TRENDnet TBW-106UB User manual

TBW-106UB
H/W: V1
Quick Installation Guide

Table of Contents
Version 02.10.2009
English ......................................................................................................
Troubleshooting .........................................................................................
1
1
2
5
7
1. Before You Start
2. How to Install .....................................................................................
3. Configuring the Bluetooth Adapter ....................................................
................................................................................

System Requirements
1. Before You Start
English
1
Package Contents
Application
?
?Utility& Driver CD-ROM
?
TBW-106UB
Multi-Language Quick Installation
Guide
?
?USB Port: 2.0 or 1.1
?
?
CD-ROM drive
CPU: 600MHz or Above / 800MHz or Above (Windows Vista)
Memory: 256MB or Above / 512MB RAM or Above (Windows Vista)
?Hard Drive Space: 50MB or Above
?Windows 2000/XP/Vista
* Backwards compatible with USB 1.1 at 12Mbps
Keyboard
Bluetooth
Headset
Printer
(TBW-106UB)
Micro Bluetooth USB Adapter
Cell Phone

Note:
1. Do not insert the TBW-106UB USB adapter until instructed to do so.
2.If you have any Bluetooth driver (software) previously installed on your
computer or built-in Bluetooth device, please remove the driver and disable
the built-in Bluetooth device first.
2. How to Install
English
2
1. Insert the Utility & Driver
CD-ROM into your CD-ROM drive.
3. Click Install Utility.
4. Select the Language from the drop
down menu. Click OK.
2. Click Run Setup.exe (Windows
Vista).

English
3
6. Select I accept the terms in the
license agreement. Click Next
7. Follow the InstallShield Wizard
instructions and then click Finish.
5. Click Next.

English
4
10. Drivers will install automatically.
11. If this window appears, click OK.
12. Click Yes (Windows 2000 and XP
only).
9. Connect the TBW-106UB into the
computer's USB port.
8. Click Yes to restart the computer
(Windows 2000 and XP only).
Windows 2000
Windows XP

English
5
3. Configuring the Bluetooth Adapter
1. Double-click the BlueSoleil icon
on your desktop.
Note: Make sure your Bluetooth device is powered on and in pairing mode.
4. Right click on your Bluetooth
device and select Pair Device.
2. If this window appears, click OK.
3. Go to View -> Refresh Devices.

English
6
5. Type in a Passkey (for example:
0000. Please consult your
Bluetooth device's manual for more
information) and then click OK.
Then put in the same Passkey on
your Bluetooth device.
Your configuration is now complete.
For detailed information regarding the configuration and
advanced settings, please refer to the User's Guide included on the Utility &
Driver CD-ROM or TRENDnet's website at www.trendnet.com
TBW-106UB
6. Double left-click on your Bluetooth
device to show the available
services. The available services
will appear in yellow.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet

Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Windows is unable to recognize my hardware. What should I do?
First, make sure your computer meets the minimum requirements as specified
in Section 1 of this quick installation guide. Second, you must install the Bluetooth
utility BEFORE you physically install your Bluetooth Adapter. Third, plug the
adapter into a different USB slot.
The Bluetooth software is unable to detect my Bluetooth-enabled device.
What should I do?
First, disable any software firewall programs such as ZoneAlarm or Norton
Internet Security. If you have Windows XP or Vista installed on your computer,
make sure to disable the built-in firewall. Second, make sure your Bluetooth
device is powered on. Third, make sure your Bluetooth device is within 50 meters
of the TBW-106UB. Fourth, manually add in the Bluetooth device. Find out the
Mac address of your Bluetooth device. Then go to Tools -> Add New Device.
Enter the Mac Address of the Bluetooth device and then click OK.
I cannot pair my Bluetooth device to the TBW-106UB USB Adapter. What
should I do?
First, make sure that the Bluetooth device is powered on. Second, make sure
that your Bluetooth device is in pairing mode. Third, make sure to put in the same
Passkey on both devices.
I am not receiving 3Mbps data rate through the adapter. What should I do?
In order to get the full data rate, your Bluetooth device must support Bluetooth
v2.0 with Enhanced Data Rate (EDR)
If you still encounter problems or have any questions regarding the TBW-106UB, please
refer to the User's Guide included on the Utility & Driver CD-ROM or contact
TRENDnet's Technical Support Department.
7
Troubleshooting

Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.