when talking, moving, or shaking of the arm with the cuff on
is detected during a measurement.
NOTE: The measured blood pressure reading may not be accurate
when this symbol is displayed with the reading.
Cuff wearing OK symbol
Appears when the cuff is wrapped well.
8
9
10
12
13
14
15

11
Blood Pressure Trends
Appears when viewing the blood pressure trends
of the specified period of the past 7 days under
the memory mode.
7KH;D[LVRIWKHKLVWRJUDPUHSUHVHQWWKHWLPH
ZKLOHWKH<D[LVUHSUHVHQWVWKHYDOXHRIV\VWROLF
and diastolic pressure.
Refer to page 20 for more information.
SYMBOL EXPLANATION
Adapter power mode / Adapter error symbol
Appears when the power is supplied by AC adapter.
Or appears along with "bAt H& " to indicate the
voltage of the blood pressure monitor is high.
17
Warning Messages
Refer to page 30 for more information.
Memory symbol
Indicate it is in the memory mode and which the group of memory it is.
18
2
3
1
7
8
4
5

9
10
11
12
13
14
15

17
18
Voice broadcast
The function of voice broadcast is turned off.



In order to get the best effect and protect your monitor, please use
the right batteries and approved power adapter which complies with
local safety standard.
Installing and Replacing the Batteries
CAUTION
CAUTION
Choice of Power Supply
BEFORE YOU START
New and used batteries, or different types of batteries shall not be used together.
Remove batteries if the device is not likely to be used for some time.
Do not heat or deform the batteries, or dispose of them in fire.
Batteries should not be disposed of with household waste.
Please check with your local authority for battery recycling advice.
Name of Each Part
INTRODUCTION
•Slide off the battery cover.
•Install or replace 4 AA size batteries
according to the polarity indications
inside the battery compartment.
•Place back the battery cover.
Any time the battery is low, it will display
the icon , “ bAt Lo” & and
then power off automatically after about 5
seconds.
Replace the batteries:
• When the low battery symbol appears.
VHHWKH/&'GLVSOD\RQWKHULJKWSLFWXUH
• When any button is pressed and nothing
is displayed on the screen.
Contents/Product Includes
• Blood Pressure Monitor (TMB-2288-BT)
• Cuff (Type BF applied part)
8SSHUDUPFXIIFPRU
8SSHUDUPFXIIFPRU
8SSHUDUPFXIIFP
• User manual
• 4x AA batteries (Optional!)
• Type-C cable (Optional!)
• AC Adapter (Optional!)
5HIHUHQFHPRGHO%/-/88
1.
2.
5V 1A
Battery powered mode:
9'&î$$EDWWHULHV2SWLRQDO
AC adaptor powered mode:
(Please use the AC adapter which is
DXWKRUL]HGE\WKHPDQXIDFWXUHU
Please unplug the adaptor to depart from
the using utility power.
(Optional!
BATTERY COMPARTMENT
AC adapter
7\SH&FDEOH
CUFF
AIR HOSE
AIR CONNECTOR
PLUG
LCD DISPLAY
7\SH&SRUW
[User/Forward]
button
[Memory/Pairing/Backward]
button
[Start/Stop/Set]
button


BEFORE YOU START BEFORE YOU START
2.
Setting the Date, Time and Voice
It is important to set the date and time before using your blood pressure
monitor for the first time, so that a correct time stamp can be assigned to
each record that is stored in the memory.
7KHVHWWLQJUDQJHRIWKH\HDU²7LPHIRUPDW++
Press the “START/STOP” button to confirm the [Year], then the date
format will flash. Press the “USER” or “MEM” switch the date format
between [month/day] and [day/month]. (If the voice is on, it will broadcast
“Set the date format. You can set the format as day, month, year or month,
day and year.”）
3. Press the “START/STOP” button to confirm the date format, then the
[Month] will flash. Repeat the same steps to set the [Month] and [Day].
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³3OHDVH6HWWKHGDWH´
4. Repeat the same steps to set the time formate between[24H] and [12H].
(If the voice is on, it will broadcast “Please Set the time format.You can set
WKH>+@V\VWHPRU>+@V\VWHP´
5. Repeat the same steps to set the [Hour] and [Minute].
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³3OHDVH6HWWKHWLPH´
1. When the monitor is off, press and hold the “START/STOP” button,
it will display the bluetooth symbol first.
(If the voice is on, it will broadcast “Please set up the product before
measurement.”, “Bluetooth pairing is in progress, please wait”）
Press the “START/STOP” button again, it will skip Bluetooth pairing
and enter the [Year] setting.
(If the voice is on, it will broadcast “Please Set the year.” ）
Press the “USER” or “MEM” button to change the year.

BEFORE YOU START BEFORE YOU START
 
Setting a user ID
There are 3 user ID available. The user and , each with 250
memory spaces, are designed for 2 different people to save the measured
values separately. The user , no memory space, is reserved for guest.
2.
6. After confirming the [Minute], it will enter the voice setting. Press the
“USER” or “MEM” button to change the vocie volume.
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³3OHDVH6HWWKHYRLFHIRU\RX´
Note:
1. The date and time will automatically be set when the monitor is paired
with app. Refer to the section ”Pair a smart device with the monitor”.
2. The device can also enter the setup mode automatically when the battery
is installed for the first time.
3. You can also enter the voice settings by long pressing the “USER” button.
1. When the monitor is off, press the “USER” button to display the current
user ID. Press the “USER” button again to switch the user ID among the
user , and .
(If the voice is on, it will broadcast “Please Select the user” and broadcast the
FXUUHQWXVHU,'´
7. After confirming the voice setting, the LCD will display all the
settings you have done, and then it will display “do nE” and the
device will turn off automatically.
Volume 2
voice on
Volume 1
voice on
voice off
Press the “START/STOP” button to confirm the selected user ID, it
will enter the measurement automatically.
Press the “MEM” button to confirm the selected user ID, it will enter
the memory query automatically.
User 1 User 2
Visitor

2.
3.
Pair a smart device with the monitor
You are the intended operator of this blood pressure monitor. You can
measure your blood pressure and then save and send measurement data
WRDVPDUWGHYLFHVXFKDVVPDUWSKRQHRUWDEOHWZLWK%OXHWRRWKZLUHOHVV
connectivity.
When the monitor is off, press and hold the “MEM” button to start
pair-up, the bluetooth symbol will flash.
If successful, the bluetooth symbol will not flash any more and the
monitor will automatically shut off after about several seconds.
Note:
1. The date and time on your monitor will automatically be set after paired
with your smart device successfully.
2. The device can also enter the Bluetooth pairing automatically when the
battery is installed for the first time.
If unsuccessful ZLWKLQVHFRQGVLWLVMXGJHGWLPHRXWDQGWKHPRQLWRU
will shut off.
(If the voice is on, it will broadcast “%OXHWRRWK3DLULQJLVIDLOHGO´
1. Turn on Bluetooth and the app on your smart device.
0DNHVXUHERWKDUH21ZKHQSDLUXSLVSURFHHGLQJ
BEFORE YOU START BEFORE YOU START
 
(If the voice is on, it will broadcast “Bluetooth pairing is in progress,
SOHDVHZDLW´
(If the voice is on, it will broadcast “%OXHWRRWK3DLULQJLVVXFFHVVIXO´
1.
2.
Interference may occur in the vicinity of equipment marked with the following
V\PERO$QG70%%7PD\LQWHUIHUWKHYLFLQLW\HOHFWULFDOHTXLSPHQW
Keep the monitor at least 20 centimeters away from the human body
HVSHFLDOO\WKHKHDGZKHQWKHGDWDWUDQVPLVVLRQLVSURFHHGLQJDIWHUWKH
measurement.
To enable the data transmission function, this product should be paired to
Bluetooth end at 2.4 GHz.
How to mitigate possible interference?
The range between the device and BT end should be reasonably close, from
1 meter to 10 meters. Please ensure no obstacles between the device and BT
end so as to obtain quality connection and to lower the RF output range.
To avoid interference, other electronic devices (particularly those with
ZLUHOHVVWUDQVPLVVLRQ7UDQVPLWWHUVKRXOGEHNHSWDWOHDVWPHWHUDZD\IURP
the monitor. And BT end so as to obtain quality connection and to lower the RF
output range.
CAUTION
Bluetooth Module information：
RF Frequency Range: 2402 MHz to 2480 MHz
Output Power Range: VHHWHVWUHSRUW
6XSSO\9ROWDJH9
Transmitting Distance: 10 meters
List of compatible devices:
For iOS devices:
The operating system must be iOS 13.0 or more.
For Android devices:
The operating system must be Android 5.0 or more.


Start a measurement
Applying the cuff
2~3cm
1.
Hold your arm with your palm facing
up and tie the cuff on your upper arm,
align the Artery indicator with the
main Artery (on the inside of your arm).
Note: Locate the main Artery by pressing with
2 fingers approximately 2 cm above the bend
of your elbow on the inside of your left arm.
Identify where the pulse can be felt the
strongest, that is your main Artery！
4. Make sure the bottom edge of the
arm cuff 2 to 3 cm above the inside
elbow. Then wrap the cuff securely.
Note: The cuff should be snug but not too tight.
You should be able to insert one finger between
the cuff and your arm.
Remove all jewelry, such as watches
and bracelets from your left arm.
Note: If your doctor has diagnosed you with poor
circulation in your left arm, use your right arm.
Roll or push up your sleeve to expose
the skin. Make sure your sleeve is not
too tight.
2.
3.
5.
6.
Sit upright in a comfortable chair with
your back against the backrest of the
chair. Keep your feet flat and your legs
uncrossed.
Place your arm resting comfortably on
a flat table. The cuff worn on your arm
should be placed at the same level as
your right atrium of the heart.
Take 5-6 deep breaths and let's start
measuring!
Take the measurement in a silent room.
Wait at least 3 minutes before another measurement. This allows your blood circulation to recover.
Be relaxed and do not move and talk during the measurement procedure.
For a meaningful comparison, try to measure under similar conditions. For example, take daily
measurements at approximately the same time, on the same arm, or as directed by a physician.
Rest for 5 minutes before a measurement.
Helpful tips:
You can use your monitor without pairing to a smart device. To pair your
monitor with a smart device refer to the foregoing chapters.
1. When the monitor is off, press the “START/STOP” button to turn on
the monitor, and it will finish the whole measurement. Remain still
and do not talk until the full measurement is complete.
If the voice is on, it will speak “ Starting measurement, please remain still
and quiet” first, and then complete the measurement process.
7DNH8VHUZLWKYRFLHRQIRUH[DPSOH
MEASUREMENT
MEASUREMENT
Cuff wrap detection Inflating and measuring
(DKHDUWEHDWLVGHWHFWHG
Display and save
the measurement result
(If the voice is on,
,WZLOOEURDGFDVW\RXUPHDVXULQJUHVXOW
Only use a cuff that has been approved by the manufacturer for this device model.
Before use, please confirm if it fits your arm circumference.


MEASUREMENT MEASUREMENT
2. Press the “START/STOP” button to turn off the monitor, or it will shut
off within 1 minute.
4. About the irregular heartbeat and excessive body motion during the
measurement.
If unsuccessful ZLWKLQVHFRQGVLWLVMXGJHGWLPHRXWDQGWKHPRQLWRUZLOO
shut off. In the case of a data transmission failure, up to 250 measurements
are saved on the device and will be sent when a successful connection is
achieved.
If successful, both symbols and will disappear and the monitor will
automatically shut off.
3. If your monitor is already paired with your smart device and both
Bluetooth and app are ON, when the measurement completed, the
measurement result will start transmitting. RQO\XVHUDQGDYDLODEOH
Note
Both user and can store maximum 250 groups of record. When you
pass that limit, every time you take the measurement, the monitor will
prompt “FULL” first and the oldest record will drops from the list after the
measurement.
During a measurement, If an irregular heartbeat is detected, the symbol
will display in the measurement result. See page 28 for more information.
During a measurement, when the excessive body motion, especially of the
arm the cuff is worn is detected, the symbol will flash about 5 seconds
and detect again. If it is no longer detected, the symbol will disappear; If
still detected, the symbol will final display in the measurement result.
Note
The measured blood pressure reading may not be accurate if this symbol
is displayed.
Note
Any time, to stop the measurement, press the “START/STOP” button.
If you don’t pair with the device or don’t keep the app ON, the bluetooth
symbol will flash during the measurement.

 
The Time and Date will
display alternately.
Recall the Records
2.
3.
Press the “USER” or “MEM” button to switch the user ID between user
and . Press the “START/STOP” button to confirm the selected user ID.
4. Press the “USER” or “MEM” button to display the next record.
1. When the monitor is off, press the “MEM” button, the LCD will display
the total groups of the memory records, with the user ID blinking.
Then the LCD will display the average value of all the records of last 7
days and BP Trends chart of a specified period of last 7 days. (Example
shown below for User 1)
(If the voice is on, it will broadcast: “The average value of your measurement
IRUWKHODVWGD\VLV;;;´
Note
BP trends is a histogram, designed to display the average blood pressure
value of a specified period of last 7 days, to help the user to visually know
their blood pressure changes.
If there is no measurements for that period of time on a given day, the
histogram for that day will be blank.
)RUWKH%3WUHQGVFKDUWWKH;D[LVRIWKHKLVWRJUDPUHSUHVHQWWKHWLPH
(from left to right, from Sunday, Monday, Tuesday, Wednesday, Thursday,
)ULGD\WR6DWXUGD\ZKLOHWKH<D[LVRIWKHKLVWRJUDPUHSUHVHQWVWKH
DYHUDJHYDOXHRIV\VWROLFKLJKSUHVVXUHDQGGLDVWROLFORZSUHVVXUHRI
the specified period each day.
The data displayed on the top left is the maximum average systolic
pressure value in the past 7 days, while the bottom left is the minimum
diastolic pressure value in the past 7 days.
When the maximum average systolic pressure is higher than 170mmHg or
the maximum average diastolic pressure is higher than 110mmHg, the
symbol“ ” will be displayed.
When the minimum average systolic pressure is lower than or equal to
100mmHg, the minimum average diastolic pressure is lower than or equal
to 70mmHg, the grid corresponding to 100mmHg or 70mmHg will be lit.
DATA MANAGEMENT
DATA MANAGEMENT
The current record
is Group 1.
The corresponding
WLPHLVDP
The corresponding
date is January 1st.
The corresponding
year is 2022.
Note:
If there is untransmitted data, the symbol displays on the record.
7KHODWHVWUHFRUGLVVKRZQILUVW(DFKQHZPHDVXUHPHQWLV
DVVLJQHGWRWKHILUVWUHFRUG$OORWKHUUHFRUGVDUHSXVKHGEDFNRQH
GLJLWHJEHFRPHVDQGVRRQDQGWKHODVWUHFRUGZLOOEH
dropped from the list.
When the voice is on, it will broadcast the record for you.


DATA MANAGEMENT DATA MANAGEMENT
Delete the Records

2.
1. Enter the memory recall mode as described in the previous section
"Recall the records", find out the record you want to delete.
Delete the records by following the steps below.
3. Press the “START/STOP” button to confirm the deletion, the LCD will
display “dEL donE” and then the previous record will be displayed.
Note
Before you confirm the deletion,
you could press the “USER” or
“MEM” button to switch the LCD
display from “dEL y” to “dEL no”.
Then press the “START/STOP”
button, you could stop clearing
the memory and if the voice is on,
it will broadcast: “Cancel”.
A: Delete one record (Example shown below for User 1)
2. Press and hold the “USER” or “MEM” button about 5 seconds, the
LCD will display “dEL AL”and blink.
1. Enter the memory recall mode as described in the previous section
"Recall the records".
3. Press the “START/STOP” button to confirm the deletion, the LCD will
display “dEL donE”.
B: Delete all records (Example shown below for User 1)
Press and hold the “MEM” button about 3 seconds, the LCD will
display “dEL y” and blink.
Note
Before you confirm the deletion,
you could press the “USER” or
“MEM” button to switch the LCD
display from “dEL AL” to “dEL no”.
Then press the “START/STOP”
button, you could stop clearing
the memory and if the voice is on,
it will broadcast: “Cancel”.
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³6XFFHVVIXOO\GHOHWHG´
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³'HOHWHFXUUHQWGDWD´
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³'HOHWHDOOGDWD´
,IWKHYRLFHLVRQLWZLOOEURDGFDVW³6XFFHVVIXOO\GHOHWHG´

 
DATA MANAGEMENT
Tips for Measurement
Within 1 hour
after dinner or drinking
Within 20 minutes after taking a bath
In a very cold environment
Immediate measurement
after tea, coffee, smoking
When talking or moving your fingers
When you want to discharge urine
Measurements may be inaccurate if taken in the following
circumstances.
INFORMATION FOR USER
4. Once deleted, your readings cannot be restored. The LCD will display
“---” like the following picture.
Press the “START/STOP” button to turn off the monitor, otherwise it
will power off automatically within 1 minute.


INFORMATION FOR USER
Maintenance
In order to get the best performance, please follow the instructions
below.
What are systolic pressure and diastolic pressure?
What is the standard blood pressure classification?
When ventricles contract and pump blood out of the heart, the blood
pressure reaches its maximum value in the cycle, which is called systolic
pressure. When the ventricles relax, the blood pressure reaches its
minimum value in the cycle, which is called diastolic pressure.
press
artery vein
blood discharging
Systolic
relax
blood entering
Diastolic
The blood pressure classification published by World Health Organization
:+2DQG,QWHUQDWLRQDO6RFLHW\RI+\SHUWHQVLRQ,6+LQLVDV
follows:
ABOUT BLOOD PRESSURE
1. Cleaning Process:
Step 1: Make sure to switch off and unplug the device prior to cleaning.
Step 2: Use a soft cloth wetted with soapy water to clean the cuff first, and
then use a soft cloth wetted with clear water to remove residual
soap until there is no visible residual contaminants. Attention shall
be paid to avoid liquid invasion into the cuff.
Step 3: Use a dry soft cloth to wipe the cuff, in order to remove residual
moisture.
6WHS'U\WKHFXIIDWDZHOOYHQWLODWHGSODFHDIWHUFOHDQLQJ
2. Disinfection Process:
Step 1: Make sure to switch off and unplug the device prior to disinfection.
Step 2: Use a soft cloth wetted with 70% isopropanol to disinfect the cuff
for about 3 minutes. Attention shall be paid to avoid liquid invasion
into the cuff.
Step 3: Use a clean dry cloth or towel to wipe off the disinfectant until
there is no visible residue.
6WHS'U\WKHFXIIDWDZHOOYHQWLODWHGSODFHDIWHUGLVLQIHFWLRQ
Suggestion:
Frequency of Cleaning and Disinfection:
For single patient multiple use, it’s recommended to clean the device
surface once a month or whenever it’s necessary.
For multiple patient multiple use, it’s recommended to clean the device
every time before and after usage. Maintenance procedures shall be
taken as per instruction.


ABOUT BLOOD PRESSURE
ABOUT BLOOD PRESSURE
Why does my blood pressure
fluctuate throughout the day?
Is the result the same
if measuring on the
right arm?
Why do I get a different
blood pressure at home
compared to the hospital?
1. Individual blood pressure varies multiple
times everyday. It is also affected by the
way you tie your cuff and your measurement
position, so please take the measurement
under the same conditions.
2.If the person takes medicine, the pressure
will vary more.
3.Wait at least 3 minutes for another
measurement.
The blood pressure is different even
throughout the day due to weather,
emotion, exercise etc. Also, there is
the “white coat” effect, which means
blood pressure usually increases in
clinical settings.
It is ok for both arms, but there will
be some different results for
different people. We suggest you
measure the same arm every time.
What you need to pay attention to
when you measure your blood
pressure at home:
If the cuff is tied properly.
If the cuff is too tight or too loose.
If the cuff is tied on the upper arm.
If you feel anxious.
7DNLQJGHHSEUHDWKVEHIRUH
beginning will be better for
measuring.
$GYLFH5HOD[IRUPLQXWHV
until you calm down.
CAUTION
SYS
DIA
<120
<80










Level
Blood
Pressure
PP+J
Optimal Normal +LJKQRUPDO Mild Moderate Severe
Only a physician can tell your normal BP range. Please contact a physician if your
measuring result falls out of the range. Please note that only a physician can tell
whether your blood pressure value has reached a dangerous point.
Irregular Heartbeat Detector
An irregular heartbeat is detected when a heartbeat rhythm varies while the
unit is measuring the systolic and diastolic blood pressure. During each
measurement, the monitor records all the pulse intervals and calculate the
average; if there are two or more pulse intervals, the difference between
each interval and the average is more than the average value of ±25%, or
there are four or more pulse intervals, the difference between each interval
and the average is more than the average value of ±15%, the irregular
heartbeat symbol appears on the display when the measurement results
are appeared.
CAUTION
The appearance of the IHB icon indicates that a pulse irregularity consistent
ZLWKDQLUUHJXODUKHDUWEHDWZDVGHWHFWHGGXULQJPHDVXUHPHQW8VXDOO\WKLVLV127
a cause for concern. However, if the symbol appears often, we recommend you seek
medical advice. Please note that the device does not replace a cardiac examination,
but serves to detect pulse irregularities at an early stage.

 
If any abnormality arises during use, please check the following points:
NOTE: If the product still does not work, contact Customer Service. Under no
circumstance should you disassemble or attempt to repair the unit by yourself.
PROBLEM SYMPTOM CHECK THIS REMEDY
No power
High Battery
Low Battery
Error
message
Display can
not light up.
Batteries are depleted. Replace with new batteries.
Insert the batteries
correctly.
Replace with new batteries.
Batteries are inserted
incorrectly.
bAt Lo shows The battery is too low.
E 01 shows
E 03 shows
E 04 shows
The measurement
failed.
Adapter is inserted
incorrectly.
Insert the AC adapter
correctly.
The cuff is loose. 5HZHDUWKHFXII
before measurement.
Do not move during
measurement and
measure again.
Relax for 5 minutes and
measure again.
No pulse is detected. Wear the cuff again
before measurement.
Warning
message
Relax for a moment and
then measure again. If the
problem persists, contact
your physician.
out shows Out of measurement
range.
EExx shows
Hardware error
(XX can be some digital
symbol, such as 01, 02,
HWF
Turn off monitor and
measure again. If EExx still
appears on the display,
please contact the retailer
or our customer service.
The voltage of the blood
pressure monitor is high.
& The battery is too high. Replace with new batteries.
Replace with the authorized
adapter.
Excessive body motion
(such as shaking of the
arm with the cuff on
or weak Pulse is
GHWHFWHG
bAt H shows
E 02 or
shows
TROUBLESHOOTING SPECIFICATIONS
Type BF applied part
WARNING: No modification of this equipment is allowed.
Display mode
Measurement mode Oscillographic testing mode
Measurement range
Measurement perimeter
of the upper arm
Weight
External dimensions
Mode of operation Continuous operation
Degree of protection
Protection against
ingress of water
Accuracy
Normal working
condition
Storage & transportation
condition
Pressure:
&&ZLWKLQPP+J
Pulse value: ±5%
Device Classification
Battery Powered Mode:
Internally Powered ME Equipment
AC Adapter Powered Mode: Class II ME Equipment
About FPRUFPRUFP
IP21 It means the device could be protected against
VROLGIRUHLJQREMHFWVRIPPɎDQGJUHDWHUDQG
against vertically falling water drops.
Expected Lifetime
Types of use/reuse
Rated cuff pressure: 0 mmHg~299 mmHg
Measurement pressure:
6<6PP+JaPP+J
DIA: 40 mmHg ~ 130 mmHg
3XOVHYDOXHEHDWPLQXWH
A temperature range of: +5°C to +40°C
A relative humidity range of 15% to 90%,
QRQFRQGHQVLQJEXWQRWUHTXLULQJDZDWHUYDSRXU
partial pressure greater than 50 hPa
$QDWPRVSKHULFSUHVVXUHUDQJHRIK3DWRK3D
7HPSHUDWXUH&WR&
$UHODWLYHKXPLGLW\UDQJHRIQRQFRQGHQVLQJ
at a water vapour pressure up to 50 hPa
$QDWPRVSKHULFSUHVVXUHUDQJHRIK3DWRK3D
Device: 3 years or 30,000 measurements (may vary
EDVHGRQXVDJHFRQGLWLRQV
Cuff: 10000 times
$ONDOLQHEDWWHU\$ERXWWLPHV
Multiple patient multiple use
$SSUR[PPîPPîPP
'LJLWDO/&'9$PPîPP
$SSUR[J([FOXGLQJWKHEDWWHULHVDQGFXII
, &
&
&
&
&
&
bAt H shows

 
AUTHORIZED COMPONENT EMC GUIDANCE
Authorized Component
Please use the authorized adapter (Optional!).
For more information about our products, please visit
www.transtekcorp.com.
Contact Information
Manufactured by:
Company:
Address:
Guangdong Transtek Medical Electronics Co., Ltd.
Zone A, No.105, Dongli Road, Torch Development District,
528437 Zhongshan, Guangdong, China
Guangdong Transtek Medical Electronics Co., Ltd.
,QSXW9+]$PD[
5V 1000 mA
Adapter
Type: %/-/88
Output:
EMC Guidance
The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments.
Warning: Don’t be near the active HF surgical equipment and the RF shielded room of an
ME system for magnetic resonance imaging, where the intensity of EM disturbances is high.
Warning: Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this
equipment and the other equipment should be observed to verify that they are operating
normally.
Warning: Use of accessories, transducers and cables other than those specified or provided
by the manufacturer of this equipment could result in increased electromagnetic emissions
or decreased electromagnetic immunity of this equipment and result in improper operation.
Warning: Portable RF communications equipment (including peripherals such as antenna
FDEOHVDQGH[WHUQDODQWHQQDVVKRXOGEHXVHGQRFORVHUWKDQFPLQFKHVWRDQ\SDUW
of the equipment including cables specified by the manufacturer. Otherwise, degradation of
the performance of this equipment could result.
Technical description：
1. All necessary instructions for maintaining BASIC SAFETY and ESSENTIAL PERFOR
MANCE with regard to electromagnetic disturbances for the excepted service life.
*XLGDQFHDQGPDQXIDFWXUHU¶VGHFODUDWLRQHOHFWURPDJQHWLFHPLVVLRQVDQG,PPXQLW\
Table 1
Guidance and manufacturer’s declaration - electromagnetic emissions
RF emissions
CISPR 11
RF emissions
CISPR 11
Group 1
Class [ B ]
Class A
Comply
Compliance
Harmonic emissions
,(&
Voltage fluctuations /
flicker emissions
,(&
Emissions test

 
EMC GUIDANCE EMC GUIDANCE
Table 3
385 0.3 27
Service Modulation
 1.8
450  20.328
710 
745
780
0.2 0.3 9
810
870
930
 20.328
20.328
20.328
0.2 0.3 9
1720
1845
1970

1990
2450 
2570
5240
5500
5785

5800
Guidance and manufacturer’s declaration - electromagnetic Immunity
Test
Frequency
0+]
Radiated RF
,(&
(Test
specifications
for
ENCLOSURE
PORT
IMMUNITY to
RF wireless
FRPPXQLFDWL
ons
HTXLSPHQW
Band
0+]
Distance
P
IEC

Test Level
9P
TETRA
400
Pulse
modulation
18 Hz
*056
)56
FM ± 5k Hz
deviation
1 kHz sine
LTE Band
13,
17
Pulse
modulation
217 Hz
GSM
800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse
modulation
18 Hz
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1,
3, 4,25;
UMTS
Pulse
modulation
217 Hz
Bluetooth,
WLAN,
802.11
b/g/n, RFID
2450, LTE
Band 7
Pulse
modulation
217 Hz
WLAN
802.11
a/n
Pulse
modulation
217 Hz
Compliance
level
(V/m
27
28
9
28
Maximum
Power
:
28
9
28
Table 2
Guidance and manufacturer’s declaration – electromagnetic Immunity
Immunity Test
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 kV air
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 kV air
±2 kV for power supply lines
±1 kV signal input/output
100 kHz repetition frequency
±2 kV for power supply lines
Not Applicable
100 kHz repetition frequency
±0.5 kV, ±1 kV differential mode
±0.5 kV, ±1 kV, ±2 kV common mode
±0.5 kV, ±1 kV differential mode
Not Applicable
30 A/m
+]+]
30 A/m
+]+]
NOTE U
T
is the a.c. mains voltage prior to application of the test level.
Compliance level
Electrostatic
GLVFKDUJH(6'
,(&
Power frequency
magnetic field
,(&
Voltage dips, short
interruptions and
voltage variations
on power supply
input lines
,(&
Electrical fast
transient/burst
,(&
Surge
,(&
,(&
Test level
0% U
T ; 0,5 cycle. At 0°, 45°, 90°, 135°,
180°, 225°, 270° and 315°.
0% U
T ; 1 cycle and 70% U T ;
25/30 cycles; Single phase: at 0°.
0% U
T ; 250 / 300 cycle
0% U
T ; 0,5 cycle. At 0°, 45°, 90°, 135°,
180°, 225°, 270° and 315°.
0% U
T ; 1 cycle and 70% U T ;
25/30 cycles; Single phase: at 0°.
0% U
T ; 250 / 300 cycle
Conduced RF
,(&
3 V
0,15 MHz – 80 MHz
9LQ,60DQGDPDWHXUUDGLREDQGV
between 0,15 MHz and 80 MHz
80% AM at 1 kHz
3 V
0,15 MHz – 80 MHz
9LQ,60DQGDPDWHXUUDGLREDQGV
between 0,15 MHz and 80 MHz
80% AM at 1 kHz
10 V/m
80 MHz – 2,7 GHz
80% AM at 1 kHz
10 V/m
80 MHz – 2,7 GHz
80% AM at 1 kHz
Radiated RF
,(&

FCC Statement

FCC STATEMENT
FCC ID: OU9TMB2273BT
FCC Regulatory Compliance
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWR
which the receiver is connected.
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG
WKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJ
interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for
DQXQFRQWUROOHGHQYLURQPHQW7KLVWUDQVPLWWHUPXVWQRWEHFRORFDWHGRU
operating in conjunction with any other antenna or transmitter.
ID ISED

ID ISED
+9,170%88%T
,&$70%%7
7KLVGHYLFHFRQWDLQVOLFHQFHH[HPSWWUDQVPLWWHUVUHFHLYHUVWKDWFRPSO\ZLWK
,QQRYDWLRQ6FLHQFHDQG(FRQRPLF'HYHORSPHQW&DQDGD¶VOLFHQFHH[HPSW566V
Operation is subject to the following two conditions:
7KLVGHYLFHPD\QRWFDXVHLQWHUIHUHQFH
7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVH
undesired operation of the device.
ISED Radiation Exposure statement
7KLVHTXLSPHQWFRPSOLHVZLWK,&566UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWKIRUDQ
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0 mm between the radiator and your body.
ID ISED
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
/¶DSSDUHLOQHGRLWSDVSURGXLUHGHEURXLOODJH
/¶DSSDUHLOGRLWDFFHSWHUWRXWEURXLOODJHUDGLRpOHFWULTXHVXEL
même si le brouillage est susceptible d’en compromettre le fonctionnement.
&HWpTXLSHPHQWHVWFRQIRUPHDX[OLPLWHVGH[SRVLWLRQDX[UDGLDWLRQV,&&15
établies pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé avec une distance minimale de 0mm entre le radiateur et votre corps.