Trend Micro TippingPoint 10 User manual

TippingPoint 10 Wall and Rack Mount Installation Rev A01 1
TippingPoint 10 Wall and
Rack Mount Installation
The TippingPoint 10 wall and rack mount kit enables you to mount the TippingPoint 10 on the wall or
on a rack. The accessory kit includes:
• A mounting plate that is attached to the TippingPoint 10 and can then be attached to the wall.
• A pair of rack ears that attach to a server rack, on which the TippingPoint 10 and mounting plate can
be placed. .
Note: To use the rack ears, the TippingPoint 10 must be installed on the mounting plate
first.
Figure 1: Complete TippingPoint 10 Rack and Wall Mount Assembly With Rack Ears Attached

2 TippingPoint 10 Wall and Rack Mount Installation Rev A01
Attach the TippingPoint 10 to the Mounting Plate
Before mounting the TippingPoint 10 on a wall or attaching the rack ears, you must attach the device to
the mounting plate.
1. Place the mounting plate on a flat surface.
2. Place the TippingPoint 10 between the device brackets on the mounting plate.
3. Secure the TippingPoint 10 to the device brackets with screws.
4. Loosen the screws that secure the top of the AC power cord sufficiently to allow the AC power
cord connector to pass through. (See Figure 3, “TippingPoint 10 Power Adapter Bracket,” on
page 3.)
5. Ensure that the AC power cord is not attached to the power adapter and slide the adapter into
the bracket on the mounting plate: the power adapter in the power adapter bracket.
Figure 2: Placing the Power Adapter On the Mounting Plate

TippingPoint 10 Wall and Rack Mount Installation Rev A01 3
6. Attach the cables to the AC adapter. Refer to the following diagram:
A. Slide the AC power cord through the retention camp on the wall mount plate and plug the
cord into the AC socket on the adapter.
B. Ensure the AC adapter is securely placed and screw the retention clamp down over the
AC cord connector.
C. Route the AC power cord through the cable guides to the side of the AC adapter and con-
nect to AC power.
D. Attach the DC power output of the adapter to the back of the TippingPoint 10.
Figure 3: TippingPoint 10 Power Adapter Bracket

4 TippingPoint 10 Wall and Rack Mount Installation Rev A01
Attach the TippingPoint 10 to a Wall
To attach the TippingPoint 10 to a wall, hold the device and mounting plate vertically so that the
network ports are facing down. Use the four mounting holes in the plate to fasten the plate securely to
the wall. The screws should have a head diameter of at least 8mm (0.31 in) and a thread shaft
diamaeter of at least 4mm (0.16 in).
Figure 4: Positioning of the TippingPoint 10 On a Wall
CAUTION: When mounting the TippingPoint 10 on a wall, the device should only be
mounted with the ports facing down.

TippingPoint 10 Wall and Rack Mount Installation Rev A01 5
Attach the TippingPoint 10 to a Rack
If you plan to install the TippingPoint 10 on a rack, follow these steps to attach the ears.
1. Attach the rack mount ears to the server rack with screws.
2. Place the mounting plate containing the TippingPoint 10 on to the rack mount ears with the
ear lugs resting in the attachment holes.
3. Slide the plate forward to lock it into place on the ear lugs. .
Note: You should always attach the TippingPoint 10 to the mounting plate before
attaching the plate to the rack mount ears. The diagrams show the mounting plate and rack
mount ears without the TippingPoint 10 for demonstration purposes only.
Figure 5: Placing the Mounting Plate On the Rack Mount Ears
Figure 6: Locking the Mounting Plate On the Rack Mount Ears

6 TippingPoint 10 Wall and Rack Mount Installation Rev A01
The following figure shows the completed assembly:
Copyright © 2009 TippingPoint Technologies, Inc. TippingPoint®, the TippingPoint logo, and Digital
Vaccine® are registered trademarks of TippingPoint Technologies, Inc. or its subsidiaries. All other
company and product names may be trademarks of their respective holders. All rights reserved.
Part Number: TECHD-0310
Publication Control Number: 042709:0908
Figure 7: Mounting Plate Locked On the Rack Mount Ears
MGM