TRENDnet TEG-ECTX User manual

TEG-ECTX
TEG-ECSX
1.01
Windows 7 Quick Installation Guide

Table of Contents
Version 11.18.2009
English 1
1. Before You Start
2. Hardware Installation 2
1
Troubleshooting 4

ENGLISH
1. Before You Start
1
?
?CPU: 1GHz or above
?Memory: 1GB or above
?RJ-45 Ethernet cable (TEG-ECTX)
?50/125ìm or 62.5/125ìm multi-mode fiber cable (TEG-ECSX)
PCI Express 1.0a slot
Application
Gigabit
Gigabit
24-Port Gigabit
Web Smart Switch
(TEG-240WS)
300Mbps Wireless N
Gigabit Router
(TEW-633GR)
1000Base-T to 1000Base-SX
Multi-Mode SC Fiber Converter
(TFC-2000MSC)
Internet
Cable/DSL
Modem
Gigabit Fiber PCI
Express Adapter
(TEG-ECSX)
Gigabit PCI
Express Adapter
(TEG-ECTX)
Package Contents
?
?
?
TEG-ECTX/TEG-ECSX
Multi-Language Quick Installation Guide
CD-ROM (Driver & User’s Guide)
System Requirements

ENGLISH
2. How to Installation
2
1. Go to
http://www.trendnet.com/download.
From the Select Product dropdown
list, scroll down until you see TEG-
ECTX or TEG-ECSX. Then click
Go. Select the hardware version of
your TEG-ECTX/TEG-ECSX, click
the Windows 7 driver link and save
the drivers to your computer.
3. Click Next. Then follow the
InstallShield Wizard instructions.
2. Browse the Windows 7 drivers
folder until you see the Setup.exe
icon. Double click on the
setup.exe icon.
Note:
1. DO NOT install the TEG-ECTX/TEG-ECSX in the computer until
instructed to do so.
2. You will need to uncompress the drivers after you download it.
4. Click OK.

ENGLISH
3
9. Drivers will install automatically.
7. Shutdown your computer and then
open your computer's case.
8. Insert the PCIE card firmly into an
available PCIe slot, and then turn
ON the computer and wait until the
Windows desktop appears.
5. Click Finish.
Your Installation is complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
For detailed information regarding the configuration and advanced
settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.
TEG-ECTX/TEG-ECSX

Troubleshooting
Windows doesn't recognize my new hardware. What should I do?
erify that your computer meets the system requirements as specified in
Section 1.
2. Go to Start -> Control Panel -> System > Hardware ->
Device Manager. In the list of device types, double-click on Network
Adapters. If you see the device with a yellow question mark or exclamation
point next to it, double-click on it, click on Drivers and click Update Drivers.
3. If the device manager fails to recognize the presence of a new networking
adapter, verify that the network adapter is firmly seated in the PCIE Slot.
Windows recognizes my new hardware, but I'm unable to connect to my network.
What should I do?
Verify that the cable is securely connected from your switch or router to
your network adapter.
2. Verify that the LEDs on your network card are lit. Third, verify that the TCP/IP
settings are set to Obtain an IP address automatically.
Why am I only getting a network connection speed of 100Mbps instead of
1000Mbps for the TEG-ECTX?
1. Check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6 E
thernet Cables. Some CAT-5 cables are not rated to run in Gigabit.
2. Make sure you are connected to a 1000Mbps switch.
I am not getting a network connection when I connect the TEG-ECSX to my
network. What should I do?
1. Check the fiber cable. Make sure you are using 50/125ìm or 62.5/125ìm multi-
mode fiber cable.
2. Make sure that the opposing connection is Gigabit multi-mode fiber connection.
The TEG-ECSX will not auto negotiate to 10 or 100Mbps.
What is the maximum distance that is supported by the adapters?
TEG-ECTX: 100 Meters. TEG-ECSX: 550 meters.
If you still encounter problems or have any questions regarding the TEG-ECTX/TEG-
ECSX, please contact TRENDnet's Technical Support Department.
1. V
1.
4

Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.

Copyright ©2009. All Rights Reserved. TRENDnet.
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register